On Fri, Dec 19, 2008 at 12:40:38PM -0600, Aaron Martinez wrote:
> I am running 4.4 stable on i386 for the sole purpose of running nagios.
> So that I could get visualizations on the statusmap, nagios docs say that
> gd is required.
>
> I have performed just a minimal install, bsd, base44, etc44 and man44.
> When i try installing gd i come up with the following error:
> # pkg_add -nv gd
> parsing gd-2.0.35
> Dependencies for gd-2.0.35 resolve to: libiconv-1.12, jpeg-6bp3,
> png-1.2.28 (todo: jpeg-6bp3,png-1.2.28)
> gd-2.0.35:parsing jpeg-6bp3
> found libspec c.48.0 in /usr/lib
> Pretending to add gd-2.0.35:jpeg-6bp3
> gd-2.0.35:parsing png-1.2.28
> Pretending to add gd-2.0.35:png-1.2.28
> found libspec c.48.0 in /usr/lib
> found libspec expat.9.0 in /usr/lib
> Can't install gd-2.0.35: lib not found fontconfig.5.1
> Dependencies for gd-2.0.35 resolve to: libiconv-1.12, jpeg-6bp3,
> png-1.2.28 (todo: jpeg-6bp3,png-1.2.28)
> Full dependency tree is libiconv-1.12,jpeg-6bp3,png-1.2.28
> Can't install gd-2.0.35: lib not found freetype.16.1
> found libspec iconv.5.0 in package libiconv-1.12
> found libspec jpeg.62.0 in package jpeg-6bp3
> found libspec m.3.0 in /usr/lib
> found libspec png.7.0 in package png-1.2.28
> found libspec z.4.1 in /usr/lib
> /dev/wd0g: 1432 bytes
> /dev/wd0f: 1381968 bytes
>
>
> I did some searching on this and found it most recently referenced about
> Openbsd 3.9 where people were indicating that gd was not going to have the
> x dependency in future releases.
>
> I have another machine that i did my nagios testing on that does NOT have
> gd installed but the .gd2 icons are displayed correctly in the statusmap.
> I do have php5-gd installed and doing a test install of php5-gd-no_x11
> which works. My question here is, even though nagios doesn't use php, is
> the php-gd what is allowing the icons to display in this case since i
> don't actually have gd installed?
>
> Is there any other way to make this work? i didn't really want to install
> php or xbase on this box.
>
> Thanks in advance and dmesg below.
>
> Aaron Martinez
>
>
>
> OpenBSD 4.4-stable (GENERIC) #1: Fri Dec 5 15:52:41 CST 2008
> r...@obsdbuild.minn.example.com:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) 4 CPU 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
> real mem = 527986688 (503MB)
> avail mem = 502087680 (478MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 07/10/03, BIOS32 rev. 0 @ 0xeb4e0,
> SMBIOS rev. 2.3 @ 0xf8dd4 (57 entries)
> bios0: vendor Hewlett-Packard version "786B2 v1.11" date 07/10/2003
> bios0: Hewlett-Packard HP d530 SFF(DG781A)
> acpi0 at bios0: rev 0
> acpi0: tables DSDT FACP SSDT SSDT SSDT SSDT SSDT SSDT SSDT APIC SSDT ASF!
> SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT
> acpi0: wakeup devices PCI0(S4) HUB_(S4) COM1(S4) COM2(S4) USB1(S3)
> USB2(S3) USB3(S3) USB4(S3) EUSB(S3) PBTN(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 5 (HUB_)
> acpicpu0 at acpi0
> acpibtn0 at acpi0: PBTN
> bios0: ROM list: 0xc0000/0xa600 0xca600/0x2000 0xe0c00/0x9a00!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02
> vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> agp0 at vga1: aperture at 0xf0000000, size 0x8000000
> drm at vga1 unsupported
> uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
> uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 5
> uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 10
> ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 10
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
> pci1 at ppb0 bus 5
> bge0 at pci1 dev 2 function 0 "Broadcom BCM5782" rev 0x03, BCM5705 A3
> (0x3003): irq 5, address 00:0e:7f:f3:46:a7
> brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
> pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> wd0 at pciide0 channel 0 drive 0: <ST340014A>
> wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets, initiator 7
> cd0 at scsibus0 targ 0 lun 0: <LITEON, CD-ROM LTN486S, YQSM> ATAPI 5/cdrom
> removable
> cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
> pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide1: using irq 10 for native-PCI interrupt
> auich0 at pci0 dev 31 function 5 "Intel 82801EB/ER AC97" rev 0x02: irq 5,
> ICH5 AC97
> ac97: codec id 0x41445374 (Analog Devices AD1981B)
> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
> audio0 at auich0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask fde5 netmask fde5 ttymask ffff
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub2 port 1 configuration 1 interface 0 "ATEN UC-10KM
> V1.3.121" rev 1.10/1.00 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 3
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub2 port 1 configuration 1 interface 1 "ATEN UC-10KM
> V1.3.121" rev 1.10/1.00 addr 2
> uhidev1: iclass 3/1
> ums0 at uhidev1: 5 buttons, Z dir
> wsmouse0 at ums0 mux 0
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
Add the libraries from xbase.
