Hi,
I've successfully installed -current on a ASUS EEEPC 1000H (via an usb
stick).
At the moment lii doesn't detect the wired lan adapter: "Attansic
Technology L1E" rev 0xb0 but maybe there will be a patch in the future...
For the LAN connection I've used an USB adapter: axe0 at uhub0 port 2
configuration 1 interface 0 "Cisco-Linksys USB200M v2"
If you have any question just contact me. I've tried to install some
packages but it seems that libiconv-1.12 is broken in the current snaphot :(
Best regards,
Sven
OpenBSD 4.4-current (GENERIC) #1050: Wed Sep 10 12:18:05 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
real mem = 1064529920 (1015MB)
avail mem = 1020891136 (973MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/01/08, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.5 @ 0xf0700 (30 entries)
bios0: vendor American Megatrends Inc. version "1005" date 08/01/2008
bios0: ASUSTeK Computer INC. 1000H
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf8720/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GBM LPC" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000
cpu0 at mainbus0
cpu0: unknown Enhanced SpeedStep CPU, msr 0x060f0c1f06000c1f
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1600 MHz (1196 mV): speeds: 1600, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xd0000000, size 0x10000000
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: irq 5
azalia0: codec[s]: Realtek/0x0269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: irq 5
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: irq 10
pci2 at ppb1 bus 3
"Attansic Technology L1E" rev 0xb0 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: irq 11
pci3 at ppb2 bus 1
ral0 at pci3 dev 0 function 0 "Ralink RT2790" rev 0x00: irq 11, address
00:22:xx:xx:xx:xx
ral0: MAC/BBP RT2872 (rev 0x0200), RF RT2720 (1T2R)
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: irq 3
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: irq 7
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: irq 5
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: irq 3
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST9160827AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask ebfd netmask ebfd ttymask ffff
mtrr: Pentium Pro MTRR support
axe0 at uhub0 port 2 configuration 1 interface 0 "Cisco-Linksys USB200M v2" rev
2.00/0.01 addr 2
axe0: AX88772, address 00:1d:xx:xx:xx:xx
ukphy0 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI
0x000ec6, model 0x0001
ugen0 at uhub4 port 1 "Broadcom Corp BT-253" rev 2.00/2.41 addr 2
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
