> > Hi > > > > I just try to install OpenBSD 4.4 on a serveur (HP DL120 > G5) to test the > > functionality of the raid (seens it works again .). > > > > I configure the first disk without any issue, and then try following > > commands: > > > > disklabel wd0 > disklabel.wd1 > > fdisk -i wd1 > > disklabel -R -r wd1 disklabel.wd1 > > newfs /dev/wd1a > > > > Error: > > newfs: /dev/wd1a: block device > > > > Same message when I try a mount. > > > > Not a problem I continue and made a new installation on wd1 > (with the CD) > > > > Then I build my raid0 configuration (by compiling the > kernel) and try to > > create the new disk: > > > > fdisk -i raid0 > > disklabel -E -raid0 > > newfs /dev/raid0a > > > > => same error by newfs and mount > > > > What do I wrong ? > > > > Regards > >
Thanks for all the answer. The answer should be > > disklabel wd0 > disklabel.wd1 > > fdisk -i wd1 > > disklabel -R -r wd1 disklabel.wd1 > > newfs /dev/rwd1a instead of newfs /dev/wd1a > > mount /dev/wd1a /mnt And > > fdisk -i raid0 > > disklabel -E -raid0 > > newfs /dev/rraid0a instead of newfs /dev/raid0a > > mount /dev/raid0a /mnt
