I get the following on boot:
Automatic boot in progress: starting file system checks.
/dev/rwd0a: 1707 files, 16951 used, 283059 free (35 frags, 35378 blocks,
0.0% fragmentation)
/dev/rwd0a: MARKING FILE SYSTEM CLEAN
uvm_fault(0xd05e1aa0, 0x8000000, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at vget+0x1d: movl 0x3c(%esi),%edx
I suspect a hardware issue, but as it's on a rack on the other side of
the country, I can't easily tell. What else might be causing this ?
Thanks.
dmesg, trace & ps below:
[ using 493460 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,TM2,CNXT-ID
real mem = 1063755776 (1038824K)
avail mem = 963919872 (941328K)
using 4278 buffers containing 53288960 bytes (52040K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(12) BIOS, date 02/27/06, BIOS32 rev. 0 @ 0xfa000
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xcb24
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc9f0/288 (16 entries)
pcibios0: PCI Exclusive IRQs: 5 9 10 12
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0x9400! 0xcc000/0x4000! 0xd0000/0x1800
0xd2000/0x1800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7221 MCH Host" rev 0x05
ppb0 at pci0 dev 1 function 0 "Intel E7221 PCIE" rev 0x05
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82546GB)" rev 0x03: irq
9, address 00:04:23:cd:4f:12
em1 at pci2 dev 1 function 1 "Intel PRO/1000MT (82546GB)" rev 0x03: irq
12, address 00:04:23:cd:4f:13
"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
vga1 at pci0 dev 2 function 0 "Intel E7221 Video" rev 0x05: aperture at
0xd0400000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb2 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03
pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): irq 5, address 00:30:48:86:dc:60
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 28 function 3 "Intel 82801FB PCIE" rev 0x03
pci5 at ppb4 bus 5
bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): irq 10, address 00:30:48:86:dc:61
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x[ using 493460
bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,TM2,CNXT-ID
real mem = 1063755776 (1038824K)
avail mem = 963919872 (941328K)
using 4278 buffers containing 53288960 bytes (52040K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(12) BIOS, date 02/27/06, BIOS32 rev. 0 @ 0xfa000
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xcb24
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc9f0/288 (16 entries)
pcibios0: PCI Exclusive IRQs: 5 9 10 12
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0x9400! 0xcc000/0x4000! 0xd0000/0x1800
0xd2000/0x1800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7221 MCH Host" rev 0x05
ppb0 at pci0 dev 1 function 0 "Intel E7221 PCIE" rev 0x05
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82546GB)" rev 0x03: irq
9, address 00:04:23:cd:4f:12
em1 at pci2 dev 1 function 1 "Intel PRO/1000MT (82546GB)" rev 0x03: irq
12, address 00:04:23:cd:4f:13
"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
vga1 at pci0 dev 2 function 0 "Intel E7221 Video" rev 0x05: aperture at
0xd0400000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb2 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03
pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): irq 5, address 00:30:48:86:dc:60
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 28 function 3 "Intel 82801FB PCIE" rev 0x03
pci5 at ppb4 bus 5
bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): irq 10, address 00:30:48:86:dc:61
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 9
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 10
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd3
pci6 at ppb5 bus 6
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E-N, 1.AA> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801FR SATA" rev 0x03: DMA,
channel 0 wired to native-PCI, channel 1 wired to compatibility
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD800JD-75MSA2>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide1: couldn't map channel 1 cmd regs
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 10
iic0 at ichiic0
lm1 at iic0 addr 0x2f: W83782D rev D
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef65 netmask ff65 ttymask ffe7
pctr: user-level cycle counter enabled
umass0 at uhub4 port 1 configuration 1 interface 0
umass0: LaCie LaCie Hard Drive USB, rev 2.00/0.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <HDT72252, 5DLAT80, V44O> SCSI2 0/direct fixed
sd0: 238475MB, 238475 cyl, 64 head, 32 sec, 512 bytes/sec, 488397168 sec
total
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: sd0 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
Automatic boot in progress: starting file system checks.
