The G revision chips don't provide correct readings for some reason. It's interesting to note that only the last two K8 revisions, F and G, are documented by AMD to have temperature sensors, however, most G chips appear to report invalid data, whilst F chips and most undocumented pre-F chips are working just fine.
br, cnst.su. On 07/08/2008, Wade, Daniel <[EMAIL PROTECTED]> wrote: > The acpitz and lm readings look correct. But the kate isn't even close. > > hw.sensors.acpitz0.temp0=31.05 degC (zone temperature) > hw.sensors.kate0.temp0=-1.25 degC > hw.sensors.kate0.temp1=-8.00 degC > hw.sensors.kate0.temp2=0.25 degC > hw.sensors.kate0.temp3=7.50 degC > hw.sensors.lm1.temp0=35.00 degC > hw.sensors.lm1.temp1=31.50 degC > hw.sensors.lm1.temp2=41.00 degC > > OpenBSD 4.4 (GENERIC.MP) #1808: Wed Aug 6 00:19:35 MDT 2008 > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 2132963328 (2034MB) > avail mem = 2071121920 (1975MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0000 (41 entries) > bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 11/19/2007 > bios0: Unknow Unknow > acpi0 at bios0: rev 0 > acpi0: tables DSDT FACP SSDT HPET MCFG APIC > acpi0: wakeup devices HUB0(S5) XVR0(S5) XVR1(S5) XVR2(S5) XVR3(S5) UAR1(S5) > USB0(S3) USB2(S3) AZAD(S5) MMAC(S5) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 25000000 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+, 2612.48 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line > 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: apic clock running at 200MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+, 2612.04 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW > cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line > 16-way L2 cache > cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative > ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 11, 24 pins > ioapic0: misconfigured as apic 0, remapped to apid 2 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (HUB0) > acpicpu0 at acpi0: PSS > acpicpu1 at acpi0: PSS > acpitz0 at acpi0: critical temperature 90 degC > acpibtn0 at acpi0: PWRB > cpu0: PowerNow! K8 2612 MHz: speeds: 2600 2400 2200 2000 1800 1000 MHz > pci0 at mainbus0 bus 0: configuration mode 1 > "NVIDIA MCP65 Memory" rev 0xa1 at pci0 dev 0 function 0 not configured > pcib0 at pci0 dev 1 function 0 "NVIDIA MCP65 ISA" rev 0xa2 > nviic0 at pci0 dev 1 function 1 "NVIDIA MCP65 SMBus" rev 0xa1 > iic0 at nviic0 > iic0: addr 0x2e 00=c1 01=0f 02=00 03=00 04=00 05=00 06=00 07=c0 08=14 09=62 > 10=02 11=00 12=00 words 00=c1ff 01=0fff 02=00ff 03=00ff 04=00ff 05=00ff > 06=00ff 07=c0ff > iic0: addr 0x2f 00=00 01=0c 03=00 13=00 words 00=00ff 01=0cff 02=ffff 03=00ff > 04=ffff 05=ffff 06=ffff 07=ffff > spdmem0 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5 > spdmem1 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL5 > iic1 at nviic0 > "NVIDIA MCP65 Memory" rev 0xa1 at pci0 dev 1 function 2 not configured > ohci0 at pci0 dev 2 function 0 "NVIDIA MCP65 USB" rev 0xa1: apic 2 int 10 > (irq > 10), version 1.0, legacy support > ehci0 at pci0 dev 2 function 1 "NVIDIA MCP65 USB" rev 0xa1: apic 2 int 11 > (irq > 11) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1 > ppb0 at pci0 dev 8 function 0 "NVIDIA MCP65 PCI" rev 0xa1 > pci1 at ppb0 bus 1 > emu0 at pci1 dev 7 function 0 "Creative Labs SoundBlaster Audigy" rev 0x04: > apic 2 int 10 (irq 10) > ac97: codec id 0x83847609 (SigmaTel STAC9721/23) > ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D > audio0 at emu0 > "Creative Labs SoundBlaster Audigy Digital" rev 0x04 at pci1 dev 7 function 1 > not configured > "Creative Labs Firewire" rev 0x04 at pci1 dev 7 function 2 not configured > pciide0 at pci0 dev 9 function 0 "NVIDIA MCP65 IDE" rev 0xa1: DMA, channel 0 > configured to compatibility, channel 1 configured to compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets, initiator 7 > cd0 at scsibus0 targ 0 lun 0: <LITE-ON, DVDRW SHM-165P6S, MS0K> ATAPI 5/cdrom > removable > wd0 at pciide0 channel 0 drive 1: <ST380011A> > wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 > wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 > pciide0: channel 1 ignored (disabled) > pciide1 at pci0 dev 10 function 0 "NVIDIA MCP65 SATA" rev 0xa1: DMA > pciide1: using apic 2 int 11 (irq 11) for native-PCI interrupt > wd1 at pciide1 channel 0 drive 0: <ST3250824AS> > wd1: 16-sector PIO, LBA48, 238418MB, 488281250 sectors > wd2 at pciide1 channel 0 drive 1: <ST3500630AS> > wd2: 16-sector PIO, LBA48, 476940MB, 976773168 sectors > wd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 > wd2(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5 > ppb1 at pci0 dev 11 function 0 vendor "NVIDIA", unknown product 0x045b rev > 0xa1 > pci2 at ppb1 bus 2 > mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8056" rev 0x13, Yukon-2 EC > Ultra (0x3): apic 2 int 5 (irq 5) > msk0 at mskc0 port A: address 00:50:8d:9f:5b:64 > eephy0 at msk0 phy 0: Marvell 88E1149 Gigabit PHY, rev. 1 > ppb2 at pci0 dev 12 function 0 "NVIDIA MCP65 PCIE" rev 0xa1 > pci3 at ppb2 bus 3 > ppb3 at pci0 dev 13 function 0 "NVIDIA MCP65 PCIE" rev 0xa1 > pci4 at ppb3 bus 4 > vga1 at pci4 dev 0 function 0 "ATI Radeon X1950 Pro" rev 0x9a > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > drm at vga1 unsupported > "ATI Radeon X1950 Pro Sec" rev 0x9a at pci4 dev 0 function 1 not configured > ppb4 at pci0 dev 14 function 0 "NVIDIA MCP65 PCIE" rev 0xa1 > pci5 at ppb4 bus 5 > pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00 > pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00 > pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00 > kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev > BH-G1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23 > lm1 at wbsio0 port 0x290/8: W83627DHG > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1 > mtrr: Pentium Pro MTRR support > uhidev0 at uhub1 port 3 configuration 1 interface 0 "Logitech USB-PS/2 > Optical > Mouse" rev 2.00/11.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > softraid0 at root > root on wd0a swap on wd0b dump on wd0b
