Greetings,
Replaced the suspected CDR/DVD drive with another (known good working
condition) Panasonic DVD (SATA) drive, the same result, install fails at the
point of accessing the CD to install the software sets, so I swapped
back the
original (TSSTcorp) CDR/DVD drive.
Below is the the full dmesg - after a successful ftp install:
--------------------------------------------------------------------------------------------------------
Last login: Fri Dec 14 01:47:54 2007
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
Welcome to OpenBSD: The proactively secure Unix-like operating system.
Please use the sendbug(1) utility to report bugs in the system.
Before reporting a bug, please try to reproduce it with the latest
version of the code. With bug reports, please try to ensure that
enough information to reproduce the problem is enclosed, and if a
known fix for it exists, include that as well.
Terminal type? [vt100]
#
dmesg
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz ("GenuineIntel" 686-class)
1.87 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 1047822336 (999MB)
avail mem = 1005506560 (958MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/13/07, BIOS32 rev. 0 @ 0xea0a0,
SMBIOS rev. 2.4 @ 0xeb960 (66 entries)
bios0: vendor Hewlett-Packard version "786E1 v01.10" date 04/13/2007
bios0: Hewlett-Packard HP Compaq dc7700 Small Form Factor
pcibios0 at bios0: rev 3.0 @ 0xea0a0/0x5de0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfe4c0/288 (16 entries)
_pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x2814_
_pcibios0: Warning, unable to fix up PCI interrupt routing_
pcibios0: PCI bus #32 is the last bus
bios0: ROM list: 0xc0000/0xb000! 0xcb000/0x1000 0xcc000/0x1000
0xcd000/0x800 0xe7600/0x8a00!
acpi at mainbus0 not configured
cpu0 at mainbus0
cpu0: Enhanced SpeedStep disabled by BIOS
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82Q963 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82Q963 Graphics" rev 0x02: aperture
at 0xf0400000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
_"Intel 82Q963 HECI" rev 0x02 at pci0 dev 3 function 0 not configured_
em0 at pci0 dev 25 function 0 "Intel ICH8 IGP AMT" rev 0x02: irq 5,
address 00:1b:78:aa:35:32
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: irq 5
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: irq 11
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02
pci1 at ppb0 bus 32
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: irq 5
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: irq 11
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: irq 5
usb1 at ehci1: USB revision 2.0
uhub1 at usb1: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xf2
pci2 at ppb1 bus 7
skc0 at pci2 dev 9 function 0 "3Com 3c940" rev 0x10, Yukon (0x1): irq 11
sk0 at skc0 port A: address 00:0a:5e:1a:5d:9e
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
pcib0 at pci0 dev 31 function 0 "Intel 82801HO LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using irq 5 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST380815AS>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDW/DVD TS-H493A, CD06> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask ef6d netmask ef6d ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
----------------------------------------------------------
a) there are problems with the PCI interrupt routing;
b) unconfigured device reported: "Intel 82Q963 HECI" rev 0x02 at pci0
dev 3 function 0 not configured;
c) after the ftp-install/halt/reboot the /dev/cd0a is works perfectly,
I can mount the
install CD (the copy of the original - initially I try to install from),
and successfully
installed a few packages, like bash, bzip, snort, squid, mutt,
fetchmail, rsync, zip,
etc. from the CD:
# pkg_add -v bash-3.2.17.tgz
parsing bash-3.2.17.tgz
Dependencies for bash-3.2.17 resolve to: gettext-0.14.6p0,
libiconv-1.9.2p3 (todo: libiconv-1.9.2p3,gettext-0.14.6p0)
bash-3.2.17:parsing libiconv-1.9.2p3
found libspec c.41.0 in /usr/lib
bash-3.2.17:libiconv-1.9.2p3: complete
bash-3.2.17:parsing gettext-0.14.6p0
Dependencies for gettext-0.14.6p0 resolve to: libiconv-1.9.2p3
found libspec c.41.0 in /usr/lib
found libspec expat.8.0 in /usr/X11R6/lib
found libspec iconv.4.0 in package libiconv-1.9.2p3
bash-3.2.17:gettext-0.14.6p0: complete
found libspec c.41.0 in /usr/lib
found libspec iconv.4.0 in package libiconv-1.9.2p3
found libspec intl.3.0 in package gettext-0.14.6p0
found libspec termcap.10.0 in /usr/lib
Shell /usr/local/bin/bash appended to /etc/shells
bash-3.2.17: complete
I conclude that there is a bug handling the SATA(nic) CD/DVD devices
during install.
Ioan