/dev/rwd0a: 1707 files, 16951 used, 283059 free (35 frags, 35378 blocks,
0.0% fragmentation)
/dev/rwd0a: MARKING FILE SYSTEM CLEAN
uvm_fault(0xd05e1aa0, 0x8000000, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at vget+0x1d: movl 0x3c(%esi),%edx
ddb> trace
vget(8000000,12,d7ccb43c,ffffffff) at vget+0x1d
sched_sync(d7ccb43c) at sched_sync+0x60
Bad frame pointer: 0xd070bed8
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
8496 15145 3274 0 3 0x4006 physio fsck_ffs
15145 3274 3274 0 3 0x4086 wait fsck
3274 1 3274 0 3 0x4086 pause sh
17 0 0 0 3 0x100204 crypto_wa crypto
16 0 0 0 3 0x100204 aiodoned aiodoned
* 15 0 0 0 7 0x100204 update
14 0 0 0 3 0x100204 cleaner cleaner
13 0 0 0 3 0x100204 reaper reaper
12 0 0 0 3 0x100204 pgdaemon pagedaemon
11 0 0 0 3 0x100204 pftm pfpurge
10 0 0 0 3 0x100204 iicexec sensors
9 0 0 0 3 0x100204 usbevt usb4
8 0 0 0 3 0x100204 usbevt usb3
7 0 0 0 3 0x100204 usbevt usb2
6 0 0 0 3 0x100204 usbevt usb1
5 0 0 0 3 0x100204 usbtsk usbtask
4 0 0 0 3 0x100204 usbevt usb0
3 0 0 0 3 0x100204 apmev apm0
2 0 0 0 3 0x100204 kmalloc kmthread
1 0 1 0 3 0x4084 wait init
0 -1 0 0 3 0x80204 scheduler swapper
03: irq 9
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 10
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd3
pci6 at ppb5 bus 6
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E-N, 1.AA> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801FR SATA" rev 0x03: DMA,
channel 0 wired to native-PCI, channel 1 wired to compatibility
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD800JD-75MSA2>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide1: couldn't map channel 1 cmd regs
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 10
iic0 at ichiic0
lm1 at iic0 addr 0x2f: W83782D rev D
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef65 netmask ff65 ttymask ffe7
pctr: user-level cycle counter enabled
umass0 at uhub4 port 1 configuration 1 interface 0
umass0: LaCie LaCie Hard Drive USB, rev 2.00/0.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <HDT72252, 5DLAT80, V44O> SCSI2 0/direct fixed
sd0: 238475MB, 238475 cyl, 64 head, 32 sec, 512 bytes/sec, 488397168 sec
total
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: sd0 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
Automatic boot in progress: starting file system checks.
/dev/rwd0a: 1707 files, 16951 used, 283059 free (35 frags, 35378 blocks,
0.0% fragmentation)
/dev/rwd0a: MARKING FILE SYSTEM CLEAN
uvm_fault(0xd05e1aa0, 0x8000000, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at vget+0x1d: movl 0x3c(%esi),%edx
ddb> trace
vget(8000000,12,d7ccb43c,ffffffff) at vget+0x1d
sched_sync(d7ccb43c) at sched_sync+0x60
Bad frame pointer: 0xd070bed8
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
8496 15145 3274 0 3 0x4006 physio fsck_ffs
15145 3274 3274 0 3 0x4086 wait fsck
3274 1 3274 0 3 0x4086 pause sh
17 0 0 0 3 0x100204 crypto_wa crypto
16 0 0 0 3 0x100204 aiodoned aiodoned
* 15 0 0 0 7 0x100204 update
14 0 0 0 3 0x100204 cleaner cleaner
13 0 0 0 3 0x100204 reaper reaper
12 0 0 0 3 0x100204 pgdaemon pagedaemon
11 0 0 0 3 0x100204 pftm pfpurge
10 0 0 0 3 0x100204 iicexec sensors
9 0 0 0 3 0x100204 usbevt usb4
8 0 0 0 3 0x100204 usbevt usb3
7 0 0 0 3 0x100204 usbevt usb2
6 0 0 0 3 0x100204 usbevt usb1
5 0 0 0 3 0x100204 usbtsk usbtask
4 0 0 0 3 0x100204 usbevt usb0
3 0 0 0 3 0x100204 apmev apm0
2 0 0 0 3 0x100204 kmalloc kmthread
1 0 1 0 3 0x4084 wait init
0 -1 0 0 3 0x80204 scheduler swapper
--
Sincerely,
Kirk Ismay
System Administrator
--
Net Idea
201-625 Front Street Nelson, BC V1L 4B6
P:250-352-3512 | F:250-352-9780 | TF:1-888-352-3512
Check out our brand new website! www.netidea.com