Hi All
I am new to OpenBSD and have two boxes with the same hardware running 4.2 as
the dmesg below. I have setup and tested carp on the re0, re1, and re2
network card but it does not work. I have watched the traffic with tcpdump
and do not see any of the 224.0.0.18 traffic from the second boxes. This
makes me think that the re driver or card has a problem with 224.0.0.18
traffic .e.g multicast traffic I was looking for some help on this and any
info or patch would be good. I have tried looking on the web but only fine
ref to NetBSD not OpenBSD. Sorry if this is the wrong place to sent this.
Carp works on the vr0 interface.
Thank you
Ben
# ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33208
groups: lo
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:30:18:a3:e2:97
groups: egress
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 192.168.1.252 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::230:18ff:fea3:e297%re0 prefixlen 64 scopeid 0x1
re1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:30:18:a3:e2:98
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 172.22.11.252 netmask 0xffffff00 broadcast 172.22.11.255
inet6 fe80::230:18ff:fea3:e298%re1 prefixlen 64 scopeid 0x2
re2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:30:18:a3:e2:99
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 172.22.12.252 netmask 0xffffff00 broadcast 172.22.12.255
inet6 fe80::230:18ff:fea3:e299%re2 prefixlen 64 scopeid 0x3
vr0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:30:18:a1:05:87
media: Ethernet autoselect (100baseTX full-duplex)
status: active
enc0: flags=0<> mtu 1536
carp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:00:5e:00:01:32
carp: MASTER carpdev re1 vhid 50 advbase 1 advskew 0
groups: carp
inet 172.22.11.1 netmask 0xffff0000 broadcast 255.255.255.0
inet6 fe80::200:5eff:fe00:132%carp1 prefixlen 64 scopeid 0x7
#
OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA C7-D Processor 1500MHz ("CentaurHauls" 686-class) 1.51 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FX
SR,SSE,SSE2,TM,SBF,SSE3,xTPR
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
real mem = 468152320 (446MB)
avail mem = 444497920 (423MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/30/07, BIOS32 rev. 0 @ 0xfa130,
SMBIOS rev. 2.3 @ 0xf0000 (34 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 11/30/2007
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xc964
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc890/208 (11 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 11 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8237 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00
agp0 at pchb0: v3, aperture at 0xe8000000, size 0x10000000
pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
re0 at pci0 dev 9 function 0 "Realtek 8169SC" rev 0x10: RTL8169/8110SCd
(0x1800), irq 11, address 00:30:18:a3:e2:97
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
"VIA VT6306 FireWire" rev 0x80 at pci0 dev 10 function 0 not configured
re1 at pci0 dev 11 function 0 "Realtek 8169SC" rev 0x10: RTL8169/8110SCd
(0x1800), irq 5, address 00:30:18:a3:e2:98
rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 2
re2 at pci0 dev 12 function 0 "Realtek 8169SC" rev 0x10: RTL8169/8110SCd
(0x1800), irq 10, address 00:30:18:a3:e2:99
rgephy2 at re2 phy 7: RTL8169S/8110S PHY, rev. 2
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <Hitachi HTS541680J9SA00>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide1: channel 0 disabled (no drives)
pciide1: channel 1 disabled (no drives)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 10
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 10
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-5300CL5
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 11
ac97: codec id 0x56494170 (VIA Technologies <70>)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: irq 10, address
00:30:18:a1:05:87
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI
0x004063, model 0x0032
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: probed fifo depth: 15 bytes
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pccom1: probed fifo depth: 15 bytes
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ff45 netmask ff65 ttymask ffe7
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
