Hi,
Update, had an idea to try same adapters in second laptop, can't install OpenBSD
v4.5 from snapshot, but could run up bsd.rd off the install CD and get the
dmesg, as below, on this laptop the cards are detected.
OpenBSD 4.5 (RAMDISK_CD) #1112: Sat Feb 28 15:06:26 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Core(TM) Duo CPU T2500 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
real mem = 1063219200 (1013MB)
avail mem = 1021431808 (974MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/21/06, BIOS32 rev. 0 @ 0xfdbf4, SMBIOS
rev. 2.4 @ 0xe4f00 (65 entries)
bios0: vendor FUJITSU // Phoenix Technologies Ltd. version "Version 1.18" date
08/21/2006
bios0: FUJITSU SIEMENS LIFEBOOK S7110
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT MCFG SSDT SSDT APIC HPET BOOT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 8 (PCIB)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus 5 (RP03)
bios0: ROM list: 0xc0000/0xe600! 0xce800/0x1000 0xcfa00/0x1000 0xdc000/0x1c00!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel 82801GB HD Audio" rev 0x02 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 22
(irq 11)
pci1 at ppb0 bus 2
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8055" rev 0x12, Yukon-2 EC
Ultra rev. A1 (0x2): apic 2 int 16 (irq 11)
msk0 at mskc0 port A: address 00:17:42:30:80:2a
eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 21
(irq 11)
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 2 int 20
(irq 11)
pci3 at ppb2 bus 5
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 2 int
18 (irq 11): could not power ON adapter
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
(irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 20
(irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
(irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 8
cbb0 at pci4 dev 3 function 0 "O2 Micro OZ711MP1 CardBus" rev 0x21: apic 2 int
16 (irq 11)
"O2 Micro Firewire" rev 0x02 at pci4 dev 3 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 9 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-841S, 1.31> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: apic 2 int 19
(irq 11), AHCI 1.1
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST98823AS, 3.04> SCSI3 0/direct fixed
sd0: 76319MB, 512 bytes/sec, 156301488 sec total
"Intel 82801GB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
rd0: fixed, 3800 blocks
ep1 at pcmcia0 function 0 "3Com, Megahertz 574B, B" port 0xa000/32: address
00:01:03:fb:8c:a7
tqphy0 at ep1 phy 0: 78Q2120 10/100 PHY, rev. 10
umass0 at uhub0 port 2 configuration 1 interface 0 "vendor 0x0930 USB Flash
Memory" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <, USB Flash Memory, 1.04> SCSI0 0/direct
removable
sd1: 980MB, 512 bytes/sec, 2007040 sec total
"vendor 0x08ff Fingerprint Sensor" rev 1.10/6.21 addr 2 at uhub3 port 2 not
configured
"vendor 0x0c24 product 0x000f" rev 2.00/19.15 addr 2 at uhub4 port 2 not
configured
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
OpenBSD 4.5 (RAMDISK_CD) #1112: Sat Feb 28 15:06:26 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Core(TM) Duo CPU T2500 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
real mem = 1063219200 (1013MB)
avail mem = 1021431808 (974MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/21/06, BIOS32 rev. 0 @ 0xfdbf4, SMBIOS
rev. 2.4 @ 0xe4f00 (65 entries)
bios0: vendor FUJITSU // Phoenix Technologies Ltd. version "Version 1.18" date
08/21/2006
bios0: FUJITSU SIEMENS LIFEBOOK S7110
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT MCFG SSDT SSDT APIC HPET BOOT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 167MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 8 (PCIB)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus 5 (RP03)
bios0: ROM list: 0xc0000/0xe600! 0xce800/0x1000 0xcfa00/0x1000 0xdc000/0x1c00!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel 82801GB HD Audio" rev 0x02 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 22
(irq 11)
pci1 at ppb0 bus 2
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8055" rev 0x12, Yukon-2 EC
Ultra rev. A1 (0x2): apic 2 int 16 (irq 11)
msk0 at mskc0 port A: address 00:17:42:30:80:2a
eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 21
(irq 11)
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 2 int 20
(irq 11)
pci3 at ppb2 bus 5
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 2 int
18 (irq 11): could not power ON adapter
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
(irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 20
(irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
(irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 8
cbb0 at pci4 dev 3 function 0 "O2 Micro OZ711MP1 CardBus" rev 0x21: apic 2 int
16 (irq 11)
"O2 Micro Firewire" rev 0x02 at pci4 dev 3 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 9 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-841S, 1.31> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: apic 2 int 19
(irq 11), AHCI 1.1
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST98823AS, 3.04> SCSI3 0/direct fixed
sd0: 76319MB, 512 bytes/sec, 156301488 sec total
"Intel 82801GB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
rd0: fixed, 3800 blocks
rl0 at cardbus0 dev 0 function 0 "D-Link Systems DFE-690TXD" rev 0x10: irq
268570635, address 00:0d:88:29:0d:04
rlphy0 at rl0 phy 0: RTL internal PHY
"vendor 0x08ff Fingerprint Sensor" rev 1.10/6.21 addr 2 at uhub3 port 2 not
configured
"vendor 0x0c24 product 0x000f" rev 2.00/19.15 addr 2 at uhub4 port 2 not
configured
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
umass0 at uhub0 port 2 configuration 1 interface 0 "vendor 0x0930 USB Flash
Memory" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <, USB Flash Memory, 1.04> SCSI0 0/direct
removable
sd1: 980MB, 512 bytes/sec, 2007040 sec total
