Hi, I got some errors trying to compile squid with ldap auth on openbsd 4.3.
I used squid from ports and compiled its source and I got same error when I add "--enable-auth="basic digest LDAP" \ and --enable-basic-auth-helpers="NCSA YP LDAP" \ to ./configure. Note I have already installed OpenLDAP . Can anyone help me please? Thanks Error is: Making all in helpers Making all in basic_auth Making all in LDAP if gcc -DHAVE_CONFIG_H -I. -I. -I../../../include -I../../../include -Wall -g -O2 -D_REENTRANT -MT squid_ldap_auth.o -MD -MP -MF ".deps/squid_ldap_auth.Tpo" -c -o squid_ldap_auth.o squid_ldap_auth.c; then mv -f ".deps/squid_ldap_auth.Tpo" ".deps/squid_ldap_auth.Po"; else rm -f ".deps/squid_ldap_auth.Tpo"; exit 1; fi squid_ldap_auth.c:123:18: lber.h: No such file or directory squid_ldap_auth.c:124:18: ldap.h: No such file or directory squid_ldap_auth.c:137: error: `LDAP_SCOPE_SUBTREE' undeclared here (not in a function) squid_ldap_auth.c:141: error: `LDAP_DEREF_NEVER' undeclared here (not in a function) squid_ldap_auth.c:147: error: `LDAP_NO_LIMIT' undeclared here (not in a function) squid_ldap_auth.c:154: error: syntax error before '*' token squid_ldap_auth.c:208: error: syntax error before '*' token squid_ldap_auth.c: In function `squid_ldap_errno': squid_ldap_auth.c:210: error: `ld' undeclared (first use in this function) squid_ldap_auth.c:210: error: (Each undeclared identifier is reported only once squid_ldap_auth.c:210: error: for each function it appears in.) squid_ldap_auth.c: At top level: squid_ldap_auth.c:213: error: syntax error before '*' token squid_ldap_auth.c: In function `squid_ldap_set_aliasderef': squid_ldap_auth.c:215: error: `ld' undeclared (first use in this function) squid_ldap_auth.c:215: error: `deref' undeclared (first use in this function) squid_ldap_auth.c: At top level: squid_ldap_auth.c:218: error: syntax error before '*' token squid_ldap_auth.c: In function `squid_ldap_set_referrals': squid_ldap_auth.c:220: error: `referrals' undeclared (first use in this function) squid_ldap_auth.c:221: error: `ld' undeclared (first use in this function) squid_ldap_auth.c:221: error: `LDAP_OPT_REFERRALS' undeclared (first use in this function) squid_ldap_auth.c: At top level: squid_ldap_auth.c:226: error: syntax error before '*' token squid_ldap_auth.c: In function `squid_ldap_set_timelimit': squid_ldap_auth.c:228: error: `ld' undeclared (first use in this function) squid_ldap_auth.c: At top level: squid_ldap_auth.c:231: error: syntax error before '*' token squid_ldap_auth.c:249: error: syntax error before '*' token squid_ldap_auth.c:251: warning: return type defaults to `int' squid_ldap_auth.c: In function `open_ldap_connection': squid_ldap_auth.c:252: error: `LDAP' undeclared (first use in this function) squid_ldap_auth.c:252: error: `ld' undeclared (first use in this function) squid_ldap_auth.c:278: warning: implicit declaration of function `ldap_init' squid_ldap_auth.c: In function `main': squid_ldap_auth.c:348: error: `LDAP' undeclared (first use in this function) squid_ldap_auth.c:348: error: `ld' undeclared (first use in this function) squid_ldap_auth.c:350: error: `LDAP_PORT' undeclared (first use in this function) squid_ldap_auth.c:410: error: `LDAP_SCOPE_BASE' undeclared (first use in this function) squid_ldap_auth.c:412: error: `LDAP_SCOPE_ONELEVEL' undeclared (first use in this function) squid_ldap_auth.c:414: error: `LDAP_SCOPE_SUBTREE' undeclared (first use in this function) squid_ldap_auth.c:438: error: `LDAP_DEREF_NEVER' undeclared (first use in this function) squid_ldap_auth.c:440: error: `LDAP_DEREF_ALWAYS' undeclared (first use in this function) squid_ldap_auth.c:442: error: `LDAP_DEREF_SEARCHING' undeclared (first use in this