Resending as the 1st attempt to send this with acpidump & pcidump output resulted in a 105kb sized email.
It seems the previous issues with re(4) reported on here have been semi fixed, however the system is acting strange, if I attempt to boot the system from GENERIC without disable ACPI, the system will stop after spkr0 at pcppi0, the keyboard is still responsive in that I can switch scroll, caps, num lock on & off but the system just sits there. Power cycling the box & attempting to boot GENERIC.MP kernel after the hang will cause a kernel panic with the previously reported panic: config_detach: forced detach of re0 failed (45) What I noticed is that though re(4) is detected, an error follows "no PHY found" & "reset never completed" The only way to get the system to boot GENERIC.MP is to switch the machine off, unplug battery & mains, wait & then use GENERIC.MP when you power up. The system also needs to have ACPI disabled to boot from install44.iso. As previously reported acpidump core dumps when run on this system aswell. Screenshot of trace, ps after kernel panic,& the core file from acpidump coredump + acpi & pcidump output can be found here: http://geeklan.co.uk/files/vostro1310/openbsd/august-12th/ OpenBSD 4.4 (GENERIC.MP) #1812: Tue Aug 12 17:22:53 MDT 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 2132897792 (2034MB) avail mem = 2071056384 (1975MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xdc010 (38 entries) bios0: vendor Dell Inc. version "A10" date 07/10/2008 bios0: Dell Inc. Vostro1310 acpi0 at bios0: rev 2 acpi0: tables DSDT FACP APIC HPET MCFG TCPA TMOR OSFR APIC BOOT SLIC SSDT SSDT SSDT SSDT acpi0: wakeup devices LID0(S3) HDEF(S3) PXSX(S3) PXSX(S5) USB1(S0) USB2(S0) USB3(S0) USB4(S0) USB5(S0) EHC1(S0) EHC2(S0) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU T5670 @ 1.80GHz, 1795.74 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR ,NXE,LONG cpu0: 2MB 64b/line 8-way L2 cache cpu0: apic clock running at 199MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU T5670 @ 1.80GHz, 1795.50 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR ,NXE,LONG cpu1: 2MB 64b/line 8-way L2 cache ioapic0 at mainbus0 apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 2, remapped to apid 1 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PEGP) acpiprt2 at acpi0: bus 2 (RP01) acpiprt3 at acpi0: bus 3 (RP02) acpiprt4 at acpi0: bus -1 (RP03) acpiprt5 at acpi0: bus 6 (RP04) acpiprt6 at acpi0: bus 7 (RP05) acpiprt7 at acpi0: bus -1 (RP06) acpiprt8 at acpi0: bus 8 (PCIB) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2 acpicpu1 at acpi0: C3, C2 acpibtn0 at acpi0: LID0 acpibtn1 at acpi0: PWRB acpibtn2 at acpi0: SLPB acpiac0 at acpi0: AC unit offline acpibat0 at acpi0: BAT1 serial 11 type Lion oem "Dell" acpivideo at acpi0 not configured acpivideo at acpi0 not configured cpu0: unknown Enhanced SpeedStep CPU, msr 0x0612092506000925 cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 1800 MHz (1292 mV): speeds: 1800, 1200 MHz pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c ppb0 at pci0 dev 1 function 0 "Intel GM965 PCIE" rev 0x0c: apic 1 int 16 (irq 5) pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0427 rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: no integrated graphics drm at vga1 unsupported uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 16 (irq 5) uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 21 (irq 11) ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 18 (irq 10) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: apic 1 int 22 (irq 10) azalia0: codec[s]: Realtek/0x0268 audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 1 int 17 (irq 11) pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: apic 1 int 16 (irq 5) pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x03: apic 1 int 19 (irq 11) pci4 at ppb3 bus 6 ppb4 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03: apic 1 int 17 (irq 11) pci5 at ppb4 bus 7 re0 at pci5 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C (0x3c00), apic 1 int 16 (irq 5), address 00:1c:23: rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 23 (irq 10) uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 19 (irq 11) uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 1 int 18 (irq 10) ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 23 (irq 10) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3 pci6 at ppb5 bus 8 "O2 Micro Firewire" rev 0x02 at pci6 dev 5 function 