Hi all, Do you know someone what does mean this error?
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf5cd0/192 (10 entries) cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4163B, A103> SCSI0 5/cdrom removable cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf5cd0/192 (10 entries) cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4163B, A103> SCSI0 5/cdrom removable cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2 cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28 cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28 cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28 cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28 cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28 cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28 cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28 cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28 cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28 cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28 cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28 cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28 Mechanic was running fine for 4 years.Reads very well all types of supported media. I tried wodim in Mandriva 2008.1 sometimes error,that I must use TAO,sometimes error That buffer overflow and some others.K3b have no info during process about Buffer, but in setup or in info is everything OK for HW,SW and privileges.Forgot dmesg, but it shows buffer right.Than i reboot to OpenBSD and tried cdio and cdrtools - nothing. Will it be sw problem or is mechanic dead?Can I use some of OpenBSD programs for check condition? Cdrtools shows mechanic,some info from it and from disc too.hdparm on Mandriva shows no problem. Thanks a lot TB