Hello,
when I tried to send a mail today I get
gem0: device timeout
This happens on every try to send that special mail. Sending other
mails works well. I send mails from mutt with the msmtp port. The
machine is running the sparc64 snapshot from May 2nd (dmesg below).
Any hints what is going on here?
Regards,
Markus
console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.3-current (GENERIC) #1616: Fri May 2 06:31:00 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 1207959552 (1152MB)
avail mem = 1154973696 (1101MB)
mainbus0 at root: Sun Blade 100 (UltraSPARC-IIe)
cpu0 at mainbus0: SUNW,UltraSPARC-IIe (rev 1.4) @ 502 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64
b/l)
psycho0 at mainbus0: pci108e,a001, impl 0, version 0, ign 7c0
psycho0: bus range 0-1, PCI bus 0
psycho0: dvma map c0000000-dfffffff, iotdb 167a000-16fa000
pci0 at psycho0
ebus0 at pci0 dev 12 function 0 "Sun RIO EBus" rev 0x01
"flashprom" at ebus0 addr 0-fffff not configured
clock1 at ebus0 addr 0-1fff: mk48t59
ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"dma" at ebus1 addr 0-ffff ivec 0x2a not configured
power0 at ebus1 addr 800-82f ivec 0x20
com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo
com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo
gem0 at pci0 dev 12 function 1 "Sun ERI Ether" rev 0x01: ivec 0x7c6, address
00:03:ba:18:3a:e9
ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
0x0010dd, model 0x0002
"Sun FireWire" rev 0x01 at pci0 dev 12 function 2 not configured
ohci0 at pci0 dev 12 function 3 "Sun USB" rev 0x01: ivec 0x7e4, version 1.0,
legacy support
alipm0 at pci0 dev 3 function 0 "Acer Labs M7101 Power" rev 0x00: 223KHz clock
iic0 at alipm0
"max1617" at alipm0 addr 0x18 skipped due to alipm0 bugs
"scm001" at alipm0 addr 0x20 skipped due to alipm0 bugs
spdmem0 at iic0 addr 0x50: 512MB SDRAM ECC PC133CL2
spdmem1 at iic0 addr 0x51: 128MB SDRAM ECC PC133CL2
spdmem2 at iic0 addr 0x52: 256MB SDRAM ECC PC133CL3
spdmem3 at iic0 addr 0x53: 256MB SDRAM ECC PC133CL3
autri0 at pci0 dev 8 function 0 "Acer Labs M5451 Audio" rev 0x01: ivec 0x7e3
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at autri0
midi0 at autri0: <4DWAVE MIDI UART>
pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc3: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x7cc for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST3120213A>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITEON, CD-ROM LTN486S, Y3S2> ATAPI 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd1 at pciide0 channel 1 drive 0: <SAMSUNG SP0842N>
wd1: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ppb0 at pci0 dev 5 function 0 "Intel S21152BB PCI-PCI" rev 0x00
pci1 at ppb0 bus 1
vgafb0 at pci0 dev 19 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vgafb0: console (std, sun emulation)
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Sun OHCI root hub" rev 1.00/1.00 addr 1
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Sun Microsystems Type 6
Keyboard" rev 1.00/1.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, layout 33
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 0 "Logitech USB-PS/2 Optical
Mouse" rev 2.00/20.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir.
wsmouse0 at ums0
softraid0 at root
bootpath: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],0/[EMAIL PROTECTED],0
root on wd0a swap on wd0b dump on wd0b
