Hey misc, so I know there is a better way to posting Bugs. But i not really got all information needed to post it to bugs@ or better: i have the information in a unpropper way. So I dont really mind if you not answer i just thought it would be a nice information that my panic happened.
So I installed OpenBSD as an internet router on a sony vaio laptop (dmesg see end of mail). I enabled ip-forwarding and it runs a now a hour and then it paniced. Its the first time and it could be that the error comes from the hardware. Here is a pic from the panic (ddb trace) http://www-stud.hs-fulda.org/~gsus/ddb.jpg Here the dmesg: OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: mobile AMD Athlon(tm) XP 1600+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.41 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real mem = 267939840 (255MB) avail mem = 251437056 (239MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 08/13/02, BIOS32 rev. 0 @ 0xfd6a0, SMBIOS rev. 2.3 @ 0xdc010 (41 entries) bios0: vendor Sony Corporation version "R0121K5 " date 08/13/2002 bios0: Sony Corporation PCG-FX805(DE) apm0 at bios0: Power Management spec V1.2 apm0: battery life expectancy 74% apm0: AC on, battery charge high, charging apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xfd6a0/0x960 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf60/128 (6 entries) pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00) pcibios0: PCI bus #3 is the last bus bios0: ROM list: 0xc0000/0x10000 0xd0000/0x4000! 0xdc000/0x4000! cpu0 at mainbus0 cpu0: PowerNow! K7 1401 MHz: speeds: 1400 1200 1000 800 600 500 MHz pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "VIA VT8363 Host" rev 0x03 ppb0 at pci0 dev 1 function 0 "VIA VT8363 AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Mobility 1" rev 0x64 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 7 function 0 "VIA VT82C686 ISA" rev 0x40 pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <IC25N030ATCS04-0> wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA730 DVD/CDRW, 1.00> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x1a: irq 9 uhci1 at pci0 dev 7 function 3 "VIA VT83C572 USB" rev 0x1a: irq 9 viaenv0 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x40: 32-bit timer at 3579545Hz auvia0 at pci0 dev 7 function 5 "VIA VT82C686 AC97" rev 0x50: irq 5 ac97: codec id 0x41445348 (Analog Devices AD1881A) ac97: codec features headphone, Analog Devices Phat Stereo audio0 at auvia0 "VIA VT82C686 Modem" rev 0x30 at pci0 dev 7 function 6 not configured cbb0 at pci0 dev 10 function 0 "TI PCI1420 CardBus" rev 0x00: irq 9 cbb1 at pci0 dev 10 function 1 "TI PCI1420 CardBus" rev 0x00: irq 10 "TI TSB12LV26 FireWire" rev 0x00 at pci0 dev 14 function 0 not configured rl0 at pci0 dev 16 function 0 "Realtek 8139" rev 0x10: irq 10, address 08:00:46:70:66:52 rlphy0 at rl0 phy 0: RTL internal PHY isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec usb0 at uhci0: USB revision 1.0 uhub0 at usb0: VIA UHCI root hub, rev 1.00/1.00, addr 1 usb1 at uhci1: USB revision 1.0 uhub1 at usb1: VIA UHCI root hub, rev 1.00/1.00, addr 1 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20 pcmcia0 at cardslot0 cardslot1 at cbb1 slot 1 flags 0 cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0x20 pcmcia1 at cardslot1 biomask ff4d netmask ff4d ttymask ffcf pctr: user-level cycle counter enabled mtrr: Pentium Pro MTRR support ath0 at cardbus0 dev 0 function 0 "Atheros Communications, Inc., AR5001-0000-0000, Wireless LAN Reference Card": irq 9 ath0: AR5213 7.9 phy 4.5 rf2112a 5.6, FCC2A*, address 00:14:6c:21:b5:3e ep1 at pcmcia1 function 0 "3Com, Megahertz 574B, B" port 0xa000/32: address 00:10:5a:d3:ac:f6 tqphy0 at ep1 phy 0: 78Q2120 10/100 PHY, rev. 10 uhub2 at uhub0 port 1: Alps Electric Hub in Apple USB Keyboard, rev 1.10/2.10, addr 2 uhidev0 at uhub2 port 1 configuration 1 interface 0 uhidev0: Alps Electric Apple USB Keyboard, rev 1.10/1.02, addr 3, iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 13 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 dkcsum: wd0 matches BIOS drive 0x80 root on wd0a swap on wd0b dump on wd0b WARNING: / was not properly unmounted