function) squid_ldap_auth.c:444: error: `LDAP_DEREF_FINDING' undeclared (first use in this function) squid_ldap_auth.c:587: error: `LDAP_INVALID_CREDENTIALS' undeclared (first use in this function) squid_ldap_auth.c:589: warning: implicit declaration of function `ldap_unbind' squid_ldap_auth.c:593: warning: implicit declaration of function `ldap_err2string' squid_ldap_auth.c:593: warning: format argument is not a pointer (arg 2) squid_ldap_auth.c:597: error: `LDAP_SUCCESS' undeclared (first use in this function) squid_ldap_auth.c: At top level: squid_ldap_auth.c:639: error: syntax error before '*' token squid_ldap_auth.c: In function `checkLDAP': squid_ldap_auth.c:643: error: `LDAP' undeclared (first use in this function) squid_ldap_auth.c:643: error: `bind_ld' undeclared (first use in this function) squid_ldap_auth.c:645: error: `password' undeclared (first use in this function) squid_ldap_auth.c:656: error: `LDAPMessage' undeclared (first use in this function) squid_ldap_auth.c:656: error: `res' undeclared (first use in this function) squid_ldap_auth.c:657: error: `entry' undeclared (first use in this function) squid_ldap_auth.c:662: error: `search_ld' undeclared (first use in this function) squid_ldap_auth.c:662: error: `persistent_ld' undeclared (first use in this function) squid_ldap_auth.c:665: error: `ldapServer' undeclared (first use in this function) squid_ldap_auth.c:665: error: `port' undeclared (first use in this function) squid_ldap_auth.c:667: error: `userid' undeclared (first use in this function) squid_ldap_auth.c:669: warning: implicit declaration of function `ldap_simple_bind_s' squid_ldap_auth.c:670: error: `LDAP_SUCCESS' undeclared (first use in this function) squid_ldap_auth.c:671: warning: format argument is not a pointer (arg 3) squid_ldap_auth.c:679: warning: implicit declaration of function `ldap_search_s' squid_ldap_auth.c:681: error: `LDAP_PARTIAL_RESULTS' undeclared (first use in this function) squid_ldap_auth.c:688: warning: format argument is not a pointer (arg 3) squid_ldap_auth.c:699: warning: implicit declaration of function `ldap_first_entry' squid_ldap_auth.c:706: warning: implicit declaration of function `ldap_get_dn' squid_ldap_auth.c:706: warning: assignment makes pointer from integer without a cast squid_ldap_auth.c:722: warning: implicit declaration of function `ldap_msgfree' squid_ldap_auth.c:742: warning: implicit declaration of function `ldap_compare_s' squid_ldap_auth.c:742: error: `LDAP_COMPARE_TRUE' undeclared (first use in this function) squid_ldap_auth.c: At top level: squid_ldap_auth.c:151: warning: `use_tls' defined but not used squid_ldap_auth.c:152: warning: `version' defined but not used *** Error code 1 My system: # dmesg OpenBSD 4.3 (CMT) #1: Mon Sep 22 15:25:18 BRT 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/CMT cpu0: Intel(R) Pentium(R) 4 CPU 2.13GHz ("GenuineIntel" 686-class) 2.13 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID ,CX16,xTPR real mem = 1072697344 (1023MB) avail mem = 1033314304 (985MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 06/16/05, BIOS32 rev. 0 @ 0xfd5b6, SMBIOS rev. 2.33 @ 0x3ff77000 (46 entries) bios0: vendor IBM version "-[KEE134AUS-1.34]-" date 06/16/2005 bios0: IBM CORPORATION -[84824RU]- bios0: ROM list: 0xc0000/0x9000 0xc9000/0x1000 0xca000/0x1000 0xcb000/0x9c00 0xd5000/0x2000 0xd7000/0x2000 0xd9000/0x800 0xd9800/0x800 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82875P Host" rev 0x02 ppb0 at pci0 dev 3 function 0 "Intel 82875P CSA" rev 0x02 pci1 at ppb0 bus 2 em0 at pci1 dev 1 function 0 "Intel PRO/1000CT (82547GI)" rev 0x00: irq 5, address 00:11:25:7f:86:28 ppb1 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02 pci2 at ppb1 bus 3 bge0 