I recently got an Edgeport/421 (4 USB, 2 RS-232 DB-9, 1 parallel) that seemed like it would be really handy since this computer is legacy free and doesn't have any serial ports and having serial ports would be really handy.
http://www.digi.com/products/usb/edgeport.jsp Everything seems to work great. Except the serial ports. Are there any suggestions on what I might need to do to make the serial ports work? >From looking and then taking it apart, it appears to be the newer TI version that is mostly just a TUSB5052 with one of the free ports hooked to a USB Parallel port. http://focus.ti.com/docs/prod/folders/print/tusb5052.html Is there already a USB serial driver that supports the TUSB5052 chip that I can just add the detection to? I am currently looking at uticom.c, but it claims: "XXX: multiport chips are not supported yet" More information if it helps. Snipped from a dmesg with UGEN_DEBUG set and ugendebug set to 10: <SNIP> uhub3 at uhub1 port 3 "Inside Out Networks product 0x028c" rev 1.10/1.51 addr 2 ulpt0 at uhub3 port 5 configuration 1 interface 0 "Inside Out Networks Edgeport/(4)21 Parallel" rev 1.00/1.00 addr 3 ulpt0: using bi-directional mode ugen0 at uhub3 port 6 "Inside Out Networks Edgeport/421" rev 1.10/0.01 addr 4 ugen_set_config: ugen0 to configno 1, sc=0xffff800000127000 ugen_set_config: ifaceno 0 ugen_set_config: endptno 0, endpt=0x81(1,128), sce=0xffff800000127468 ugen_set_config: endptno 1, endpt=0x01(1,0), sce=0xffff800000127310 ugen_set_config: endptno 2, endpt=0x82(2,128), sce=0xffff800000127718 ugen_set_config: endptno 3, endpt=0x02(2,0), sce=0xffff8000001275c0 ugen_set_config: endptno 4, endpt=0x87(7,128), sce=0xffff800000128488 Some of the output from usbdevs -vd: <SNIP> Controller /dev/usb1: <SNIP> port 3 addr 2: full speed, self powered, config 1, product 0x028c(0x028c), Inside Out Networks(0x1608), rev 1.51 uhub3 port 1 powered port 2 powered port 3 powered port 4 powered port 5 addr 3: full speed, power 98 mA, config 1, Edgeport/(4)21 Parallel(0x000b), Inside Out Networks(0x1608), rev 1.00 ulpt0 port 6 addr 4: full speed, self powered, config 1, Edgeport/421(0x020c), Inside Out Networks(0x1608), rev 0.01, iSerialNumber V50419195-0 ugen0 <SNIP> I did ask the Google, and marc.info, and although I did find the Linux and Sun drivers that Digi provides, I did not find anything that was useful to me. l8rZ, -- andrew - ICQ# 253198 - Jabber: [EMAIL PROTECTED] BOFH excuse of the day: the butane lighter causes the pincushioning