On Thu, 31 Jan 2008, Richard Daemon wrote:
If you do test with standard release, please let me know the results,
especially if it's on a standard PC - I'm out of systems to test with... :-(
Here it comes, the following dmesg is again from eee, installed an
original 4.2 from cd on the usb stick.
While trying to use the ethernet, it didn't work, I was unable to see
the interface. According to the manual of the lii, this driver will be
new in 4.3, so it's nice that the driver in the snapshot is already
working.
The wireless is identified as ath0 again but setting it up freezes the
eee. This didn't happen with the snapshot, but there I was unable to set
it, too (hardware reset...).
Short description for you, I booted the 4.2 install cd i386 in a vmware
workstation and chose sd1 as install destination. Created the same as
with the snapshot and rebooted again. Mount the stick an changed again
in /etc/fstab from sd1a to sd0a an the 4.2 booted on the eee.
So if you want to use OpenBSD on the eee, you should take the actual
snapshot, maybe there will be some changes according to the wireless
driver. If someone needs tests with changed drivers or anything, I can
take a snapshot each week an try again if the wireless starts working.
Oh yes, the dmesg... (original 4.2 CD-release)
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 900MHz ("GenuineIntel" 686-class) 631 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem = 527527936 (503MB)
avail mem = 502427648 (479MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/04/08, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.5 @ 0xf06c0 (37 entries)
bios0: vendor American Megatrends Inc. version "0703 " date 01/04/2008
bios0: ASUSTeK Computer INC. 701
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf76b0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xf800!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM/PM/GMS Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915GM/GMS Video" rev 0x04: aperture at
0xd0000000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82915GM/GMS Video" rev 0x04 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: irq 5
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Realtek/0x0662 (rev. 1.1), HDA version 1.0
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04
pci2 at ppb1 bus 3
vendor "Attansic Technology", unknown product 0x2048 (class network subclass
ethernet, rev 0xa0) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04
pci3 at ppb2 bus 1
ath0 at pci3 dev 0 function 0 "Atheros AR5424" rev 0x01: irq 10
ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR0W, address 00:15:af:75:d9:e0
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: irq 3
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: irq 7
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: irq 10
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: irq 5
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: irq 3
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci4 at ppb3 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <SILICONMOTION SM223AC>
wd0: 1-sector PIO, LBA, 3815MB, 7815024 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: irq 7
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 3 configuration 1 interface 0
umass0: USBest Technology USB Mass Storage Device, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets
sd0 at scsibus0 targ 1 lun 0: <Ut163, USB2FlashStorage, 0.00> SCSI2 0/direct
removable
sd0: 963MB, 122 cyl, 255 head, 63 sec, 512 bytes/sec, 1974271 sec total
umass1 at uhub0 port 5 configuration 1 interface 0
umass1: ENE UB6225, rev 2.00/1.00, addr 3
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets
sd1 at scsibus1 targ 1 lun 0: <USB2.0, CardReader SD0, 0100> SCSI0 0/direct
removable
sd1: 982MB, 125 cyl, 255 head, 63 sec, 512 bytes/sec, 2012160 sec total
dkcsum: wd0 matches BIOS drive 0x81
dkcsum: sd0 matches BIOS drive 0x80
dkcsum: sd1 matches BIOS drive 0x82
root on sd0a swap on sd0b dump on sd0b
--
andre