hi,
i've been running 4.4 release since the cd's arrived, and have
experienced 3 freezes/crashes since then. first time was when i
was enabling wpa2psk on the ral0 interface, second time when simply
running a vnc session, and the third directly after te reboot following
the second freeze.
symptoms : 2 times i had no response at all in any way. not through
network, not through console (keyboard didn't even respond). once,
it was still routing packets and responding to icmp, but the console
froze after logging in. in all cases there were no entries in any log
after rebooting.
4.3 ran fine, the ral0 card is a recent addition (and hence suspect).
any pointers on how to debug this ? i'm gonna runs memtest over the
weekend, and i might disable the ral-interface for a while, but that
probably won't get me much...
dmesg attached below...
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA Esther processor 1500MHz ("CentaurHauls" 686-class) 1.51 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,SSE3
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
real mem = 468152320 (446MB)
avail mem = 444112896 (423MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/15/06, BIOS32 rev. 0 @ 0xfa960, SMBIOS
rev. 2.3 @ 0xf0000 (33 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 09/15/2006
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xcce4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfcc20/192 (10 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 10 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 10 11 15
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8237 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xfc00 0xd0000/0x1000 0xd1000/0x1000 0xd2000/0x5000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00
pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: v3, aperture at 0xe8000000, size 0x10000000
drm at vga1 unsupported
ral0 at pci0 dev 8 function 0 "Ralink RT2860" rev 0x00: irq 15, address
00:0e:2e:ed:17:b2
ral0: MAC/BBP RT2860 (rev 0x0101), RF RT2820 (2T3R)
re0 at pci0 dev 9 function 0 "Realtek 8169SC" rev 0x10: RTL8169/8110SCd
(0x1800), irq 10, address 00:30:18:b0:26:ef
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
re1 at pci0 dev 11 function 0 "Realtek 8169SC" rev 0x10: RTL8169/8110SCd
(0x1800), irq 11, address 00:30:18:b0:26:f0
rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 2
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using irq 15 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HD103UJ>
wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide0 channel 1 drive 0: <SAMSUNG HD103UJ>
wd1: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-4200CL3
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 10
ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
audio0 at auvia0
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
fins0 at isa0 port 0x4e/2
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask f3fd netmask fffd ttymask ffff
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
--
CUL8R, Peter.
