On Fri, Feb 15, 2008 at 10:03:29AM +0100, Jordi Espasa Clofent wrote:
>> You forgot to say which version of OpenBSD you're using.
>> halt -p works fine on my amd64 using -current.
>
> Yep, you've all the reason. Here is dmesg:
>
> $ dmesg
> OpenBSD 4.2-stable (GENERIC) #0: Thu Feb 14 18:44:44 CET 2008
halt -p also broken here, but on i386. It reboots instead and always has done.
This is running a snapshot i downloaded yesterday:
OpenBSD 4.2-current (GENERIC) #652: Mon Jan 28 14:04:36 MST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 2397855744 (2286MB)
avail mem = 2310926336 (2203MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/05/04, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.3 @ 0xfbe40 (76 entries)
bios0: vendor Intel Corp. version "BF86510A.86A.0058.P15.0404050012"
date 04/05/2004
bios0: Intel Corporation D865GLC
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3d00/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev
0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xa200! 0xca800/0x1000 0xcb800/0x2800
0xce000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02
agp0 at pchb0: aperture at 0xf0000000, size 0x8000000
vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 3 function 0 "Intel 82865G CSA" rev 0x02
pci1 at ppb0 bus 1
em0 at pci1 dev 1 function 0 "Intel PRO/1000CT (82547EI)" rev 0x00: irq
10, address 00:0c:f1:f5:13:3c
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 5
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 10
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 9
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci2 at ppb1 bus 2
ahc0 at pci2 dev 1 function 0 "Adaptec AHA-2940" rev 0x00: irq 11
scsibus0 at ahc0: 8 targets
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02:
24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6E040L0>
wd0: 16-sector PIO, LBA, 39205MB, 80293248 sectors
wd1 at pciide0 channel 0 drive 1: <HDS728080PLAT20>
wd1: 16-sector PIO, LBA48, 78533MB, 160836480 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
wd2 at pciide0 channel 1 drive 0: <IC35L060AVV207-0>
wd2: 16-sector PIO, LBA48, 58644MB, 120103200 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-M1302, 1006> SCSI0
5/cdrom removable
wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 10 for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq
3
iic0 at ichiic0
adt0 at iic0 addr 0x2e: emc6d100 rev 0x65
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem2 at iic0 addr 0x52: 256MB DDR SDRAM non-parity PC2700CL2.5
spdmem3 at iic0 addr 0x53: 1GB DDR SDRAM non-parity PC3200CL3.0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ff6d netmask ff6d ttymask ffef
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Sun Microsystems
Type 6 Keyboard" rev 1.00/1.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, layout 32
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhub5 at uhub1 port 1 "ALCOR Generic USB Hub" rev 1.10/3.12 addr 2
uaudio0 at uhub3 port 2 configuration 1 interface 0 "M Audio MobilePre"
rev 1.10/1.03 addr 2
uaudio0: audio rev 1.00, 9 mixer controls
audio0 at uaudio0
uhidev1 at uhub5 port 1 configuration 1 interface 0 "Sun Microsystems
Type 6 Mouse" rev 1.00/1.02 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
kqemu: kqemu version 0x00010300 loaded, max locked mem=1170828kB
DDB symbols added: 307280 bytes
syncing disks... done
rebooting...
