Hi list, today i tried to read the esm log on a poweredge 2850 running OpenBSD 4.3 stable.
In the past i could see much more output from the internal sensors than only the raid sensor <snip> [EMAIL PROTECTED] root # sysctl hw.sensors hw.sensors.ami0.drive0=online (sd0), OK </snip> the dmesg says that impi is not configured. Is there a way to turn it on? Kind regards, Joerg dmesg: OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR real mem = 1073053696 (1023MB) avail mem = 1029550080 (981MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 10/03/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf9920 (87 entries) bios0: vendor Dell Computer Corporation version "A06" date 10/03/2006 bios0: Dell Computer Corporation PowerEdge 2850 acpi0 at bios0: rev 0 acpi0: tables DSDT FACP APIC SPCR HPET MCFG acpi0: wakeup devices PCI0(S5) PALO(S5) PBLO(S5) VPR0(S5) PBHI(S5) VPR1(S5) PICH(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PALO) acpiprt2 at acpi0: bus 2 (DOBA) acpiprt3 at acpi0: bus 3 (DOBB) acpiprt4 at acpi0: bus 4 (PBLO) acpiprt5 at acpi0: bus 5 (PBHI) acpiprt6 at acpi0: bus 6 (PXB1) acpiprt7 at acpi0: bus 7 (PXB2) acpiprt8 at acpi0: bus 8 (VPR1) acpiprt9 at acpi0: bus 9 (PXC1) acpiprt10 at acpi0: bus 11 (PXC2) acpiprt11 at acpi0: bus 14 (PICH) acpicpu0 at acpi0 bios0: ROM list: 0xc0000/0xb000! 0xcb000/0x2200 0xec000/0x4000! ipmi at mainbus0 not configured cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel E7520 Host" rev 0x09 ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x09 pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 "Intel IOP332 PCIE-PCIX" rev 0x06 pci2 at ppb1 bus 2 ami0 at pci2 dev 14 function 0 "Dell PERC 4e/Di" rev 0x06: irq 7 ami0: Dell 16d, 32b, FW 522D, BIOS vH430, 256MB RAM ami0: 2 channels, 0 FC loops, 1 logical drives scsibus0 at ami0: 40 targets sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed sd0: 139900MB, 17834 cyl, 255 head, 63 sec, 512 bytes/sec, 286515200 sec total scsibus1 at ami0: 16 targets safte0 at scsibus1 targ 6 lun 0: <PE/PV, 1x6 SCSI BP, 1.0> SCSI2 3/processor fixed scsibus2 at ami0: 16 targets ppb2 at pci1 dev 0 function 2 "Intel IOP332 PCIE-PCIX" rev 0x06 pci3 at ppb2 bus 3 ppb3 at pci0 dev 4 function 0 "Intel E7520 PCIE" rev 0x09 pci4 at ppb3 bus 4 ppb4 at pci0 dev 5 function 0 "Intel E7520 PCIE" rev 0x09 pci5 at ppb4 bus 5 ppb5 at pci5 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 pci6 at ppb5 bus 6 em0 at pci6 dev 7 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq 11, address 00:18:8b:30:f1:72 ppb6 at pci5 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09 pci7 at ppb6 bus 7 em1 at pci7 dev 8 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq 3, address 00:18:8b:30:f1:73 ppb7 at pci0 dev 6 function 0 "Intel E7520 PCIE" rev 0x09 pci8 at ppb7 bus 8 ppb8 at pci8 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 pci9 at ppb8 bus 9 ppb9 at pci9 dev 4 function 0 "Intel S21152BB PCI-PCI" rev 0x00 pci10 at ppb9 bus 10 ste0 at pci10 dev 4 function 0 "D-Link Systems 550TX" rev 0x15: irq 7, address 00:0d:88:68:30:f4 ukphy0 at ste0 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI 0x0090c3, model 0x0004 ste1 at pci10 dev 5 function 0 "D-Link Systems 550TX" rev 0x15: irq 10, address 00:0d:88:68:30:f5 ukphy1 at ste1 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI 0x0090c3, model 0x0004 ste2 at pci10 dev 6 function 0 "D-Link Systems 550TX" rev 0x15: irq 11, address 00:0d:88:68:30:f6 ukphy2 at ste2 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI 0x0090c3, model 0x0004 ste3 at pci10 dev 7 function 0 "D-Link Systems 550TX" rev 0x15: irq 3, address 00:0d:88:68:30:f7 ukphy3 at ste3 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI 0x0090c3, model 0x0004 ppb10 at pci8 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09 pci11 at ppb10 bus 11 ppb11 at pci11 dev 2 function 0 "Intel S21152BB PCI-PCI" rev 0x00 pci12 at ppb11 bus 12 ste4 at pci12 dev 4 function 0 "D-Link Systems 550TX" rev 0x15: irq 