Hi,
I have the problem that, when dhclient is started for my wireless
interface iwi0 from /etc/netstart, no IPv4 default route is created. If
I call "dhclient iwi0" manually it works.
# cat /etc/hostname.bge0
rtsol
media autoselect \
priority 1 up
!/sbin/dhclient ``\$if''
For the wired connection it doesn't matter if I use dhcp or add the
!dhclient command, just trying out different things. Adding the default
route always works here.
# cat /etc/hostname.iwi0
rtsol
media autoselect nwid XXXXXXXX \
nwkey 0x00000000000000000000 \
bssid aa:bb:cc:dd:ee:ff:gg \
priority 2 up
!/sbin/ifconfig ``\$if'' chan >/dev/null 2>&1
!/sbin/dhclient ``\$if''
For iwi0 I need the first ! line so it actually starts the connection to
the access point. Without that line I do not get associated and nothing
happens at all.
When I add dhcp to the head of the file dhclient complains about no
link... and with the !dhclient line at the bottom I get an IP address
etc, just NO default route (even when I remove the hostname.bge0 file or
pull the cable). As said above, it works if I manually execute dhclient.
Any ideas?
Its is the GENERIC kernel with NTFS enabled:
OpenBSD 4.4-current (BELENUS) #0: Thu Dec 18 17:37:11 CET 2008
r...@obsd.home.lechtermann.net:/usr/src/sys/arch/i386/compile/BELENUS
cpu0: Intel(R) Pentium(R) M processor 1.60GHz ("GenuineIntel" 686-class)
1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 1600548864 (1526MB)
avail mem = 1538301952 (1467MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/14/06, BIOS32 rev. 0 @ 0xfd750,
SMBIOS rev. 2.33 @ 0xe0010 (59 entries)
bios0: vendor IBM version "74ET64WW (2.09 )" date 12/14/2006
bios0: IBM 2525FAG
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/240 (13 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xf600! 0xcf800/0x1600 0xd1000/0x1000
0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
cpu0: Enhanced SpeedStep 1600 MHz (1116 mV): speeds: 1600, 1500, 1400,
1300, 1200, 1100, 1000, 900, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: irq 11
drm0 at inteldrm0
"Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: irq 11
pci1 at ppb0 bus 2
bge0 at pci1 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1
(0x4101): irq 11, address 00:16:d3:29:ce:76
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 5
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 6
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci2 at ppb1 bus 4
cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: irq 11
sdhc0 at pci2 dev 0 function 1 "Ricoh 5C822 SD/MMC" rev 0x13: irq 5
sdmmc0 at sdhc0
iwi0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05: irq
11, address 00:16:6f:b2:30:c7
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 5 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 11,
ICH6 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TRANSCEND>
wd0: 1-sector PIO, LBA, 30592MB, 62652416 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd1 at pciide0 channel 1 drive 0: <ST9160821A>
wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 11
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask efe5 netmask efe5 ttymask ffff
mtrr: Pentium Pro MTRR support
wdc2 at pcmcia0 function 0 "TRANSCEND, TS32GCF133, " port 0xa000/16
wd2 at wdc2 channel 0 drive 0: <TRANSCEND>
wd2: 1-sector PIO, LBA, 30592MB, 62652416 sectors
wd2(wdc2:0:0): using BIOS timings
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd0: 245MB, 512 bytes/sec, 501760 sec total
uhub5 at uhub0 port 1 "IBM Hub" rev 2.00/0.01 addr 2
ugen0 at uhub3 port 2 "STMicroelectronics Biometric Coprocessor" rev
1.00/0.01 addr 2
softraid0 at root
softraid0: roaming device wd2f -> wd0f
root on wd0a swap on wd0b dump on wd0b
kqemu: kqemu version 0x00010300 loaded, max locked mem=781516kB
DDB symbols added: 332336 bytes
softraid0: roaming device wd2f -> wd0f
softraid0: roaming device wd2f -> wd0f
scsibus1 at softraid0: 1 targets, initiator 1
sd1 at scsibus1 targ 0 lun 0: <OPENBSD, SR CRYPTO, 003> SCSI2 0/direct fixed
sd1: 16384MB, 512 bytes/sec, 33554981 sec total
scsibus2 at softraid0: 1 targets, initiator 1
sd2 at scsibus2 targ 0 lun 0: <OPENBSD, SR CRYPTO, 003> SCSI2 0/direct fixed
sd2: 30591MB, 512 bytes/sec, 62651468 sec total
auich0: measured ac97 link rate at 47999 Hz, will use 48000 Hz
