I'm setting up an HP d530 desktop with 4.3-release.  With acpi enabled,
it crashes during boot (after install), with it disabled it seems to
work okay. Below is the dmesg/trace/ps when it crashes, below that is a successful boot with acpi disabled.

>> OpenBSD/i386 BOOT 3.01
boot>
booting hd0a:/bsd: 0x72a4d4
entry point at 0x200120
[ using 595232 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved. http://www.OpenBSD.org

OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
    [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem  = 527986688 (503MB)
avail mem = 502472704 (479MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/10/03, BIOS32 rev. 0 @ 0xeb4e0, SMBIOS
rev. 2.3 @ 0xf8dd4 (61 entries)
bios0: vendor Hewlett-Packard version "786B2 v1.11" date 07/10/2003
bios0: Hewlett-Packard HP d530 CMT(DR533S)
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT SSDT SSDT SSDT SSDT SSDT SSDT APIC SSDT ASF! SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices PCI0(S4) HUB_(S4) COM1(S4) COM2(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) EUSB(S3) PBTN(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0 [\DCHM] 0xd115f684 cnt:02 stk:00 field: bitpos=0da8 bitlen=0120 ref1:d1152c84 ref2:0 [Field] [\BIOS] 0xd1152c84 cnt:39 stk:00 opregion: 00,000ea440,fc0
wrong setbufint type 5

ffffc013 Called: \GDBF
  arg0:  0xd1141510 cnt:01 stk:00 objref: 0xd115f684 index:ffffffff
[\DCHM] 0xd115f684 cnt:02 stk:00 field: bitpos=0da8 bitlen=0120 ref1:d1152c84 ref2:0 [Field]
 [\BIOS] 0xd1152c84 cnt:39 stk:00 opregion: 00,000ea440,fc0
arg1: 0xd114153c cnt:01 stk:00 objref: 0xd115743c index:ffffffff 0xd115743c cnt:00 stk:61 integer: 0ffffc175 Called: \_SB_.PCI0._CRS
  local0:  0xd1157410 cnt:00 stk:60 integer: 6c
  local1:  0xd115743c cnt:00 stk:61 integer: 0
panic: aml_die aml_setbufint:988
Stopped at      Debugger+0x4:   leave
Debugger(d078aad0,d1160850,d092c568,8,160) at Debugger+0x4
panic(d077e9b5,d077ea94,3dc,d1157410,d1152c84) at panic+0x63
_aml_die(d077ea94,3dc,d077ea7b,5,d115f684,0,d092c5c8,d0447fcb) at _aml_die+0x46

aml_setbufint(d1167b90,0,20,d115f684) at aml_setbufint+0x38
aml_fieldio(d1167844,d11678c4,d1167b90,0,d1167844) at aml_fieldio+0x5f
aml_derefvalue(d1167844,d11678c4,0,d1167b50,d1167a10) at aml_derefvalue+0xcb
aml_evalterm(d1167844,d1167b50,d1167a10,d0673781,38) at aml_evalterm+0x20
aml_parseterm(d1167844,d1167a10,d092c728,d05cedd5,d1167844) at aml_parseterm+0x
37
aml_parseref(d1167844,a4,d11679d0,7d) at aml_parseref+0x27e
aml_parseop(d1167844,d11679d0,74) at aml_parseop+0xe6
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> trace
Debugger(d078aad0,d1160850,d092c568,8,160) at Debugger+0x4
panic(d077e9b5,d077ea94,3dc,d1157410,d1152c84) at panic+0x63
_aml_die(d077ea94,3dc,d077ea7b,5,d115f684,0,d092c5c8,d0447fcb) at _aml_die+0x46

