/Markus
OpenBSD 4.4-current (GENERIC.MP) #29: Sun Sep 14 18:59:41 CEST 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 2125410304 (2026MB) avail mem = 2063753216 (1968MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf2a6d (25 entries) bios0: vendor Hewlett-Packard version "68DDU Ver. F.10" date 01/11/2008 bios0: Hewlett-Packard HP Compaq 6710b (GR679ET#AK8) acpi0 at bios0: rev 2acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices C0B0(S5) C108(S3) C10F(S3) C110(S3) C111(S3) C119(S3) C11A(S3) C11B(S3) C131(S5) C2A1(S5) C132(S5) C137(S5) C134(S5) C2A2(S5) C23D(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz, 1995.38 MHzcpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache cpu0: apic clock running at 199MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz, 1995.00 MHzcpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache ioapic0 at mainbus0 apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 acpiprt0 at acpi0: bus 2 (C0B0) acpiprt1 at acpi0: bus 8 (C11D) acpiprt2 at acpi0: bus 16 (C131) acpiprt3 at acpi0: bus 24 (C132) acpiprt4 at acpi0: bus 40 (C134) acpiprt5 at acpi0: bus 0 (C003) acpiec0 at acpi0 acpicpu0 at acpi0 acpicpu1 at acpi0 acpitz0 at acpi0: critical temperature 105 degC acpitz1 at acpi0: critical temperature 108 degC acpitz2 at acpi0: critical temperature 110 degC acpitz3 at acpi0: critical temperature 256 degC acpitz4 at acpi0: critical temperature 108 degCacpibat0 at acpi0: C23B model "Primary" serial 20667 2007/08/17 type LIon oem "Hewlett-Packard"
acpibat1 at acpi0: C23A not present acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: C2BF acpibtn1 at acpi0: C153 acpivideo at acpi0 not configured cpu0: unknown Enhanced SpeedStep CPU, msr 0x06120a2506000a25 cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 2000 MHz (1292 mV): speeds: 2000, 1200 MHz pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: aperture at 0xd0000000, size 0x10000000 "Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configureduhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 16 (irq 10) uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 17 (irq 10) ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 18 (irq 11)
usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: apic 1 int 16 (irq 10) azalia0: codec[s]: Analog Devices/0x1981, AT&T/Lucent/0x1040, using Analog Devices/0x1981
audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03 pci1 at ppb0 bus 8ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: apic 1 int 17 (irq 10)
pci2 at ppb1 bus 16wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 1 int 17 (irq 10), MoW2, address 00:1b:77:c7:4a:bc ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: apic 1 int 18 (irq 11)
pci3 at ppb2 bus 24bge0 at pci3 dev 0 function 0 "Broadcom BCM5787M" rev 0x02, BCM5754/5787 A2 (0xb002): apic 1 int 18 (irq 11), address 00:1a:4b:69:c0:69
brgphy0 at bge0 phy 1: BCM5787 10/100/1000baseT PHY, rev. 0ppb3 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03: apic 1 int 16 (irq 10)
pci4 at ppb3 bus 40uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 20 (irq 10) uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 21 (irq 10) uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 1 int 18 (irq 11) ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 20 (irq 10)
usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3 pci5 at ppb4 bus 2cbb0 at pci5 dev 4 function 0 "Ricoh 5C476 CardBus" rev 0xb6: apic 1 int 16 (irq 5)
"Ricoh 5C832 Firewire" rev 0x02 at pci5 dev 4 function 1 not configured cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20 pcmcia0 at cardslot0 pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets, initiator 7cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-T20N, WC05> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 pciide0: channel 1 ignored (disabled)ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 1 int 17 (irq 10), AHCI 1.1
scsibus1 at ahci0: 32 targets, initiator 32sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HTS54161, SBDO> SCSI3 0/direct fixed
sd0: 114473MB, 512 bytes/sec, 234441648 sec total usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 mtrr: Pentium Pro MTRR support "HP Bluetooth PC Card Mouse, " at pcmcia0 function 0 not configuredumass0 at uhub1 port 6 configuration 1 interface 0 "Prolific Technology Inc. Mass Storage Device" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0sd1 at scsibus2 targ 1 lun 0: <IC35L120, AVV207-1, V24O> SCSI0 0/direct fixed
sd1: 117800MB, 512 bytes/sec, 241254720 sec total ugen0 at uhub4 port 2 "AuthenTec Fingerprint Sensor" rev 1.10/6.23 addr 2 softraid0 at root root on sd0a swap on sd0b dump on sd0b Denis Doroshenko wrote:
