I'am configuring ospfd on FreeBSD 6.4
I want transfer, for exmple x.x.x.0/24, network to cisco routers with the
next config:
# cat /usr/local/etc/ospfd.conf
# Global Configuration
router-id yy.yy.yy.yy
redistribute zz.zz.zz.0/27 (ospfd host and cisco network)
redistribute x.x.x.0/24
area 0.0.0.0 {
auth-type crypt
auth-md 1 "KE34rt#2d3)"
auth-md-keyid 1
interface vr0 { hello-interval 5
router-dead-time 20
}
}
When i start ospfd:
]# ospfd -d
startup
if_del: interface vr0
rde_asext_get: zz.zz.zz.0/27 is net LSA
orig_rtr_lsa: area 0.0.0.0
orig_rtr_lsa: stub net, interface vr0
if_fsm: event UP resulted in action START and changing state for interface
vr0 from DOWN to WAIT
spf_calc: area 0.0.0.0 calculated
if_act_elect: interface vr0 old dr none new dr yy.yy.yy.yy, old bdr none new
bdr none
orig_rtr_lsa: area 0.0.0.0
orig_rtr_lsa: stub net, interface vr0
orig_rtr_lsa: area 0.0.0.0
orig_rtr_lsa: stub net, interface vr0
if_fsm: event WAITTIMER resulted in action ELECT and changing state for
interface vr0 from WAIT to DR
rde_asext_get: zz.zz.zz.0/27 is net LSA
rde_asext_get: zz.zz.zz.0/27is net LSA
No route on cisco from ospfd daemon. Where I make mistakes?
