Hi misc@,
on recent kernel, my OpenBSD Bridge/Router seems to get panic when its
adjacent switch is rebooted. The switch is Cisco 3550-12T. I need to
change it's MTU which required the ciscoz reloaded. Cisco bridge protocol
is "spanning-tree mode rapid-pvst"
The OBSD machine it self is acting as BGP router, PF enabled, and bridge.
Any inputs would be appreciated.
panic: rtfree 2
Stopped at Debugger+0x4: leave
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> PID PPID PGRP UID S FLAGS WAIT COMMAND
29700 1 29700 0 3 0x4082 ttyin getty
9888 1 9888 0 3 0x4080 ttyin getty
17609 1 17609 0 3 0x40180 select sendmail
7221 1 1 0 3 0x4080 ttyopn getty
3370 1 3370 0 3 0x4082 ttyin getty
29197 1 29197 0 3 0x4082 ttyin getty
4362 1 4362 0 3 0x4082 ttyin getty
13554 1 13554 0 3 0x4082 ttyin getty
10632 1 10632 0 3 0x80 select cron
22677 1 22677 32767 3 0x180 nanosleep expiretable
18268 1 18268 0 3 0x80 select sshd
22611 1 22611 0 3 0x180 select inetd
31938 15025 15025 75 3 0x180 poll bgpd
12368 15025 15025 75 2 0x100 bgpd
*15025 1 15025 0 7 0 bgpd
8440 31901 31901 91 3 0x180 kqread snmpd
31901 1 31901 0 3 0x80 kqread snmpd
14442 29981 4836 83 3 0x180 poll ntpd
29981 4836 4836 83 3 0x180 poll ntpd
4836 1 4836 0 3 0x80 poll ntpd
12379 17834 17834 74 3 0x180 bpf pflogd
17834 1 17834 0 3 0x80 netio pflogd
26460 15000 15000 73 3 0x180 poll syslogd
15000 1 15000 0 3 0x88 netio syslogd
18 0 0 0 3 0x100200 bored crypto
17 0 0 0 3 0x100200 aiodoned aiodoned
16 0 0 0 3 0x100200 syncer update
15 0 0 0 3 0x100200 cleaner cleaner
14 0 0 0 3 0x100200 reaper reaper
13 0 0 0 3 0x100200 pgdaemon pagedaemon
12 0 0 0 3 0x100200 pftm pfpurge
11 0 0 0 3 0x100200 usbevt usb4
10 0 0 0 3 0x100200 usbevt usb3
9 0 0 0 3 0x100200 usbevt usb2
8 0 0 0 3 0x100200 usbevt usb1
7 0 0 0 3 0x100200 usbtsk usbtask
6 0 0 0 3 0x100200 usbevt usb0
5 0 0 0 3 0x100200 acpi_idle acpi0
4 0 0 0 3 0x100200 bored syswq
3 0 0 0 3 0x100200 idle0
2 0 0 0 3 0x100200 kmalloc kmthread
1 0 1 0 3 0x4080 wait init
0 -1 0 0 3 0x80200 scheduler swapper
ddb> Debugger(d25ce158,d1ac3300,4,ddb0a828,d25ce100) at Debugger+0x4
panic(d06eac16,d25ce178,d1ac3300,0,0) at panic+0x55
rtfree(ddb0a828,30,0,d1ac3300) at rtfree+0xbd
route_output(dde38d00,d77c2e18,0,dd211d50,d0202235) at route_output+0x341
raw_usrreq(d77c2e18,9,dde38d00,0,0) at raw_usrreq+0xf2
route_usrreq(d77c2e18,9,dde38d00,0,0) at route_usrreq+0xe8
sosend(d77c2e18,0,dd211ea8,dde38d00,0) at sosend+0x357
soo_write(d77be4d4,d77be4f0,dd211ea8,d7963000) at soo_write+0x1c
dofilewritev(d789c98c,6,d77be4d4,cfbfb680,4) at dofilewritev+0xeb
sys_writev(d789c98c,dd211f68,dd211f58,cfbfb680,d789c98c) at sys_writev+0x47
syscall() at syscall+0x24e
--- syscall (number 121) ---
0xd9703d1:
OpenBSD 4.4-current (GENERIC) #52: Thu Dec 18 22:46:20 WIT 2008
r...@border-lf.mygreenlinks.net:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error f<fixed_disk,invalid_time>
cpu0: Intel(R) Pentium(R) D CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR
real mem = 1069002752 (1019MB)
avail mem = 1025409024 (977MB)
RTC BIOS diagnostic error f<fixed_disk,invalid_time>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/13/07, SMBIOS rev. 2.4 @
0x3fbe4000 (42 entries)
bios0: vendor Intel Corporation version
"S3000.86B.02.00.0048.042920081306" date 04/29/2008
bios0: Intel S3000AH
acpi0 at bios0: rev 0
acpi0: tables DSDT SLIC FACP APIC WDDT MCFG ASF! SSDT SSDT SSDT SSDT SSDT
HEST BERT ERST EINJ
acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S1) PEX4(S4) PEX5(S4)
UHC1(S1) UHC2(S1) UHC3(S1) UHC4(S1) EHCI(S1) AC9M(S4) AZAL(
S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (P32_)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus -1 (PEX1)
acpiprt4 at acpi0: bus -1 (PEX2)
acpiprt5 at acpi0: bus -1 (PEX3)
acpiprt6 at acpi0: bus 2 (PEX4)
acpiprt7 at acpi0: bus 3 (PEX5)
acpicpu0 at acpi0: FVS, 3000, 2400 MHz
acpibtn0 at acpi0: SLPB
bios0: ROM list: 0xc0000/0x9000 0xc9000/0x1800
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7230 Host" rev 0x00
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: irq 9
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01: irq 9
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01: irq 11
pci3 at ppb2 bus 3
em0 at pci3 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: irq 9,
address 00:15:17:49:03:b3
"Intel 82573E Serial" rev 0x03 at pci3 dev 0 function 3 not configured
"Intel 82573E KCS" rev 0x03 at pci3 dev 0 function 4 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 11
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 11
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci4 at ppb3 bus 4
skc0 at pci4 dev 0 function 0 "D-Link Systems DGE-530T B1" rev 0x11, Yukon
Lite (0x9): irq 11
sk0 at skc0 port A: address 00:1b:11:10:07:f5
eephy0 at sk0 phy 0: 88E1011 Gigabit PHY, rev. 5
em1 at pci4 dev 1 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: irq
11, address 00:07:e9:0f:44:ac
vga1 at pci4 dev 4 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: irq 11
drm0 at radeondrm0
em2 at pci4 dev 5 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq 9,
address 00:15:17:49:03:b4
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configur
ed to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured
to native-PCI
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST380215AS>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 10
iic0 at ichiic0
adt0 at iic0 addr 0x2e: sch5027 rev 0x69
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
-- wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask fded netmask ffed ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
Thanks,
insandotpraja(at)gmaildotcom
