Hi,
I've tried using the priority option with the default route (gets
assigned using dhcp) but it only works partially. Is that the intented
behaviour (as man ifconfig only speaks about static routes) or a bug?
# cat /etc/hostname.bge0
media autoselect priority 1 up
dhcp NONE NONE NONE
rtsol
# cat /etc/hostname.iwi0
nwid wrap bssid aa:bb:cc:dd:ee:ff
nwkey 0x00000000000000000000000000
media autoselect priority 2 up
!/sbin/ifconfig ``\$if'' chan >/dev/null 2>&1
dhcp NONE NONE NONE
rtsol
When the system is booted route shows the default route from iwi0...
which is only priority 2... shouldn't the default route be from bge0?
However, if I pull the cable from bge0 and plug it back in I get the
bge0 default route. Changing works here... but if I pull the cable
again, the default route isn't changed back to the one from iwi0.
Working as intended or bug?
Michael
Its is the GENERIC snapshot kernel from 2008/12/15 with NTFS enabled:
OpenBSD 4.4-current (BELENUS) #0: Thu Dec 18 17:37:11 CET 2008
r...@x41ibm:/usr/src/sys/arch/i386/compile/BELENUS
cpu0: Intel(R) Pentium(R) M processor 1.60GHz ("GenuineIntel" 686-class)
1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 1600548864 (1526MB)
avail mem = 1538301952 (1467MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/14/06, BIOS32 rev. 0 @ 0xfd750,
SMBIOS rev. 2.33 @ 0xe0010 (59 entries)
bios0: vendor IBM version "74ET64WW (2.09 )" date 12/14/2006
bios0: IBM 2525FAG
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/240 (13 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xf600! 0xcf800/0x1600 0xd1000/0x1000
0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
cpu0: Enhanced SpeedStep 1600 MHz (1116 mV): speeds: 1600, 1500, 1400,
1300, 1200, 1100, 1000, 900, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: irq 11
drm0 at inteldrm0
"Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: irq 11
pci1 at ppb0 bus 2
bge0 at pci1 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1
(0x4101): irq 11, address 00:16:d3:29:ce:76
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 5
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 6
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci2 at ppb1 bus 4
cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: irq 11
sdhc0 at pci2 dev 0 function 1 "Ricoh 5C822 SD/MMC" rev 0x13: irq 5
sdmmc0 at sdhc0
iwi0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05: irq
11, address 00:16:6f:b2:30:c7
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 5 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 11,
ICH6 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TRANSCEND>
wd0: 1-sector PIO, LBA, 30592MB, 62652416 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd1 at pciide0 channel 1 drive 0: <ST9160821A>
wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 11
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask efe5 netmask efe5 ttymask ffff
mtrr: Pentium Pro MTRR support
wdc2 at pcmcia0 function 0 "TRANSCEND, TS32GCF133, " port 0xa000/16
wd2 at wdc2 channel 0 drive 0: <TRANSCEND>
wd2: 1-sector PIO, LBA, 30592MB, 62652416 sectors
wd2(wdc2:0:0): using BIOS timings
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd0: 245MB, 512 bytes/sec, 501760 sec total
uhub5 at uhub0 port 1 "IBM Hub" rev 2.00/0.01 addr 2
ugen0 at uhub3 port 2 "STMicroelectronics Biometric Coprocessor" rev
1.00/0.01 addr 2
softraid0 at root
softraid0: roaming device wd2f -> wd0f
root on wd0a swap on wd0b dump on wd0b
kqemu: kqemu version 0x00010300 loaded, max locked mem=781516kB
DDB symbols added: 332336 bytes
softraid0: roaming device wd2f -> wd0f
softraid0: roaming device wd2f -> wd0f
scsibus1 at softraid0: 1 targets, initiator 1
sd1 at scsibus1 targ 0 lun 0: <OPENBSD, SR CRYPTO, 003> SCSI2 0/direct fixed
sd1: 16384MB, 512 bytes/sec, 33554981 sec total
scsibus2 at softraid0: 1 targets, initiator 1
sd2 at scsibus2 targ 0 lun 0: <OPENBSD, SR CRYPTO, 003> SCSI2 0/direct fixed
sd2: 30591MB, 512 bytes/sec, 62651468 sec total
auich0: measured ac97 link rate at 47999 Hz, will use 48000 Hz
