Hi
This is the first problem I've had with OpenBSD, I think I've attached all
relevant information but if i've neglected anything please let me know.
I'm getting the following panic at boot time with the latest snapshot dated
1/9/09
uvm_fault(0xd08084a0, 0x12e3e000, 0, 3) -> e
kernel: page fault trap, code=0
Stopped at apic_vectorset+0x50: movl %esi,apic_maxlevel(,%eax,4)
apic_vectorset(d128fb00,0,ff,0,0) at apic_vectorset+0x50
ioapic_enable(d08084a0,0,d0961fa0,d034bc99,d08bd540) at ioapic_enable+0x8f
cpu_configure(d08bd540,1,3,0,2) at cpu_configure+0x42
main(0,0,0,0,0) at main+0x399
ddb> trace
apic_vectorset(d128fb00,0,ff,0,0) at apic_vectorset+0x50
ioapic_enable(d08084a0,0,d0961fa0,d034bc99,d08bd540) at ioapic_enable+0x8f
cpu_configure(d08bd540,1,3,0,2) at cpu_configure+0x42
main(0,0,0,0,0) at main+0x399
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
* 0 -1 0 0 7 0x80200 swapper
ddb> show registers
ds 0x10
es 0x10
fs 0x58
gs 0
edi 0xff
esi 0
ebp 0xd0961ef8 end+0xa1e54
ebx 0xd12a8800 end+0x9e875c
edx 0xd12a8800 end+0x9e875c
ecx 0xd128fb00 end+0x9cfa5c
eax 0xd0960334 end+0xa0290
eip 0xd06256fc apic_vectorset+0x50
cs 0x8
eflags 0x10246
esp 0xd0961ed0 end+0xa1e2c
ss 0xd0960010 end+0x9ff6c
apic_vectorset+0x50: movl %esi,apic_maxlevel(,%eax,4)
ddb>
Here's the dmesg leading up to the panic
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2009 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.4-current (GENERIC) #1647: Thu Jan 8 15:25:01 MST 2009
t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
real mem = 535834624 (511MB)
avail mem = 509853696 (486MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/16/05, BIOS32 rev. 0 @ 0xfd5b6,
SMBIOS rev. 2.33 @ 0x1ff77000 (46 entries)
bios0: vendor IBM version "-[KEE134AUS-1.34]-" date 06/16/2005
bios0: IBM CORPORATION -[8482ENY]-
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC BOOT ASF!
acpi0: wakeup devices CSA_(S4) PCIX(S4) PCIB(S4) COM1(S4) COM2(S4) KBC0(S4)
MSE0(S4) USB1(S1) USB2(S1) EUSB(S1)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 202MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 2 pa 0xfec10000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (CSA_)
acpiprt2 at acpi0: bus 3 (PCIX)
acpiprt3 at acpi0: bus 4 (PCIB)
acpicpu0 at acpi0: C3
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0x9000 0xc9000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82875P Host" rev 0x02
ppb0 at pci0 dev 3 function 0 "Intel 82875P CSA" rev 0x02
pci1 at ppb0 bus 2
em0 at pci1 dev 1 function 0 "Intel PRO/1000CT (82547GI)" rev 0x00: apic 1
int 18 (irq 5), address 00:11:25:ab:fc:41
ppb1 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci2 at ppb1 bus 3
uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: apic 1 int 16
(irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 6300ESB USB" rev 0x02: apic 1 int 19
(irq 5)
"Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured
"Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured
ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: apic 1 int 23
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x0a
pci3 at ppb2 bus 4
vga1 at pci3 dev 2 function 0 "ATI Radeon VE" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 1 int 16 (irq 11)
drm0 at radeondrm0
ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 6300ESB SATA" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <LITE-ON, CD-ROM LTN-489S, 8US5> ATAPI 5/cdrom
removable
atapiscsi1 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi1: 2 targets, initiator 7
cd1 at scsibus1 targ 0 lun 0: <PHILIPS, DVDR1640P, P2.0> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd0 at pciide0 channel 1 drive 0: <HDS728080PLA380 39M3701 26K5308IBM>
wd0: 16-sector PIO, LBA48, 76324MB, 156312576 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 6300ESB SMBus" rev 0x02: apic 1 int
17 (irq 5)
iic0 at ichiic0
admtm0 at iic0 addr 0x2d: 47m192
adt0 at iic0 addr 0x2e: adm1027 rev 0x6a
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM ECC PC3200CL3.0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
uvm_fault(0xd08084a0, 0x12e3e000, 0, 3) -> e
kernel: page fault trap, code=0
Stopped at apic_vectorset+0x50: movl %esi,apic_maxlevel(,%eax,4)
apic_vectorset(d128fb00,0,ff,0,0) at apic_vectorset+0x50
ioapic_enable(d08084a0,0,d0961fa0,d034bc99,d08bd540) at ioapic_enable+0x8f
cpu_configure(d08bd540,1,3,0,2) at cpu_configure+0x42
main(0,0,0,0,0) at main+0x399
Thank you
Barry
