Booting single processor generic is fine, bsd.mp panics on boot.
Jeff
(also filed with sendbug)
boot> bsd.mp
booting hd0a:bsd.mp: 6085700+1035580 [52+318368+300636]=0x761d24
entry point at 0x200120
[ using 619428 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.4-beta (GENERIC.MP) #804: Sun Jul 20 14:42:29 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
real mem = 2146983936 (2047MB)
avail mem = 2067787776 (1971MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/30/01, BIOS32 rev. 0 @ 0xfd85e,
SMBIOS rev. 2.3 @ 0xef530 (51 entries)
bios0: vendor Intel Corporation version "STL20.86B.0021.P01.0103301605"
date 03/30/2001
bios0: Intel STL2
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC BOOT
acpi0: wakeup devices SLPB(S4) COMA(S4) COMB(S4) LAN0(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0panic: cpu0: running cpu is at apic 3 instead of at
expected 0
Stopped at Debugger+0x4: leave
Debugger(0,4,d0816500,d2a39400,d0963b70) at Debugger+0x4
panic(d0787540,d2a39414,3,0,d07b47bc) at panic+0x55
cpu_attach(d2a6efc0,d2a39400,d0963b70,d2a6efc0,d08c82e0) at cpu_attach+0xd9
config_attach(d2a6efc0,d07adce4,d0963b70,d069aacc,d0963bfc) at
config_attach+0x
fd
acpimadt_attach(d2a6cc00,d2a91fc0,d0963c50,d2a6cc00,0) at
acpimadt_attach+0x446
config_attach(d2a6cc00,d07aec38,d0963c50,d06902b8,0) at config_attach+0xfd
acpi_attach(d2a6ef80,d2a6cc00,d0963d50,d2a6ef80,0) at acpi_attach+0x3dd
config_attach(d2a6ef80,d07aeaf4,d0963d50,d061c65c) at config_attach+0xfd
biosattach(d2a6efc0,d2a6ef80,d0963e80,d2a6efc0,d020323d) at biosattach+0x367
config_attach(d2a6efc0,d07adc9c,d0963e80,d04b5324,d06f3da8) at
config_attach+0x
fd
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb{0}> trace
Debugger(0,4,d0816500,d2a39400,d0963b70) at Debugger+0x4
panic(d0787540,d2a39414,3,0,d07b47bc) at panic+0x55
cpu_attach(d2a6efc0,d2a39400,d0963b70,d2a6efc0,d08c82e0) at cpu_attach+0xd9
config_attach(d2a6efc0,d07adce4,d0963b70,d069aacc,d0963bfc) at
config_attach+0x
fd
acpimadt_attach(d2a6cc00,d2a91fc0,d0963c50,d2a6cc00,0) at
acpimadt_attach+0x446
config_attach(d2a6cc00,d07aec38,d0963c50,d06902b8,0) at config_attach+0xfd
acpi_attach(d2a6ef80,d2a6cc00,d0963d50,d2a6ef80,0) at acpi_attach+0x3dd
config_attach(d2a6ef80,d07aeaf4,d0963d50,d061c65c) at config_attach+0xfd
biosattach(d2a6efc0,d2a6ef80,d0963e80,d2a6efc0,d020323d) at biosattach+0x367
config_attach(d2a6efc0,d07adc9c,d0963e80,d04b5324,d06f3da8) at
config_attach+0x
fd
mainbus_attach(0,d2a6efc0,0,deff4000,d0962334) at mainbus_attach+0x3d
config_attach(0,d07ab518,0,0,0) at config_attach+0xfd
config_rootfound(d06f25cb,0,d0963f38,d0486f12) at config_rootfound+0x27
cpu_configure(d08c7f80,1,3,0,2) at cpu_configure+0x29
main(0,0,0,0,0) at main+0x39f
ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
* 0 -1 0 0 7 0x80200 swapper
ddb{0}>
bsd dmesg
booting hd0a:/bsd: 6045664+1025204 [52+315248+297754]=0x7540c8
entry point at 0x200120
[ using 613428 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.4-beta (GENERIC) #980: Sun Jul 20 14:35:02 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
real mem = 2146983936 (2047MB)
avail mem = 2067836928 (1972MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/30/01, BIOS32 rev. 0 @ 0xfd85e,
SMBIOS rev. 2.3 @ 0xef530 (51 entries)
bios0: vendor Intel Corporation version "STL20.86B.0021.P01.0103301605"
date 03/30/2001
bios0: Intel STL2
apm at bios0 function 0x15 not configured
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC BOOT
acpi0: wakeup devices SLPB(S4) COMA(S4) COMB(S4) LAN0(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PCI1)
acpiec0 at acpi0
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature 110 degC
acpitz1 at acpi0: critical temperature 110 degC
acpitz2 at acpi0: critical temperature 80 degC
acpibtn0 at acpi0: SLPB
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1800 0xc9800/0x2800 0xcc000/0x5400
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x06
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x06
pci1 at pchb1 bus 1
ahc0 at pci1 dev 4 function 0 "Adaptec AIC-7899 U160" rev 0x01: irq 9
scsibus0 at ahc0: 16 targets, initiator 7
ahc1 at pci1 dev 4 function 1 "Adaptec AIC-7899 U160" rev 0x01: irq 5
scsibus1 at ahc1: 16 targets, initiator 7
vga1 at pci0 dev 2 function 0 "ATI Mach64 GV" rev 0x7a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci0 dev 3 function 0 "Intel 8255x" rev 0x08, i82559: irq 10,