OpenBSD 4.2-current (RAMDISK_CD) #613: Mon Jan 28 14:26:48 MST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 2397855744 (2286MB)
avail mem = 2312794112 (2205MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/05/04, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.3 @ 0xfbe40 (76 entries)
bios0: vendor Intel Corp. version "BF86510A.86A.0058.P15.0404050012"
date 04/05/2004
bios0: Intel Corporation D865GLC
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3d00/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev
0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xa200! 0xca800/0x1000 0xcb800/0x2800
0xce000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02
agp at pchb0 not configured
vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ppb0 at pci0 dev 3 function 0 "Intel 82865G CSA" rev 0x02
pci1 at ppb0 bus 1
em0 at pci1 dev 1 function 0 "Intel PRO/1000CT (82547EI)" rev 0x00: irq
10, address 00:0c:f1:f5:13:3c
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 5
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 10
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 9
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci2 at ppb1 bus 2
ahc0 at pci2 dev 1 function 0 "Adaptec AHA-2940" rev 0x00: irq 11
scsibus0 at ahc0: 8 targets
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02:
24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6E040L0>
wd0: 16-sector PIO, LBA, 39205MB, 80293248 sectors
wd1 at pciide0 channel 0 drive 1: <HDS728080PLAT20>
wd1: 16-sector PIO, LBA48, 78533MB, 160836480 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
wd2 at pciide0 channel 1 drive 0: <IC35L060AVV207-0>
wd2: 16-sector PIO, LBA48, 58644MB, 120103200 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-M1302, 1006> SCSI0
5/cdrom removable
wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 10 for native-PCI interrupt
"Intel 82801EB/ER SMBus" rev 0x02 at pci0 dev 31 function 3 not
configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ffed netmask ffed ttymask ffef
rd0: fixed, 3800 blocks
uhidev0 at uhub2 port 1 configuration 1 interface 0 "vendor 0x0430
product 0x0005" rev 1.00/1.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhub5 at uhub1 port 1 "ALCOR Generic USB Hub" rev 1.10/3.12 addr 2
"M Audio MobilePre" rev 1.10/1.03 addr 2 at uhub3 port 2 not configured
uhidev1 at uhub5 port 1 configuration 1 interface 0 "vendor 0x0430
product 0x0100" rev 1.00/1.02 addr 3
uhidev1: iclass 3/1
uhid at uhidev1 not configured
umass0 at uhub5 port 4 configuration 1 interface 0 "Easy Disk" rev
2.00/1.10 addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd0 at scsibus2 targ 1 lun 0: <Easy, Disk, V1.1> SCSI0 0/direct
removable
sd0: 3936MB, 501 cyl, 255 head, 63 sec, 512 bytes/sec, 8060928 sec total
root on rd0a swap on rd0b dump on rd0b
sd0 detached
scsibus2 detached
umass0 detached
syncing disks... done
rebooting...
OpenBSD 4.2-current (GENERIC) #657: Mon Feb 11 19:17:03 MST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 2397855744 (2286MB)
avail mem = 2310926336 (2203MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/05/04, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.3 @ 0xfbe40 (76 entries)
bios0: vendor Intel Corp. version "BF86510A.86A.0058.P15.0404050012"
date 04/05/2004
bios0: Intel Corporation D865GLC
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3d00/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev
0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xa200! 0xca800/0x1000 0xcb800/0x2800
0xce000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02
agp0 at pchb0: aperture at 0xf0000000, size 0x8000000
vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 3 function 0 "Intel 82865G CSA" rev 0x02
pci1 at ppb0 bus 1
em0 at pci1 dev 1 function 0 "Intel PRO/1000CT (82547EI)" rev 0x00: irq
10, address 00:0c:f1:f5:13:3c
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 5
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 10
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 9
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci2 at ppb1 bus 2
ahc0 at pci2 dev 1 function 0 "Adaptec AHA-2940" rev 0x00: irq 11
scsibus0 at ahc0: 8 targets
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02:
24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6E040L0>
wd0: 16-sector PIO, LBA, 39205MB, 80293248 sectors
wd1 at pciide0 channel 0 drive 1: <HDS728080PLAT20>
wd1: 16-sector PIO, LBA48, 78533MB, 160836480 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
wd2 at pciide0 channel 1 drive 0: <IC35L060AVV207-0>
wd2: 16-sector PIO, LBA48, 58644MB, 120103200 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-M1302, 1006> SCSI0
5/cdrom removable
wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 10 for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq
3
iic0 at ichiic0
adt0 at iic0 addr 0x2e: emc6d100 rev 0x65
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem2 at iic0 addr 0x52: 256MB DDR SDRAM non-parity PC2700CL2.5
spdmem3 at iic0 addr 0x53: 1GB DDR SDRAM non-parity PC3200CL3.0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ff6d netmask ff6d ttymask ffef
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Sun Microsystems
Type 6 Keyboard" rev 1.00/1.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, layout 32
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhub5 at uhub1 port 1 "ALCOR Generic USB Hub" rev 1.10/3.12 addr 2
uaudio0 at uhub3 port 2 configuration 1 interface 0 "M Audio MobilePre"
rev 1.10/1.03 addr 2
uaudio0: audio rev 1.00, 9 mixer controls
audio0 at uaudio0
uhidev1 at uhub5 port 1 configuration 1 interface 0 "Sun Microsystems
Type 6 Mouse" rev 1.00/1.02 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
kqemu: kqemu version 0x00010300 loaded, max locked mem=1170828kB
DDB symbols added: 307712 bytes
Thanks
Edd