at pci2 dev 1 function 0 "Broadcom BCM5703 Alt" rev 0x10, BCM5703 B0 (0x1100): irq 11, address 00:10:18:16:14:1b brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 3 bge1 at pci2 dev 2 function 0 "Broadcom BCM5703 Alt" rev 0x10, BCM5703 B0 (0x1100): irq 11, address 00:10:18:16:0e:8a brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 3 ahd0 at pci2 dev 4 function 0 vendor "Adaptec", unknown product 0x808f rev 0x10: irq 11 ahd0: aic7901, U320 Wide Channel A, SCSI Id=7, PCI-X 50-66MHz, 512 SCBs scsibus0 at ahd0: 16 targets sd0 at scsibus0 targ 0 lun 0: <IBM-ESXS, VPR036W3-ETS10FN, S370> SCSI2 0/direct fixed sd0: 34715MB, 34401 cyl, 3 head, 688 sec, 512 bytes/sec, 71096640 sec total sd1 at scsibus0 targ 6 lun 0: <IBM-ESXS, VPR036W3-ETS10FN, S370> SCSI2 0/direct fixed sd1: 34715MB, 34401 cyl, 3 head, 688 sec, 512 bytes/sec, 71096640 sec total uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: irq 11 uhci1 at pci0 dev 29 function 1 "Intel 6300ESB USB" rev 0x02: irq 5 "Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured "Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: irq 11 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x0a pci3 at ppb2 bus 4 vga0 at pci3 dev 2 function 0 "ATI Radeon VE QY" rev 0x00 wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) xl0 at pci3 dev 7 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 5, address 00:0a:5e:63:7e:2e exphy0 at xl0 phy 24: 3Com internal media interface xl1 at pci3 dev 8 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 11, address 00:0a:5e:63:7d:72 exphy1 at xl1 phy 24: 3Com internal media interface ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02: 24-bit timer at 3579545Hz pciide0 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD-RAM GSA-H58N, 1.01> SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 "Intel 6300ESB SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using irq 5 for native-PCI interrupt ichiic0 at pci0 dev 31 function 3 "Intel 6300ESB SMBus" rev 0x02: irq 5 iic0 at ichiic0 admtm0 at iic0 addr 0x2d: 47m192 adt0 at iic0 addr 0x2e: adm1027 rev 0x6a spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM ECC PC3200CL3.0 spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM ECC PC3200CL3.0 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 midi0 at pcppi0: <PC speaker> lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask ff65 netmask ff65 ttymask ffe7 mtrr: Pentium Pro MTRR support softraid0 at root ahd0: target 0 synchronous with period = 0x8, offset = 0x7f(RDSTRM|DT|IU|RTI|QAS) ahd0: target 6 synchronous with period = 0x8, offset = 0x7f(RDSTRM|DT|IU|RTI|QAS) root on sd0a swap on sd0b dump on sd0b # My packages installed: # pkg_info apr-1.2.11p1 Apache Portable Runtime apr-util-1.2.10p0 companion library to APR autoconf-2.13p0 automatically configure source code on many Un*x platforms autoconf-2.57p0 automatically configure source code on many Un*x platforms autoconf-2.59p1 automatically configure source code on many Un*x platforms autoconf-2.61p1 automatically configure source code on many Un*x platforms cyrus-sasl-2.1.22p2 RFC 2222 SASL (Simple Authentication and Security Layer) db-4.6.21 Berkeley DB package, revision 4 gettext-0.16.1 GNU gettext gperf-3.0.1 perfect hash functions, to help write parsers help2man-1.29p0 GNU help2man libiconv-1.9.2p5 character set conversion library libltdl-1.5.22p3 GNU libtool system independent dlopen wrapper libtool-1.5.22p14 generic shared library support script metaauto-0.7 wrapper for gnu auto* openldap-client-2.3.39 Open source LDAP software (client) sarg-2.2.3.1p0 Squid Analysis Report Generator tcl-8.4.7p6 Tool Command Language wget-1.10.2p1 retrieve files from the web via HTTP, HTTPS and FTP #