Hi,
I'm trying to use the 4.2 mp kernel on an Intel D945GNT Motherboard with
a 2.8GHz processor and it panics during the boot. The single processor
kernel boots fine!
I've found reference to a problem with 4.1 that doesn't seem to be
resolved but google isn't helping me beyond that.
Here's the panic:
Anyone got a clue for me?
--------------------
booting hd0a:/bsd: 5707128+882040 [52+294208+275118]=0x6d3c88
entry point at 0x200120
[ using 569752 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.2 (GENERIC.MP) #252: Tue Aug 28 10:53:04 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class) 2.81
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID
,CX16,xTPR
real mem = 2137022464 (2038MB)
avail mem = 2058711040 (1963MB)
RTC BIOS diagnostic error 80<clock_battery>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/08/06, SMBIOS rev. 2.3 @
0xe3510 (34 entries)
bios0: vendor Intel Corp. version "NT94510J.86A.3630.2006.0308.1335"
date 03/08/2006
bios0: Intel Corporation D945GNT
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown, estimated 0:00 hours
apm0: flags 30102 dobusy 0 doidle 1
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xae00! 0xcb000/0x1000 0xcc000/0x1000
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GP" rev 0x02: rng active,
8000000Kb/sec
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02: aperture at
0x80000000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev
0x01pci_intr_map: bus 0 dev 27 func 0 pin 1; line 9
pci_intr_map: no MP mapping found
panic: no isa bus
Stopped at Debugger+0x4: leave
Debugger(0,d08d5c37,64,9,d04a6fa8) at Debugger+0x4
panic(d07208c9,390009,d08d5c68,d29a9f80,0) at panic+0x63
isa_intr_establish(0,9,3,a0,d04a6fa8,d29d2000,d29d2014,9) at
isa_intr_establish
+0x1f3
pci_intr_establish(0,8000d800,9,1,0,a0,d04a6fa8,d29d2000,d29d2014,d08d5c
f0,44,d
29d2000) at pci_intr_establish+0x54
azalia_pci_attach(d29bcf00,d29d2000,d08d5d70,d29bcf00,8000d800) at
azalia_pci_a
ttach+0x110
config_attach(d29bcf00,d0751870,d08d5d70,d048d5dc) at config_attach+0xfd
pci_probe_device(d29bcf00,8000d800,0,0,0) at pci_probe_device+0x147
pci_enumerate_bus(d29bcf00,0,0,d29bbfc0,f) at pci_enumerate_bus+0xef
config_attach(d29bbfc0,d0751510,d08d5e80,d048d360) at config_attach+0xfd
mainbus_attach(0,d29bbfc0,0,e61bf000,d08d4330) at mainbus_attach+0x1f7
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS
PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb{0}> trace
Debugger(0,d08d5c37,64,9,d04a6fa8) at Debugger+0x4
panic(d07208c9,390009,d08d5c68,d29a9f80,0) at panic+0x63
isa_intr_establish(0,9,3,a0,d04a6fa8,d29d2000,d29d2014,9) at
isa_intr_establish
+0x1f3
pci_intr_establish(0,8000d800,9,1,0,a0,d04a6fa8,d29d2000,d29d2014,d08d5c
f0,44,d
29d2000) at pci_intr_establish+0x54
azalia_pci_attach(d29bcf00,d29d2000,d08d5d70,d29bcf00,8000d800) at
azalia_pci_a
ttach+0x110
config_attach(d29bcf00,d0751870,d08d5d70,d048d5dc) at config_attach+0xfd
pci_probe_device(d29bcf00,8000d800,0,0,0) at pci_probe_device+0x147
pci_enumerate_bus(d29bcf00,0,0,d29bbfc0,f) at pci_enumerate_bus+0xef
config_attach(d29bbfc0,d0751510,d08d5e80,d048d360) at config_attach+0xfd
mainbus_attach(0,d29bbfc0,0,e61bf000,d08d4330) at mainbus_attach+0x1f7
config_attach(0,d07514ec,0,0,d07972a0) at config_attach+0xfd
config_rootfound(d06a5444,0,d08d5f38,d0460686) at config_rootfound+0x27
cpu_configure(0,1,3,0,4) at cpu_configure+0x29
main(0,0,0,0,0) at main+0x389
ddb{0}> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
* 0 -1 0 0 7 0x80200 swapper
ddb{0}>
------------