0 not configured sdhc0 at pci6 dev 5 function 2 "O2 Micro OZ711MP1 SDHC" rev 0x02: apic 1 int 22 (irq 10) sdmmc0 at sdhc0 "O2 Micro OZ711MP1 XDHC" rev 0x01 at pci6 dev 5 function 3 not configured pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03 pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets, initiator 7 cd0 at scsibus0 targ 0 lun 0: ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 1 int 18 (irq 10), AHCI 1.1 ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 scsibus1 at ahci0: 32 targets, initiator 32 sd0 at scsibus1 targ 0 lun 0: SCSI3 0/direct fixed sd0: 152627MB, 19457 cyl, 255 head, 63 sec, 512 bytes/sec, 312581808 sec total ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 1 int 18 (irq 10) iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: spkr0 at pcppi0 mtrr: Pentium Pro MTRR support rum0 at uhub1 port 5 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 2 rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:16:e6: uvideo0 at uhub3 port 1 configuration 1 interface 0 "SONiX Technology Inc Integrated Webcam" rev 2.00/83.04 addr 2 video0 at uvideo0 softraid0 at root root on sd0a swap on sd0b dump on sd0b OpenBSD 4.4 (GENERIC) #1562: Tue Aug 12 17:15:53 MDT 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 2133028864 (2034MB) avail mem = 2071183360 (1975MB) User Kernel Config UKC> disable acpi 292 acpi0 disabled UKC> exit Continuing... mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xdc010 (38 entries) bios0: vendor Dell Inc. version "A10" date 07/10/2008 bios0: Dell Inc. Vostro1310 acpi at bios0 not configured cpu0 at mainbus0: (uniprocessor) cpu0: Intel(R) Core(TM)2 Duo CPU T5670 @ 1.80GHz, 1795.76 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR ,NXE,LONG cpu0: 2MB 64b/line 8-way L2 cache cpu0: unknown Enhanced SpeedStep CPU, msr 0x06120a2d06000a2d cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 2000 MHz (1420 mV): speeds: 2000, 1200 MHz pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c ppb0 at pci0 dev 1 function 0 "Intel GM965 PCIE" rev 0x0c: irq 5 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0427 rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: no integrated graphics drm at vga1 unsupported uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: irq 5 uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: irq 11 ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: irq 10 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: irq 10 azalia0: codec[s]: Realtek/0x0268 audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: irq 11 pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: irq 5 pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x03: irq 11 pci4 at ppb3 bus 6 ppb4 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03: irq 11 pci5 at ppb4 bus 7 re0 at pci5 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C (0x3c00), irq 5, address 00:1c:23: rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: irq 10 uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: irq 11 uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: irq 10 ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: irq 10 ehci1: timed out waiting for BIOS usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3 pci6 at ppb5 bus 8 "O2 Micro Firewire" rev 0x02 at pci6 dev 5 function 0 not configured sdhc0 at pci6 dev 5 function 2 "O2 Micro OZ711MP1 SDHC" rev 0x02: irq 10 sdmmc0 at sdhc0 "O2 Micro OZ711MP1 XDHC" rev 0x01 at pci6 dev 5 function 3 not configured pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03 pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets, initiator 7 cd0 at scsibus0 targ 0 lun 0: ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: irq 10, AHCI 1.1 ahci0: PHY offline on port 1 ahci0: PHY offline on port 2 scsibus1 at ahci0: 32 targets, initiator 32 sd0 at scsibus1 targ 0 lun 0: SCSI3 0/direct fixed sd0: 152627MB, 19457 cyl, 255 head, 63 sec, 512 bytes/sec, 312581808 sec total ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: irq 10 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: spkr0 at pcppi0 mtrr: Pentium Pro MTRR support rum0 at uhub1 port 5 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 2 rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:16:e6: softraid0 at root root on sd0a swap on sd0b dump on sd0b _________________________________________________________________ Win New York holidays with Kelloggs & Live Search http://clk.atdmt.com/UKM/go/107571440/direct/01/
