> Glad to see it's not just me.. I was actually thinking this might be a
> bug in the net80211 code, but you guys are also getting this with a
> 2860.
I have a similar ral in a 5501 and it's reliable. I don't recall needing
to touch it.
ral0 at pci0 dev 14 function 0 "Ralink RT2860" rev 0x00: irq 10, address
00:0c:f6:xx:xx:xx
ral0: MAC/BBP RT2860 (rev 0x0101), RF RT2820 (2T3R)
This is an old snapshot, nobody mentioned if this is a regression.
kern.version=OpenBSD 4.4-current (GENERIC) #1037: Mon Sep 1 13:47:20
MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
There are many 802.11 ifconfig incantations. It may be something (not)
in hostname.ralx.
!/sbin/ifconfig \$if mediaopt hostap mode 11g nwid ${_nwid} \
wpa wpapsk ${_wpakey} wpaciphers ccmp wpagroupcipher ccmp \
wpaprotos wpa2 wpaakms psk chan 13 up
ral0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu
1500
lladdr 00:0c:f6:xx:xx:xx
groups: wlan
media: IEEE802.11 autoselect mode 11g hostap
status: active
ieee80211: nwid OpenBSD chan 13 bssid 00:0c:f6:xx:xx:xx wpapsk
<not displayed> wpaprotos wpa2 wpaakms psk wpaciphers ccmp
wpagroupcipher ccmp 100dBm
OpenBSD 4.4-current (GENERIC) #1037: Mon Sep 1 13:47:20 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD"
586-class) 500 MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX
real mem = 536440832 (511MB)
avail mem = 510271488 (486MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 20/70/03, BIOS32 rev. 0 @ 0xfac40
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0xa800
cpu0 at mainbus0
amdmsr0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11,
address 00:00:24:ca:3d:98
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5,
address 00:00:24:ca:3d:99
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9,
address 00:00:24:ca:3d:9a
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12,
address 00:00:24:ca:3d:9b
ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
ral0 at pci0 dev 14 function 0 "Ralink RT2860" rev 0x00: irq 10, address
00:0c:f6:xx:xx:xx
ral0: MAC/BBP RT2860 (rev 0x0101), RF RT2820 (2T3R)
glxpcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03: rev 0,
32-bit 3579545Hz timer, watchdog, gpio
gpio0 at glxpcib0: 32 pins
pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA THNCF256MMA>
wd0: 1-sector PIO, LBA, 244MB, 500736 sectors
wd0(pciide0:0:0): using PIO mode 0
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 21 function 0 "AMD CS5536 USB" rev 0x02: irq 15,
version 1.0, legacy support
ehci0 at pci0 dev 21 function 1 "AMD CS5536 USB" rev 0x02: irq 15
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
isa0 at glxpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio1 at nsclpcsio0: 29 pins
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1
biomask e1c5 netmask ffe5 ttymask ffff
mtrr: K6-family MTRR support (2 registers)
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
