On Thu, Feb 19, 2009 at 11:04:35AM -0500, (private) HKS wrote:
> On Thu, Feb 19, 2009 at 10:42 AM, Michael <bsd...@cableone.net> wrote:
> > I am trying (again) to get wireless working with OpenBSD 4.4. Following are
> > /etc files and dmesg.
> > With "debug" entered into my /etc/hostname.bwi0, I get "sending probe_req
> > ff:ff:ff:ff:ff:ff" and then "bwi0: no network....sleeping"
> > Router is linksys wrt54g2 and card on laptop is broadcom 4318 11g. Router
> > is set up for wpa wpa2.
> > I can't get any type of connection at all.
> > Hope the info helps. I've tried every item in /etc/hostname.bwi0, plus not
> > using that file and just trying via ifconfig (as root) to set up connection
> > with no luck.
> >
> > Here are the files:
> >
> > # ifconfig bwi0
> > bwi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> > lladdr 00:16:ce:49:a8:e1
> > groups: wlan
> > media: IEEE802.11 autoselect mode 11g (DS1 mode 11g)
> > status: no network
> > ieee80211: nwid xxxx chan 6 wpapsk 0xmynwkey wpaprotos wpa1,wpa2
> > wpaakms psk,802.1x wpaciphers tkip,ccmp wpagroupcipher tkip
> > inet6 fe80::216:ceff:fe49:a8e1%bwi0 prefixlen 64 scopeid 0x2
> >
> > /etc/hostname.bwi0
> > dhcp
> > #dhcp NONE NONE NONE nwid xxxx mode 11g chan 6
> > #dhcp nwid xxxx nwkey 0xmynwkey
> > #dhcp nwid xxxx wpa wpapsk 0xmynwkey chan 6 up
> > #dhcp NONE NONE NONE chan 6 wpa wpapsk $(wpa-psk xxxx xxxxx) media
> > autoselect mode 11g up debug
> > #dhcp up chan 6 nwid xxxx wpa wpapsk $(wpa-psk xxxx xxxx) debug
> >
> > /etc/mygate
> > 192.168.1.1 ( I just tried with this set 3 or 4 times)
> >
> > dmesg
> > OpenBSD 4.4-stable (GENERIC) #1: Mon Jan 19 16:25:07 MST 2009
> > r...@box.my.domain:/usr/src/sys/arch/i386/compile/GENERIC
> > cpu0: Mobile AMD Sempron(tm) Processor 3100+ ("AuthenticAMD" 686-class,
> > 256KB L2 cache) 1.81 GHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
> > cpu0: AMD erratum 89 present, BIOS upgrade may be required
> > real mem = 468217856 (446MB)
> > avail mem = 444178432 (423MB)
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 02/20/06, BIOS32 rev. 0 @ 0xfd5f0,
> > SMBIOS rev. 2.31 @ 0x1befb000 (24 entries)
> > bios0: vendor Acer version "3A32" date 02/20/06
> > bios0: Acer, inc. Aspire 3000
> > acpi at bios0 function 0x0 not configured
> > pcibios0 at bios0: rev 2.1 @ 0xfd5f0/0xa10
> > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdd30/160 (8 entries)
> > pcibios0: PCI Interrupt Router at 000:02:0 ("SiS 85C503 System" rev 0x00)
> > pcibios0: PCI bus #2 is the last bus
> > bios0: ROM list: 0xc0000/0xc000 0xdc000/0x8000!
> > cpu0 at mainbus0
> > cpu0: PowerNow! K8 1801 MHz: speeds: 1800 1600 800 MHz
> > pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> > pchb0 at pci0 dev 0 function 0 "SiS 760 PCI" rev 0x03
> > ppb0 at pci0 dev 1 function 0 "SiS 86C202 VGA" rev 0x00
> > pci1 at ppb0 bus 1
> > vga1 at pci1 dev 0 function 0 "SiS 6330 VGA" rev 0x00
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > agp0 at vga1: aperture at 0xe0000000, size 0x400000
> > drm at vga1 unsupported
> > pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x25
> > pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 760: DMA,
> > channel 0 configured to compatibility, channel 1 configured to compatibility
> > wd0 at pciide0 channel 0 drive 0: <HTS541060G9AT00>
> > wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
> > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> > atapiscsi0 at pciide0 channel 1 drive 0
> > scsibus0 at atapiscsi0: 2 targets, initiator 7
> > cd0 at scsibus0 targ 0 lun 0: <PHILIPS, CDRW/DVD SCB5265, TX07> ATAPI
> > 5/cdrom removable
> > cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> > "SiS 7013 Modem" rev 0xa0 at pci0 dev 2 function 6 not configured
> > auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: irq 5, SiS7012
> > AC97
> > ac97: codec id 0x414c4770 (Avance Logic ALC203 rev 0)
> > ac97: codec features headphone, 20 bit DAC, 18 bit ADC, No 3D Stereo
> > audio0 at auich0
> > ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 9, version
> > 1.0, legacy support
> > ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 11,
> > version 1.0, legacy support
> > ehci0 at pci0 dev 3 function 2 "SiS 7002 USB" rev 0x00: irq 10
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1
> > sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 0x91: irq 3,
> > address 00:16:36:3c:14:4a
> > rlphy0 at sis0 phy 13: RTL8201L 10/100 PHY, rev. 1
> > cbb0 at pci0 dev 6 function 0 "TI PCI1510 CardBus" rev 0x00: irq 3
> > bwi0 at pci0 dev 11 function 0 "Broadcom BCM4318" rev 0x02: irq 4, address
> > 00:16:ce:49:a8:e1
> > pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
> > pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
> > pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
> > kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pms0 at pckbc0 (aux slot)
> > pckbc0: using irq 12 for aux slot
> > wsmouse0 at pms0 mux 0
> > pcppi0 at isa0 port 0x61
> > midi0 at pcppi0: <PC speaker>
> > spkr0 at pcppi0
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > usb1 at ohci0: USB revision 1.0
> > uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
> > usb2 at ohci1: USB revision 1.0
> > uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1
> > cardslot0 at cbb0 slot 0 flags 0
> > cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
> > pcmcia0 at cardslot0
> > biomask efcd netmask efdd ttymask ffdf
> > mtrr: Pentium Pro MTRR support
> > softraid0 at root
> > root on wd0a swap on wd0b dump on wd0b
> > umass0 at uhub0 port 4 configuration 1 interface 0 "Memorex Flashdrive
> > 601B" rev 2.00/1.00 addr 2
> > umass0: using SCSI over Bulk-Only
> > scsibus1 at umass0: 2 targets, initiator 0
> > sd0 at scsibus1 targ 1 lun 0: <Memorex, Flashdrive 601B, PMAP> SCSI0
> > 0/direct removable
> > sd0: 477MB, 60 cyl, 255 head, 63 sec, 512 bytes/sec, 977664 sec total
> >
> >
> >
> > I hope this is enough info.
> > Thanks.
> >
> > Mike
>
>
> Verify you have /etc/firmware/bwi-airforce installed. Then turn off
> wpa on your router and try again.
>
> In 4.3 I was unable to get my bwi card working with WPA enabled.
> Sometimes it would connect and disconnect shortly after, other times
> it wouldn't connect at all. 4.4 may have fixed that, I haven't tested.
>
> -HKS
Downloaded the file from website mentioned in man page. Installed with pkg_add
:)
It is there.
I believe I tried turning off wpa on router, but will try again.
Thanks!
Mike
