hello, i'll try to extract the dmesg out that machine.
tonight i want to try also the amd64 install image, and i want to make dmesg dump for both i386 and amd64. thank you for answering, bogdan --- On Mon, 1/26/09, Jasper Lievisse Adriaanse <jas...@humppa.nl> wrote: > From: Jasper Lievisse Adriaanse <jas...@humppa.nl> > Subject: Re: Fujitsu-siemens machine freezes > To: "BOG BOG" <bo...@yahoo.com> > Date: Monday, January 26, 2009, 4:38 AM > On Sun, Jan 25, 2009 at 11:51:19PM -0800, BOG BOG wrote: > > Hello, > > > > In this weekend i bought a fujitsu-siemens machine, > with the following > > configuration: > > Pentium Core duo Intel E2200, 2.20 Ghz > > FSB 800 Mhz > > 3 Gb ram: > > 2 GB (1 module(s) with 2 GB, DDR2), 800 MHz > > 1 GB (1 module(s) with 1 GB, DDR2), 800 MHz > > > > Hdd 500 Gb, Serial ATA II > > > > The following is copy/paste from the data sheet(found > here: > > > http://sp.fujitsu-siemens.com/dmsp/docs/ds-esprimo-p3510.pdf) > > > > Mainboard type D2750 > > Formfactor 5BTX > > Chipset Intel. G31 > > Processor socket LGA 775 > > Processor quantity maximum 1 > > System bus (FSB / HT / QPI) up to 1333 MHz > > Memory slots 2 DIMM (DDR2) > > Supported capacity RAM (max.) 8 GB > > Memory frequency 800 MHz > > Memory notes With future modules. > > Dual channel support. > > For dual channel > performance, 2 memory > > modules have to be > ordered. Capacity per > > channel has to be the > same. > > LAN 10/100/1000 MBit/s > Realtek RTL8111C > > BIOS version Phoenix 6.0 > > BIOS features BIOS Flash EPROM update > by software > > Recovery BIOS > > Audio codec Realtek ALC262 > > Audio features High Definition audio > > > > > > The problem is that after the process of creating the > partitions, and copying > > the base modules, the machine freezes. > > > > I do not install xserver modules, as I want it to be a > server, an right after > > the game44.tgz module is copied on the hard drive, the > system freezes. > > > > I tried to exclude game44.tgz, in a new installation > process, and after > > man44.tgz, the system freezes. > > > > I really do not understand the problem, because the > hard drive as well as cd > > drive are detected and properly initialized. > > > > Unfortunately, I do not have the dmesg > > > > I do not want to put other os on this machine, because > i like OpenBSD. > > > > I really apreciate any help in this direction, > > > > Thank you very much, > > > > bogdan > hi, > > a dmesg is absolutely needed to diagnose your problem (or > rather the > computer's ;-) ) > could you perhaps make pictures of the dmesg? > > cheers, > jasper > > -- > "Intelligence should guide our actions, but in harmony > with the > texture of the situation at hand" > -- Francisco Varela
