And naturally I attached the wrong files, apart from the mistyping of install42.iso.
Here's the dmesg from the working kernel. TQ > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Taisto Qvist XX > Sent: den 5 december 2007 13:14 > To: misc@openbsd.org > Subject: AMD GEODE LX-800 just works with kernel from > install42.iso and kernelpanics with powersave on. > > Hi Folks, > > I am running, or at least trying to run, OpenBSD 4.2 on a > minipc using AMD's GEODE LX-800. > (Its a > http://www.sdlsystem.se/shop/product_info.php?cPath=23_56&prod > ucts_id=65 > 6 ) > > At first I had almost given up, since trying to boot the > system was impossible since I always got a kernel-panic just > a few seconds into the booting. > Similar problems with both FreeBSD and NetBSD, <whisper>but > linux worked w/o issues.</whisper> > > But after booting with all powersave turned off, everything > looked good though, and I could finally start to install and > configure....almost. > > After building a new custom kernel that didnt work properly, > re-trying with the GENERIC kernel that can be downloaded from > the i386 install-directory(didnt work), rebuilding a new > GENERIC kerneln (didnt work), I finally managed to understand > that the ONLY to kernels I can boot with, is either the > bsd.rd ramdisk, or the bsd-kernel thats stored in the install32.iso!?! > > All the others startup fine, no problem, but the network > interfaces( realtek, rl0-3) cant be configured! Dmesg looks > almost identical for a working and non-working kernel, but > with all the nonworking one's, i just get > > # ifconfig -a > : no such interface. > > Not even loopback gets created! > > It looks like the working kernel is from 4.2-current, so I am > really just wondering wether this is my only solution, to > start running -current, or if there is a bug somewhere that > might be fixed....if nothing else, it would be nice to be > able to turn on power-save functions on the box again. > > Any thoughts? (attaching the two dmesgs...) > > Regards > Taisto Qvist > > <<dmesg.515.txt>> <<dmesg.375.txt>> > OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007 > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Geode(TM) Integrated Processor by AMD PCS > ("AuthenticAMD" 586-class) 499 MHz > cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX > real mem = 1047097344 (998MB) > avail mem = 1004806144 (958MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 06/05/07, BIOS32 rev. 0 > @ 0xf0010, SMBIOS rev. 2.5 @ 0xf9580 (53 entries) > bios0: vendor American Megatrends Inc. version "080014 " date > 06/05/2007 > bios0: Advanced Micro Devices, Inc. Geode LX Norwich > Development Board pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3ab0/144 (7 entries) > pcibios0: no compatible PCI ICU found: ICU vendor 0x1022 > product 0x2090 > pcibios0: Warning, unable to fix up PCI interrupt routing > pcibios0: PCI bus #0 is the last bus > bios0: ROM list: 0xc0000/0x8000 > cpu0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at > pci0 dev 1 function 0 "AMD Geode LX" rev 0x31 > vga1 at pci0 dev 1 function 1 "AMD Geode LX Video" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) glxsb0 > at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG > AES rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: > irq 15, address 00:04:a7:04:da:2f rlphy0 at rl0 phy 0: RTL > internal PHY > rl1 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: irq 5, > address 00:04:a7:04:da:30 > rlphy1 at rl1 phy 0: RTL internal PHY > rl2 at pci0 dev 12 function 0 "Realtek 8139" rev 0x10: irq > 11, address 00:04:a7:04:da:31 > rlphy2 at rl2 phy 0: RTL internal PHY > rl3 at pci0 dev 13 function 0 "Realtek 8139" rev 0x10: irq > 10, address 00:04:a7:04:da:32 > rlphy3 at rl3 phy 0: RTL internal PHY > pcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03 > pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: > DMA, channel 0 wired to compatibility, channel 1 wired to > compatibility wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM120JC> > wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 ignored (disabled) > ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: > irq 10, version 1.0, legacy support ehci0 at pci0 dev 15 > function 5 "AMD CS5536 USB" rev 0x02: irq 10 usb0 at ehci0: > USB revision 2.0 uhub0 at usb0: AMD EHCI root hub, rev > 2.00/1.00, addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at > isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 > at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at > pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port > 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 > port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1: AMD OHCI root hub, rev 1.00/1.00, addr 1 > biomask 774d netmask ff6d ttymask ffef > pctr: user-level cycle counter enabled > mtrr: K6-family MTRR support (2 registers) umass0 at uhub0 > port 2 configuration 1 interface 0 > umass0: LaCie LaCie DVDRW USB, rev 2.00/0.00, addr 2 > umass0: using ATAPI over Bulk-Only > scsibus0 at umass0: 2 targets > cd0 at scsibus0 targ 1 lun 0: <_NEC, DVD+-RW ND-6650A, 1.23> > SCSI0 5/cdrom removable > dkcsum: wd0 matches BIOS drive 0x80 > root on wd0a swap on wd0b dump on wd0b > OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007 > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Geode(TM) Integrated Processor by AMD PCS > ("AuthenticAMD" 586-class) 499 MHz > cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX > real mem = 1047097344 (998MB) > avail mem = 1004806144 (958MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 06/05/07, BIOS32 rev. 0 > @ 0xf0010, SMBIOS rev. 2.5 @ 0xf9580 (53 entries) > bios0: vendor American Megatrends Inc. version "080014 " date > 06/05/2007 > bios0: Advanced Micro Devices, Inc. Geode LX Norwich > Development Board pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3ab0/144 (7 entries) > pcibios0: no compatible PCI ICU found: ICU vendor 0x1022 > product 0x2090 > pcibios0: Warning, unable to fix up PCI interrupt routing > pcibios0: PCI bus #0 is the last bus > bios0: ROM list: 0xc0000/0x8000 > cpu0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at > pci0 dev 1 function 0 "AMD Geode LX" rev 0x31 > vga1 at pci0 dev 1 function 1 "AMD Geode LX Video" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) glxsb0 > at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG > AES rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: > irq 15, address 00:04:a7:04:da:2f rlphy0 at rl0 phy 0: RTL > internal PHY > rl1 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: irq 5, > address 00:04:a7:04:da:30 > rlphy1 at rl1 phy 0: RTL internal PHY > rl2 at pci0 dev 12 function 0 "Realtek 8139" rev 0x10: irq > 11, address 00:04:a7:04:da:31 > rlphy2 at rl2 phy 0: RTL internal PHY > rl3 at pci0 dev 13 function 0 "Realtek 8139" rev 0x10: irq > 10, address 00:04:a7:04:da:32 > rlphy3 at rl3 phy 0: RTL internal PHY > pcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03 > pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: > DMA, channel 0 wired to compatibility, channel 1 wired to > compatibility wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM120JC> > wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 ignored (disabled) > ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: > irq 10, version 1.0, legacy support ehci0 at pci0 dev 15 > function 5 "AMD CS5536 USB" rev 0x02: irq 10 usb0 at ehci0: > USB revision 2.0 uhub0 at usb0: AMD EHCI root hub, rev > 2.00/1.00, addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at > isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 > at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at > pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port > 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 > port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1: AMD OHCI root hub, rev 1.00/1.00, addr 1 > biomask 774d netmask ff6d ttymask ffef > pctr: user-level cycle counter enabled > mtrr: K6-family MTRR support (2 registers) umass0 at uhub0 > port 2 configuration 1 interface 0 > umass0: LaCie LaCie DVDRW USB, rev 2.00/0.00, addr 2 > umass0: using ATAPI over Bulk-Only > scsibus0 at umass0: 2 targets > cd0 at scsibus0 targ 1 lun 0: <_NEC, DVD+-RW ND-6650A, 1.23> > SCSI0 5/cdrom removable > dkcsum: wd0 matches BIOS drive 0x80 > root on wd0a swap on wd0b dump on wd0b OpenBSD 4.2-current (GENERIC) #515: Tue Nov 13 14:07:23 MST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 499 MHz cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX real mem = 1047097344 (998MB) avail mem = 1004634112 (958MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 06/05/07, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.5 @ 0xf9580 (53 entries) bios0: vendor American Megatrends Inc. version "080014" date 06/05/2007 bios0: Advanced Micro Devices, Inc. Geode LX Norwich Development Board pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3ab0/144 (7 entries) pcibios0: no compatible PCI ICU found: ICU vendor 0x1022 product 0x2090 pcibios0: Warning, unable to fix up PCI interrupt routing pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc0000/0x8000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31 vga1 at pci0 dev 1 function 1 "AMD Geode LX Video" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: irq 15, address 00:04:a7:04:da:2f rlphy0 at rl0 phy 0: RTL internal PHY rl1 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: irq 5, address 00:04:a7:04:da:30 rlphy1 at rl1 phy 0: RTL internal PHY rl2 at pci0 dev 12 function 0 "Realtek 8139" rev 0x10: irq 11, address 00:04:a7:04:da:31 rlphy2 at rl2 phy 0: RTL internal PHY rl3 at pci0 dev 13 function 0 "Realtek 8139" rev 0x10: irq 10, address 00:04:a7:04:da:32 rlphy3 at rl3 phy 0: RTL internal PHY glxpcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03: rev 0, 32-bit 3579545Hz timer, watchdog pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM120JC> wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 10, version 1.0, legacy support ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 10 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1 isa0 at glxpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom0: probed fifo depth: 0 bytes usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1 biomask 774d netmask ff6d ttymask ffef mtrr: K6-family MTRR support (2 registers) scsibus0 at umass0: 2 targets cd0 at scsibus0 targ 1 lun 0: <_NEC, DVD+-RW ND-6650A, 1.23> SCSI0 5/cdrom removable dkcsum: wd0 matches BIOS drive 0x80 root on wd0a swap on wd0b dump on wd0b