11, address 00:0d:88:68:31:00 ukphy4 at ste4 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI 0x0090c3, model 0x0004 ste5 at pci12 dev 5 function 0 "D-Link Systems 550TX" rev 0x15: irq 3, address 00:0d:88:68:31:01 ukphy5 at ste5 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI 0x0090c3, model 0x0004 ste6 at pci12 dev 6 function 0 "D-Link Systems 550TX" rev 0x15: irq 7, address 00:0d:88:68:31:02 ukphy6 at ste6 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI 0x0090c3, model 0x0004 ste7 at pci12 dev 7 function 0 "D-Link Systems 550TX" rev 0x15: irq 10, address 00:0d:88:68:31:03 ukphy7 at ste7 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI 0x0090c3, model 0x0004 ppb12 at pci11 dev 3 function 0 "Intel S21152BB PCI-PCI" rev 0x00 pci13 at ppb12 bus 13 ste8 at pci13 dev 4 function 0 "D-Link Systems 550TX" rev 0x15: irq 3, address 00:0d:88:68:31:08 ukphy8 at ste8 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI 0x0090c3, model 0x0004 ste9 at pci13 dev 5 function 0 "D-Link Systems 550TX" rev 0x15: irq 7, address 00:0d:88:68:31:09 ukphy9 at ste9 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI 0x0090c3, model 0x0004 ste10 at pci13 dev 6 function 0 "D-Link Systems 550TX" rev 0x15: irq 10, address 00:0d:88:68:31:0a ukphy10 at ste10 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI 0x0090c3, model 0x0004 ste11 at pci13 dev 7 function 0 "D-Link Systems 550TX" rev 0x15: irq 11, address 00:0d:88:68:31:0b ukphy11 at ste11 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI 0x0090c3, model 0x0004 uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11 uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 10 uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 7 ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 5 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2 pci14 at ppb13 bus 14 vga1 at pci14 dev 13 function 0 "ATI Radeon VE QY" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02 pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus3 at atapiscsi0: 2 targets cd0 at scsibus3 targ 0 lun 0: <TSSTcorp, CDRW/DVD TSL462D, DE01> SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask fde5 netmask fded ttymask ffef mtrr: Pentium Pro MTRR support uhub4 at uhub0 port 3 "Dell product 0xa001" rev 2.00/0.00 addr 2 uhidev0 at uhub4 port 1 configuration 1 interface 0 "DELL DELL USB Keyboard" rev 1.10/1.00 addr 3 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub4 port 1 configuration 1 interface 1 "DELL DELL USB Keyboard" rev 1.10/1.00 addr 3 uhidev1: iclass 3/0, 2 report ids uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0 uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0 softraid0 at root root on sd0a swap on sd0b dump on sd0b carp: carp0 demoted group carp to 129 carp: carp1 demoted group carp to 130 carp: carp2 demoted group carp to 131 carp: carp3 demoted group carp to 132 carp: carp4 demoted group carp to 133 carp: carp5 demoted group carp to 134 carp: carp0 demoted group carp to 133 carp: carp1 demoted group carp to 132 carp: carp3 demoted group carp to 131 carp: carp6 demoted group carp to 132 carp: carp4 demoted group carp to 131 carp: carp5 demoted group carp to 130 carp: carp6 demoted group carp to 129 carp: carp2 demoted group carp to 128 carp: carp2 demoted group egress to 0 carp: pfsync0 demoted group carp to 129 carp: pfsync0 demoted group pfsync to 1 carp: pfsync0 demoted group carp to 0 carp: pfsync0 demoted group pfsync to 0 wskbd1: disconnecting from wsdisplay0 wskbd1 detached ukbd0 detached uhidev0 detached uhid0 detached uhid1 detached uhidev1 detached -- Dipl.-Ing. (FH) Joerg Streckfuss, Phone: +49 40 808077-631 DFN-CERT Services GmbH, https://www.dfn-cert.de/, Phone +49 40 808077-555 Sitz / Register: Hamburg, AG Hamburg, HRB 88805, Ust-IdNr.: DE 232129737 SachsenstraCe 5, 20097 Hamburg/Germany, CEO: Dr. Klaus-Peter Kossakowski [demime 1.01d removed an attachment of type application/pkcs7-signature which had a name of smime.p7s]