Hi folks.
I have 4.5 GENERIC.MP on my machine and I'd like to have it dual-head.
My dmesg is at the bottom, if you want more information or output, I'll give
that.
I tried to setup new xorg.conf with two screens but without any luck.
I also googled for any idea, but it also fails.
It works on linux with modified config, but I don't want it on my machines.
Every idea or question is welcome. Thanks.
OpenBSD 4.5-beta (GENERIC.MP) #63: Tue Feb 10 07:57:12 MST 2009
t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,
SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
real mem = 2146988032 (2047MB)
avail mem = 2067771392 (1971MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/08/05, BIOS32 rev. 0 @ 0xfac20, SMBIOS
rev. 2.3 @ 0xf0100 (39 entries)
bios0: vendor Award Software International, Inc. version "F6" date 11/08/2005
bios0: Gigabyte Technology Co., Ltd. 8I945GMF
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP MCFG APIC
acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5)
HUB0(S5) USB0(S1) USB1(S1) USB2(S1) USB3(S1) USBE
(S1) AC97(S5) MC97(S5) AZAL(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,
SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PEX0)
acpiprt2 at acpi0: bus 3 (PEX1)
acpiprt3 at acpi0: bus -1 (PEX2)
acpiprt4 at acpi0: bus -1 (PEX3)
acpiprt5 at acpi0: bus -1 (PEX4)
acpiprt6 at acpi0: bus -1 (PEX5)
acpiprt7 at acpi0: bus 4 (HUB0)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xda00
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82945G PCIE" rev 0x02: apic 2 int 16 (irq
12)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 7300 GT" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: apic 2 int
16 (irq 12)
azalia0: RIRB time out
azalia0: codecs: Realtek ALC882
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int 16
(irq 12)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 2 int 17
(irq 10)
pci3 at ppb2 bus 3
mskc0 at pci3 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x19, Yukon-2 EC
rev. A2 (0x1): apic 2 int 17 (irq 10)
msk0 at mskc0 port A: address 00:14:85:e3:0f:c7
eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23
(irq 5)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 19
(irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18
(irq 9)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 16
(irq 12)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23
(irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci4 at ppb3 bus 4
"TI TSB43AB23 FireWire" rev 0x00 at pci4 dev 7 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD5001ABYS-01YNA0>
wd0: 16-sector PIO, LBA48, 476938MB, 976771055 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, DVD-ROM SH-D162C, TS03> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int 19
(irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int 19
(irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8712F rev 7, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/43.01 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhub5 at uhub4 port 2 "ALCOR Generic USB Hub" rev 1.10/3.12 addr 3
uhidev1 at uhub5 port 4 configuration 1 interface 0 " USB Keyboard" rev
1.10/3.10 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub5 port 4 configuration 1 interface 1 " USB Keyboard" rev
1.10/3.10 addr 4
uhidev2: iclass 3/0, 2 report ids
uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=3, output=0, feature=0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
--
Kamil Monticolo