Miod@ had a diff for that and i tried it, it fixes the warnings and heat control completely. now i hear fan changing rotation speed according to system load and temperature values in the different TZ seem to be held within appropriate range. As far as i can tell, Miod already submitted the diff to the -current. Check out, rebuild the kernel and try it :-) 2008/9/12 Rafal Brodewicz <[EMAIL PROTECTED]>:On Fri, Sep 12, 2008 at 11:51:40AM +0300, Denis Doroshenko wrote:in a hope this diff would fix overheating under ACPI on my compaq nc6000, built the kernel and found out that this diff changed acpitz warnings from: acpitz0: _AL1[0] not a object ref acpitz0: _AL2[0] not a object ref acpitz0: _AL3[0] not a object ref to acpitz0: _AL1[0.0] _PRO not a package acpitz0: _AL2[0.0] _PRO not a package acpitz0: _AL3[0.0] _PRO not a packageSame effect here. OpenBSD 4.4-current (GENERIC.MP) #29: Fri Sep 12 13:31:52 CEST 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 1051783168 (1003MB) avail mem = 1020948480 (973MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf2a9f (25 entries) bios0: vendor Hewlett-Packard version "68DDU Ver. F.12" date 05/22/2008 bios0: Hewlett-Packard HP Compaq 6510b (GB866EA#AKD) acpi0 at bios0: rev 2 acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices C0B0(S5) C108(S3) C10F(S3) C110(S3) C111(S3) C119(S3) C11A(S3) C11B(S3) C131(S5) C2A1(S5) C132(S0) C137(S0) C134(S5) C2A2(S5) C23D(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz, 1795.84 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG cpu0: 2MB 64b/line 8-way L2 cache cpu0: apic clock running at 199MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz, 1795.50 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG cpu1: 2MB 64b/line 8-way L2 cache ioapic0 at mainbus0 apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 acpiprt0 at acpi0: bus 2 (C0B0) acpiprt1 at acpi0: bus 8 (C11D) acpiprt2 at acpi0: bus 16 (C131) acpiprt3 at acpi0: bus 24 (C132) acpiprt4 at acpi0: bus 40 (C134) acpiprt5 at acpi0: bus 0 (C003) acpiec0 at acpi0 acpicpu0 at acpi0 acpicpu1 at acpi0 acpitz0 at acpi0: critical temperature 105 degC acpitz1 at acpi0: critical temperature 108 degC acpitz2 at acpi0: critical temperature 110 degC acpitz3 at acpi0: critical temperature 256 degC acpitz4 at acpi0: critical temperature 108 degC acpibat0 at acpi0: C23B model "Primary" serial 43469 2007/04/27 type LIon oem "Hewlett-Packard" acpibat1 at acpi0: C23A not present acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: C2BF acpibtn1 at acpi0: C153 acpivideo at acpi0 not configured cpu0: unknown Enhanced SpeedStep CPU, msr 0x0617092506000925 cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 1800 MHz (1292 mV): speeds: 1800, 1200 MHz pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: aperture at 0xd0000000, size 0x10000000 "Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 16 (irq 10) uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 17 (irq 10) ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 18 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: apic 1 int 16 (irq 10) azalia0: codec[s]: Analog Devices/0x1981, AT&T/Lucent/0x1040, using Analog Devices/0x1981 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03 pci1 at ppb0 bus 8 ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: apic 1 int 17 (irq 10) pci2 at ppb1 bus 16 wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 1 int 17 (irq 10), MoW2, address 00:1b:77:16:56:9a ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: apic 1 int 18 (irq 11) pci3 at ppb2 bus 24 bge0 at pci3 dev 0 function 0 "Broadcom BCM5787M" rev 0x02, BCM5754/5787 A2 (0xb002): apic 1 int 18 (irq 11), address 00:17:a4:e8:2a:06 brgphy0 at bge0 phy 1: BCM5787 10/100/1000baseT PHY, rev. 0 ppb3 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03: apic 1 int 16 (irq 10) pci4 at ppb3 bus 40 uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 20 (irq 10) uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 21 (irq 10) uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 1 int 18 (irq 11) ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 20 (irq 10) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3 pci5 at ppb4 bus 2 cbb0 at pci5 dev 4 function 0 "Ricoh 5C476 CardBus" rev 0xb6: apic 1 int 16 (irq 5) cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20 pcmcia0 at cardslot0 pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03 pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets, initiator 7 cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-T10N, PC05> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 pciide0: channel 1 ignored (disabled) ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 1 int 17 (irq 10), AHCI 1.1 scsibus1 at ahci0: 32 targets, initiator 32 sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HTS54161, SBDO> SCSI3 0/direct fixed sd0: 114473MB, 512 bytes/sec, 234441648 sec total usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 mtrr: Pentium Pro MTRR support softraid0 at root root on sd0a swap on sd0b dump on sd0b wpi0: radio is disabled by hardware switch wpi0: fatal firmware error wpi0: radio is disabled by hardware switch wpi0: fatal firmware error acpitz3: _AL4[0.0] _PRO not a package acpitz3: _AL4[0.0] _PRO not a package acpitz3: _AL4[0.0] _PRO not a package acpitz3: _AL4[0.0] _PRO not a package acpitz3: _AL4[0.0] _PRO not a package acpitz3: _AL4[0.0] _PRO not a package acpitz3: _AL4[0.0] _PRO not a package