On Dec 15, 2007 8:22 PM, vladas <[EMAIL PROTECTED]> wrote: > Hi, > > Should not both - fxp0 and re0 - autoselect 1000baseT by > default by the dhclient? Both are connected to the same 1000M switch, > no other tweaks in GENERIC's setup: > re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:16:01:3d:7f:a6 > media: Ethernet autoselect (100baseTX full-duplex,rxpause,txpause)
Verify the settings on your switch port that re0 connects to and verify you've got nothing but autonegotiation selected. If you've got an unmanaged/unmanageable switch, that should certainly be the case. If it's manageable, at least see if you can determine the negotiated state on the switch port. Although my understanding of the specs re: GigE was that a mismatch would result in no link, not a mismatch. You running current switch firmware? DS