I have found the mouse pointer being locked to the right edge as well, and very annoying. I can normally recover, the I move the middle mouse button up/down and press escape, that seems to release the mouse pointer for me, not much help if you have a two button mouse. I use an amd64 current build, and I found the issue is not confined to firefox/gnash.
Regards Nigel Taylor Ed Ahlsen-Girard wrote: > Running current from a Feb 28 snapshot, I have found that if either > mplayer or gnash (from snapshots) are installed, and if embedded media > gain focus in FireFox, the mouse pointer will slide to the right edge of > the window and stay there until the system is restarted. The pointer > can be moved up and down along the edge, but will not leave it, and > focus cannot be moved to another window. Ctrl-arrow keys have no > effect. A gnash core file of 8064892 bytes exists. Dmesg below, core > on request. > > Ed Ahlsen-Girard > > OpenBSD 4.4-current (GENERIC) #6: Fri Mar 6 22:42:12 CST 2009 > e...@puff.waynel.local:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 499 MHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE > > real mem = 335118336 (319MB) > avail mem = 315379712 (300MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 08/01/01, BIOS32 rev. 0 @ 0xffe90, > SMBIOS rev. 2.2 @ 0xfb410 (64 entries) > bios0: vendor Dell Computer Corporation version "A10" date 08/01/01 > bios0: Dell Computer Corporation OptiPlex GX1 500Mbr+ > apm0 at bios0: Power Management spec V1.2 > apm0: AC on, battery charge unknown > acpi at bios0 function 0x0 not configured > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc670/176 (9 entries) > pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA" > rev 0x00) > pcibios0: PCI bus #2 is the last bus > bios0: ROM list: 0xc0000/0xd000 0xd0000/0x8000 > cpu0 at mainbus0: (uniprocessor) > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03 > intelagp0 at pchb0 > agp0 at intelagp0: aperture at 0xf0000000, size 0x4000000 > ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03 > pci1 at ppb0 bus 1 > "ATI Rage Pro" rev 0x5c at pci1 dev 0 function 0 not configured > piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02 > pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, > channel 0 wired to compatibility, channel 1 wired to compatibility > wd0 at pciide0 channel 0 drive 0: <Maxtor 91024D4> > wd0: 16-sector PIO, LBA, 9765MB, 19999728 sectors > wd1 at pciide0 channel 0 drive 1: <WDC WD800JB-00JJC0> > wd1: 16-sector PIO, LBA, 76319MB, 156301488 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus0 at atapiscsi0: 2 targets, initiator 7 > cd0 at scsibus0 targ 0 lun 0: <HITACHI, CDR-8430, 0024> ATAPI 5/cdrom > removable > cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 > uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11 > piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x02: SMBus > disabled > vga1 at pci0 dev 14 function 0 "ATI Radeon 9200 SE Sec" rev 0x01 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > radeondrm0 at vga1: irq 9 > drm0 at radeondrm0 > ppb1 at pci0 dev 15 function 0 "DEC 21152 PCI-PCI" rev 0x03 > pci2 at ppb1 bus 2 > ohci0 at pci2 dev 11 function 0 "Acer Labs M5237 USB" rev 0x03: irq 9, > version 1.0, legacy support > ehci0 at pci2 dev 11 function 3 "Acer Labs M5239 USB2" rev 0x01: irq 10 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1 > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 > xl0 at pci0 dev 17 function 0 "3Com 3c905B 100Base-TX" rev 0x24: irq 11, > address 00:c0:4f:22:a7:b8 > exphy0 at xl0 phy 24: 3Com internal media interface > isa0 at piixpcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pmsi0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pmsi0 mux 0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec > isapnp0 at isa0 port 0x279: read port 0x203 > wss1 at isapnp0 "CS4236B, CSC0000, , WSS/SB" port > 0x534/4,0x388/4,0x220/16 irq 5 drq 1,0: CS4236/CS4236B (vers 0) > audio0 at wss1 > joy0 at isapnp0 "CS4236B, CSC000F, , Game" port 0x3a0/8 > "CS4236B, CSC0010, , Ctrl" at isapnp0 port 0xf00/8 not configured > "CS4236B, CSC0003, , MPU" at isapnp0 port 0x330/2 not configured > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > biomask ef45 netmask ef45 ttymask ffdf > mtrr: Pentium Pro MTRR support > ugen0 at uhub1 port 2 "OMNIKEY AG Smart Card Reader USB" rev 1.10/2.00 > addr 2 > softraid0 at root > root on wd1a swap on wd1b dump on wd1b > radeondrm0: Setting GART location based on new memory map > radeondrm0: Loading R200 Microcode > radeondrm0: writeback test succeeded in 1 usecs