I also told him to get a -current amd64 with >3.5GB. i've got a few things running on my amd64 at home w/ 4.1GB working set.
On Wed, Sep 24, 2008 at 10:38 AM, Otto Moerbeek <[EMAIL PROTECTED]> wrote: > On Wed, Sep 24, 2008 at 12:25:53PM -0500, Jason Sidabras wrote: > >> Thanks Ted and Chris, >> >> I have to go pick up some more RAM, i don't have a system I can take down to >> shift this over. > > That won't help. You are running into MAXDSIZE, which is not increased > by adding RAM. > > -Otto > >> >> Jason >> >> On Wed, Sep 24, 2008 at 12:17 PM, Jason Sidabras >> <[EMAIL PROTECTED]>wrote: >> >> > -----BEGIN PGP SIGNED MESSAGE----- >> > Hash: SHA1 >> > >> > Thanks Chris, >> > >> > I am a little worried about running `fsck -p` in case of loss of data >> > but I did it and edited my fstab. >> > >> > once booted I still have no luck running fsck_ffs: >> > >> > error is now: >> > >> > cannot alloc NNN bytes for statemap >> > dmesg follows: >> > >> > OpenBSD 4.3 (GENERIC.MP) #1582: Wed Mar 12 11:16:45 MDT 2008 >> > >> > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP >> > real mem = 2138632192 (2039MB) >> > avail mem = 2065088512 (1969MB) >> > mainbus0 at root >> > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (31 entries) >> > bios0: vendor Award Software International, Inc. version "F5" date >> > 03/25/2008 >> > bios0: Gigabyte Technology Co., Ltd. 945GCM-S2C >> > acpi0 at bios0: rev 0 >> > acpi0: tables DSDT FACP HPET MCFG APIC SSDT SSDT >> > acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) >> > PEX5(S5) HUB0(S5) UAR1(S1) USB0(S1) USB1(S1) USB2(S1) USB3(S1) >> > USBE(S1) AZAL(S5) PCI0(S5) >> > acpitimer0 at acpi0: 3579545 Hz, 24 bits >> > acpihpet0 at acpi0: 14318179 Hz >> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> > cpu0 at mainbus0: apid 0 (boot processor) >> > cpu0: Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz, 2533.64 MHz >> > cpu0: >> > >> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR,NXE,LONG >> > cpu0: 3MB 64b/line 8-way L2 cache >> > cpu0: apic clock running at 266MHz >> > cpu1 at mainbus0: apid 1 (application processor) >> > cpu1: Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz, 2533.33 MHz >> > cpu1: >> > >> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR,NXE,LONG >> > cpu1: 3MB 64b/line 8-way L2 cache >> > ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins >> > ioapic0: misconfigured as apic 0, remapped to apid 2 >> > acpiprt0 at acpi0: bus 0 (PCI0) >> > acpiprt1 at acpi0: bus 4 (PEX0) >> > acpiprt2 at acpi0: bus 5 (PEX1) >> > acpiprt3 at acpi0: bus -1 (PEX2) >> > acpiprt4 at acpi0: bus -1 (PEX3) >> > acpiprt5 at acpi0: bus -1 (PEX4) >> > acpiprt6 at acpi0: bus -1 (PEX5) >> > acpiprt7 at acpi0: bus 6 (HUB0) >> > acpicpu0 at acpi0: FVS, 2400, 1600 MHz >> > acpicpu1 at acpi0 >> > acpibtn0 at acpi0: PWRB >> > pci0 at mainbus0 bus 0: configuration mode 1 >> > pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02 >> > agp0 at pchb0: aperture at 0xc0000000, size 0x10000000 >> > ppb0 at pci0 dev 1 function 0 "Intel 82945G PCIE" rev 0x02: apic 2 int >> > 16 (irq 5) >> > pci1 at ppb0 bus 1 >> > ppb1 at pci1 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00 >> > pci2 at ppb1 bus 2 >> > arc0 at pci2 dev 14 function 0 "Areca ARC-1220" rev 0x00: apic 2 int 18 >> > (irq 10) >> > arc0: 8 ports, 256MB SDRAM, firmware V1.43 2007-4-17 >> > scsibus0 at arc0: 16 targets >> > sd0 at scsibus0 targ 0 lun 0: <Areca, ARC-1220-VOL#00, R001> SCSI3 >> > 0/direct fixed >> > sd0: 2861022MB, 44966 cyl, 511 head, 255 sec, 512 bytes/sec, >> > 5859374592 sec total >> > ppb2 at pci1 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00 >> > pci3 at ppb2 bus 3 >> > vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02 >> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >> > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: >> > apic 2 int 16 (irq 5) >> > azalia0: codec[s]: Realtek/0x0662 >> > audio0 at azalia0 >> > ppb3 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 >> > int 16 (irq 5) >> > pci4 at ppb3 bus 4 >> > ppb4 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 2 >> > int 17 (irq 12) >> > pci5 at ppb4 bus 5 >> > re0 at pci5 dev 0 function 0 "Realtek 8101E" rev 0x01: RTL8101E >> > (0x3400), apic 2 int 17 (irq 12), address 00:1f:d0:63:70:5f >> > rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1 >> > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 >> > int 23 (irq 3) >> > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 >> > int 19 (irq 11) >> > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 >> > int 18 (irq 10) >> > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 >> > int 16 (irq 5) >> > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 >> > int 23 (irq 3) >> > usb0 at ehci0: USB revision 2.0 >> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >> > ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1 >> > pci6 at ppb5 bus 6 >> > pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01 >> > pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, >> > channel 0 wired to compatibility, channel 1 wired to compatibility >> > wd0 at pciide0 channel 0 drive 0: <ST3250310NS> >> > wd0: 16-sector PIO, LBA48, 238474MB, 488395055 sectors >> > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 >> > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic >> > 2 int 19 (irq 11) >> > iic0 at ichiic0 >> > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM ECC PC2-5300CL5 >> > spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM ECC PC2-5300CL5 >> > usb1 at uhci0: USB revision 1.0 >> > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> > usb2 at uhci1: USB revision 1.0 >> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> > usb3 at uhci2: USB revision 1.0 >> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> > usb4 at uhci3: USB revision 1.0 >> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> > isa0 at pcib0 >> > isadma0 at isa0 >> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo >> > pckbc0 at isa0 port 0x60/5 >> > pckbd0 at pckbc0 (kbd slot) >> > pckbc0: using irq 1 for kbd slot >> > wskbd0 at pckbd0: console keyboard, using wsdisplay0 >> > pcppi0 at isa0 port 0x61 >> > midi0 at pcppi0: <PC speaker> >> > spkr0 at pcppi0 >> > lpt0 at isa0 port 0x378/4 irq 7 >> > it0 at isa0 port 0x290/8: IT8718F rev 0x05 >> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 >> > softraid0 at root >> > root on wd0a swap on wd0b dump on wd0b >> > >> > >> > >> > >> > -----BEGIN PGP SIGNATURE----- >> > Version: GnuPG v1.4.7 (MingW32) >> > Comment: http://getfiregpg.org >> > >> > iD8DBQFI2nYk2ZVbbZM1O8gRAqpvAJ9HgUSJq+uWZEqe51IHLMaoLqFHKwCeM40v >> > RdTNJ/Jpll/yvUlOjsyA0Aw= >> > =5OQ1 >> > -----END PGP SIGNATURE----- >> > On Wed, Sep 24, 2008 at 11:59 AM, Chris Kuethe <[EMAIL PROTECTED]>wrote: >> > >> >> well you can do this >> >> fsck -p >> >> mount -a >> >> TERM=vt220 vi /etc/fstab >> >> (comment out the raid) >> >> exit >> >> >> >> to at least get your system booted multiuser again. >> >> >> >> maybe boot a -current bsd.rd and fsck inside that? some improvements >> >> have been made to reduce fsck's memory usage.... >> >> >> >> On Wed, Sep 24, 2008 at 9:34 AM, Jason Sidabras >> >> <[EMAIL PROTECTED]> wrote: >> >> > -----BEGIN PGP SIGNED MESSAGE----- >> >> > Hash: SHA1 >> >> > >> >> > Hello, >> >> > >> >> > I just had a massive power failure and my raid drive is failing with a: >> >> > >> >> > cannot alloc NNN bytes for blockmap >> >> > cannot alloc NNN bytes for lncntp >> >> > >> >> > searching the archives and man pages for both OpenBSD and FreeBSD >> >> reveals: >> >> > >> >> > fsck_ffs(3) freebsd >> >> > "Fsck_ffs's request for memory for its virtual memory tables >> >> > failed. This should never happen. Fsck_ffs terminates on >> >> > this error condition. See a guru." >> >> > >> >> > So here I am. The raid drive is on a hardware raid areca 1220, in the >> >> > raid bios and volume check shows no errors so I am led to believe the >> >> > raid is still in tact. >> >> > >> >> > Booting OpenBSD 4.3 drops to single user and says to manually run >> >> > fsck_ffs. Doing so produces no different results, just the above error >> >> > messages. >> >> > >> >> > /etc/fstab (line of interest): >> >> > /dev/sd0a /pub_raid ffs rw,noexec,softdep 0 2 >> >> > >> >> > I can't seem to edit my fstab in single user mode because everything >> >> > is ro. System has 2GB of real memory and is running bsd.mp GENERIC. I >> >> > can get a dmesg but it will take me some time to get a serial >> >> > connected to this machine. >> >> > >> >> > Any answers besides reformat would be splended. I am booting into >> >> > single CPU bsd now to see if that makes a difference. >> >> > >> >> > Thanks in advance. >> >> > >> >> > Jason >> >> > Comment: http://getfiregpg.org >> >> > >> >> > iD8DBQFI2mv92ZVbbZM1O8gRAtNLAJ0Ssfns0r9fvbW8brXX2qF5hoVRYwCfTmNg >> >> > pksgAgF30Rx3MnNPK5XDwOQ= >> >> > =Hl35 >> >> > -----END PGP SIGNATURE----- >> >> > >> >> > >> >> >> >> >> >> >> >> -- >> >> GDB has a 'break' feature; why doesn't it have 'fix' too? > > -- GDB has a 'break' feature; why doesn't it have 'fix' too?