aml_setbufint(d1167b90,0,20,d115f684) at aml_setbufint+0x38
aml_fieldio(d1167844,d11678c4,d1167b90,0,d1167844) at aml_fieldio+0x5f
aml_derefvalue(d1167844,d11678c4,0,d1167b50,d1167a10) at aml_derefvalue+0xcb
aml_evalterm(d1167844,d1167b50,d1167a10,d0673781,38) at aml_evalterm+0x20
aml_parseterm(d1167844,d1167a10,d092c728,d05cedd5,d1167844) at aml_parseterm+0x37
aml_parseref(d1167844,a4,d11679d0,7d) at aml_parseref+0x27e
aml_parseop(d1167844,d11679d0,74) at aml_parseop+0xe6
aml_parseterm(d1167844,d1141568,390,d05cedd5,d1167844) at aml_parseterm+0x2c
aml_callmethod(d1167844,d1141568,d115503f,d1160a44,d1167504) at aml_callmethod+0x26 aml_evalmethod(d1167504,d1160a44,2,d1141510,d1141568,d114153c,74,d1141510) at aml_evalmethod+0x41
aml_derefvalue(d1167504,d1160a84,1,101) at aml_derefvalue+0x8d
aml_derefvalue(d1167504,d1167810,0,d1167810,d1167790) at aml_derefvalue+0xf6
aml_evalterm(d1167504,d1167810,d1167790,d0673781,38) at aml_evalterm+0x20
aml_parseterm(d1167504,d1167790,d092c8e8) at aml_parseterm+0x37
aml_parseref(d1167504,70,d1167790,a9) at aml_parseref+0xeb
aml_parseop(d1167504,d1167790,74) at aml_parseop+0xe6
aml_parseterm(d1167504,d092ca10,390,30,d1167504) at aml_parseterm+0x2c
aml_callmethod(d1167504,d092ca10,d115521c,d1160844,d077fb42) at aml_callmethod+0x26
aml_evalmethod(0,d1160844,0,0,d092ca10) at aml_evalmethod+0x41
aml_evalnode(d1153e00,d1160844,0,0,d092ca10,d092ca10,64,d114cb50) at aml_evalnode+0xc7 acpiprt_getpcibus(d1167540,d115b1c4,d092cab8,d114cb60,0) at acpiprt_getpcibus+0x30 acpiprt_attach(d1153e00,d1167540,d092cb40,d1153e00,d1153e00) at acpiprt_attach+0x22
config_attach(d1153e00,d07852c8,d092cb40,d06713c4) at config_attach+0xfd
acpi_foundprt(d115b1c4,d1153e00,d0670bc8,d1153e00,0) at acpi_foundprt+0x95
aml_find_node(d115b2c4,d077e3b7,d0670bc8,d1153e00) at aml_find_node+0x6e
aml_find_node(d11529c4,d077e3b7,d0670bc8,d1153e00) at aml_find_node+0x5f
aml_find_node(d1152e84,d077e3b7,d0670bc8,d1153e00,d1152e84,d077e3b2,d0670b40,d1153e00) at aml_find_node+0x5f
acpi_attach(d1152f80,d1153e00,d092cd50,d1152f80,0) at acpi_attach+0x431
config_attach(d1152f80,d0785184,d092cd50,d0603378) at config_attach+0xfd
biosattach(d1152fc0,d1152f80,d092ce80,d1152fc0,d0202251) at biosattach+0x353
config_attach(d1152fc0,d07843e0,d092ce80,d04a4d80,d06d26f8) at config_attach+0xfd
mainbus_attach(0,d1152fc0,0,da1e5000,d092b334) at mainbus_attach+0x3d
config_attach(0,d0781d34,0,0,0) at config_attach+0xfd
config_rootfound(d06d0f6b,0,d092cf38,d0478826) at config_rootfound+0x27
cpu_configure(d0898ca0,1,3,0,2) at cpu_configure+0x29
main(0,0,0,0,0) at main+0x38a
ddb> ps
   PID   PPID   PGRP    UID  S       FLAGS  WAIT          COMMAND
*    0     -1      0      0  7     0x80200                swapper
ddb>





>> OpenBSD/i386 BOOT 3.01
boot> boot -c
booting hd0a:/bsd: +1004644 [52+306864+287943]=0x72a4d4
entry point at 0x200120
[ using 595232 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved. http://www.OpenBSD.org

OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
    [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem  = 527986688 (503MB)
avail mem = 502472704 (479MB)
User Kernel Config
UKC> disable acpi
417 acpi0 disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/10/03, BIOS32 rev. 0 @ 0xeb4e0, SMBIOS rev. 2.3 @ 0xf8dd4 (61 entries)
bios0: vendor Hewlett-Packard version "786B2 v1.11" date 07/10/2003
bios0: Hewlett-Packard HP d530 CMT(DR533S)
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.2 @ 0xeb4e0/0x4b20
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfe520/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xa600 0xca600/0x2000 0xe0c00/0x9a00!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02
agp0 at pchb0: aperture at 0xf0000000, size 0x8000000
vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 5
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci1 at ppb0 bus 5
bge0 at pci1 dev 2 function 0 "Broadcom BCM5782" rev 0x03, BCM5705 A3 (0x3003): irq 5, address 00:0e:7f:f7:31:4e
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02: 24-bit timer at 3579545Hz pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST340014A>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-ROM SC-148C, B100> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 5 for native-PCI interrupt
auich0 at pci0 dev 31 function 5 "Intel 82801EB/ER AC97" rev 0x02: irq 5, ICH5 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff65 netmask ff65 ttymask ffe7
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)" rev 1.10/3.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b

Reply via email to