As opposed to previous mention that the Ethernet interface is correctly identified on a 28 Jan -current snapshot:
http://marc.info/?l=openbsd-misc&m=120177549104133&w=2 ...the behaviour I'm seeing from the 25 Mar snapshot is similar to the following: http://marc.info/?l=openbsd-misc&m=120185685618399&w=2 http://marc.info/?l=openbsd-misc&m=119802047918588&w=2 Perhap different hardware revisions are being employed by ASUS. I'm using a EEE PC 4G Surf. My dmesg follows. Any suggestions or requests are welcomed. Jim ==========8<-------------------- OpenBSD 4.3-current (GENERIC) #723: Mon Mar 24 18:23:49 MDT 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Celeron(R) M processor 900MHz ("GenuineIntel" 686-class) 631 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF real mem = 2138140672 (2039MB) avail mem = 2059415552 (1964MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 01/04/08, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.5 @ 0xf06c0 (37 entries) bios0: vendor American Megatrends Inc. version "0703" date 01/04/2008 bios0: ASUSTeK Computer INC. 701 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf76b0/176 (9 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00) pcibios0: PCI bus #5 is the last bus bios0: ROM list: 0xc0000/0xf800! 0xcf800/0x1000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04 vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: aperture at 0xd0000000, size 0x10000000 "Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: irq 5 azalia0: codec[s]: Realtek/0x0662 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: irq 5 pci1 at ppb0 bus 4 ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04: irq 11 pci2 at ppb1 bus 3 "Attansic Technology L2" rev 0xa0 at pci2 dev 0 function 0 not configured ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04: irq 10 pci3 at ppb2 bus 1 uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: irq 7 uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: irq 3 uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: irq 10 uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: irq 5 ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4 pci4 at ppb3 bus 5 ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM disabled pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 1 drive 0: <SILICONMOTION SM223AC> wd0: 1-sector PIO, LBA, 3815MB, 7815024 sectors wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4 ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: irq 3 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM usb0 at uhci0: USB revision 1.0 uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci3: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 biomask e7fd netmask e7fd ttymask ffff mtrr: Pentium Pro MTRR support umass0 at uhub2 port 1 configuration 1 interface 0 "ENE UB6225" rev 2.00/1.00 addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets sd0 at scsibus0 targ 1 lun 0: <USB2.0, CardReader SD0, 0100> SCSI0 0/direct removable sd0: drive offline softraid0 at root root on wd0a swap on wd0b dump on wd0b WARNING: / was not properly unmounted uhub4 at uhub0 port 2 "Prolific Technology Inc. USB Embedded Hub" rev 2.00/1.00 addr 2 umass1 at uhub4 port 1 configuration 1 interface 0 "Prolific Technology Inc. USB Mass Storage Device" rev 2.00/1.00 addr 3 umass1: using ATAPI over Bulk-Only scsibus1 at umass1: 2 targets sd1 at scsibus1 targ 1 lun 0: <Corsair, Flash Voyager, 1.00> SCSI0 0/direct removable sd1: 978MB, 124 cyl, 255 head, 63 sec, 512 bytes/sec, 2002944 sec total sd1 detached scsibus1 detached umass1 detached uhub4 detached uhub4 at uhub0 port 2 "Prolific Technology Inc. USB Embedded Hub" rev 2.00/1.00 addr 2 umass1 at uhub4 port 1 configuration 1 interface 0 "Prolific Technology Inc. USB Mass Storage Device" rev 2.00/1.00 addr 3 umass1: using ATAPI over Bulk-Only scsibus1 at umass1: 2 targets sd1 at scsibus1 targ 1 lun 0: <Corsair, Flash Voyager, 1.00> SCSI0 0/direct removable sd1: 978MB, 124 cyl, 255 head, 63 sec, 512 bytes/sec, 2002944 sec total sd1 detached scsibus1 detached umass1 detached uhub4 detached uhub4 at uhub0 port 2 "Prolific Technology Inc. USB Embedded Hub" rev 2.00/1.00 addr 2 umass1 at uhub4 port 1 configuration 1 interface 0 "Prolific Technology Inc. USB Mass Storage Device " rev 2.00/1.00 addr 3 umass1: using ATAPI over Bulk-Only scsibus1 at umass1: 2 targets sd1 at scsibus1 targ 1 lun 0: <Corsair, Flash Voyager, 1.00> SCSI0 0/direct removable sd1: 978MB, 124 cyl, 255 head, 63 sec, 512 bytes/sec, 2002944 sec total