address 00:d0:b7:b8:0a:d1
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
pciide0 at pci0 dev 6 function 0 "Promise PDC20269" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using irq 12 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST340016A>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
ahc2 at pci0 dev 7 function 0 "Adaptec AHA-29160 U160" rev 0x02: irq 9
scsibus2 at ahc2: 16 targets, initiator 7
sd0 at scsibus2 targ 0 lun 0: <SEAGATE, ST318405LC, 0105> SCSI3 0/direct
fixed
sd0: 17501MB, 19036 cyl, 4 head, 470 sec, 512 bytes/sec, 35843670 sec total
sd1 at scsibus2 targ 1 lun 0: <SEAGATE, ST318405LC, 0105> SCSI3 0/direct
fixed
sd1: 17501MB, 19036 cyl, 4 head, 470 sec, 512 bytes/sec, 35843670 sec total
sd2 at scsibus2 targ 2 lun 0: <SEAGATE, ST318405LC, 0105> SCSI3 0/direct
fixed
sd2: 17501MB, 19036 cyl, 4 head, 470 sec, 512 bytes/sec, 35843670 sec total
sd3 at scsibus2 targ 3 lun 0: <SEAGATE, ST318405LC, 0105> SCSI3 0/direct
fixed
sd3: 17501MB, 19036 cyl, 4 head, 470 sec, 512 bytes/sec, 35843670 sec total
sd4 at scsibus2 targ 4 lun 0: <SEAGATE, ST318405LC, 0105> SCSI3 0/direct
fixed
sd4: 17501MB, 19036 cyl, 4 head, 470 sec, 512 bytes/sec, 35843670 sec total
sd5 at scsibus2 targ 5 lun 0: <FUJITSU, MAP3735NC, 0108> SCSI3 0/direct
fixed
sd5: 70103MB, 47996 cyl, 4 head, 747 sec, 512 bytes/sec, 143571316 sec total
puc0 at pci0 dev 9 function 0 "US Robotics 3CP5610" rev 0x01: ports: 1 com
com3 at puc0 port 0 irq 11: ns16550a, 16 byte fifo
com3: probed fifo depth: 0 bytes
piixpm0 at pci0 dev 15 function 0 "ServerWorks OSB4" rev 0x50: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x52: 1GB SDRAM registered ECC PC133CL3
spdmem1 at iic0 addr 0x53: 1GB SDRAM registered ECC PC133CL3
pciide1 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
atapiscsi0 at pciide1 channel 0 drive 0
scsibus3 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus3 targ 0 lun 0: <MITSUMI, CD-ROM FX4830T!B, R02E> ATAPI
5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide1: couldn't map native-PCI interrupt
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask f365 netmask f765 ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
ahc2: target 0 using 16bit transfers
ahc2: target 0 synchronous at 80.0MHz DT, offset = 0x3f
ahc2: target 1 using 16bit transfers
ahc2: target 1 synchronous at 80.0MHz DT, offset = 0x3f
ahc2: target 2 using 16bit transfers
ahc2: target 2 synchronous at 80.0MHz DT, offset = 0x3f
ahc2: target 3 using 16bit transfers
ahc2: target 3 synchronous at 80.0MHz DT, offset = 0x3f
ahc2: target 4 using 16bit transfers
ahc2: target 4 synchronous at 80.0MHz DT, offset = 0x3f
ahc2: target 5 using 16bit transfers
ahc2: target 5 synchronous at 80.0MHz DT, offset = 0x7f
root on wd0a swap on wd0b dump on wd0b
Automatic boot in progress: starting file system checks.
/dev/rwd0a: file system is clean; not checking
/dev/rsd1a: file system is clean; not checking
/dev/rsd0a: file system is clean; not checking
/dev/rsd4a: file system is clean; not checking
/dev/rwd0h: file system is clean; not checking
/dev/rsd2a: file system is clean; not checking
/dev/rsd3d: file system is clean; not checking
/dev/rsd5a: file system is clean; not checking
/dev/rwd0n: file system is clean; not checking
/dev/rsd1b: file system is clean; not checking
/dev/rsd0d: file system is clean; not checking
/dev/rwd0i: file system is clean; not checking
/dev/rsd1d: file system is clean; not checking
/dev/rwd0d: file system is clean; not checking
/dev/rwd0e: file system is clean; not checking
/dev/rwd0g: file system is clean; not checking
/dev/rwd0f: file system is clean; not checking
/dev/rwd0j: file system is clean; not checking
/dev/rwd0k: file system is clean; not checking
/dev/rwd0l: file system is clean; not checking
/dev/rwd0m: file system is clean; not checking
setting tty flags
kbd: keyboard mapping set to us
kern.seminfo.semmni: 10 -> 512
kern.seminfo.semmns: 60 -> 4096
kern.shminfo.shmall: 8192 -> 65536
kern.shminfo.shmmax: 33554432 -> 536870912
starting network
[1] 9966
starting initial daemons: ntpd.
savecore: no core dump
checking quotas: done.
building ps databases: kvm dev.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: httpd ftpd inetd sshd.
starting local daemons:.
standard daemons: sensorsd cron.
Mon Jul 21 22:44:23 MDT 2008
starting wsmoused...
OpenBSD/i386 (cas_server.cas.local) (tty00)
login:
