Hi again, file up on http://tomta.mine.nu/temp/lifebook.tgz
Thanks! 2009/4/3 Stuart Henderson <s...@spacehopper.org>: > On 2009-04-03, Karl Karlsson <dardos1...@gmail.com> wrote: >> Hi, sorry for this really bad report but laptop without serial port is >> not easy (for me anyway) to debug. It seems acpi broke hard on this >> machine somewhere between 28 of februari and snapshot from 1:st of >> april. Disabling acpi in kernel allows it to boot, otherwise panics >> really fast. >> >> The only information i can provide from panic boot and trace and ps >> output is on really bad pictures from even worse fucking canon camera. >> >> http://tomta.mine.nu/temp/(1|2|3|4).jpg > > transcribed a bit (which is probably easier than it was for you to > find the camera, take photos, transfer the files and upload them): > > ... > _0xd1ac68744 cnt:01 stk:00 integer: ed8 > _0xd1ac68704 cnt:01 stk:00 integer: d48 > _0xd1ac686c4 cnt:01 stk:00 integer: d48 > Index out of bounds 204/4 > > fc0cd Called: \_SB_.CMB1._BIF > panic: aml_die aml_xparse:3697 > ... > > the trace has aml_xparse, aml_xeval, aml_evalnode, acpibat_getbif, > acpibat_attach. > > it might help to put the acpidump files somewhere. > > mkdir lifebook; cd lifebook > sudo acpidump -o lifebook > lifebook.txt > dmesg > lifebook.dmesg > cd ..; tar czf lifebook.tgz lifebook > > then put it online and send the url. > > > > >> Machine is an quite old Fujitsu Siemens lifebook s7010d >> >> Dmesg follows: >> OpenBSD 4.5-current (GENERIC) #31: Wed Apr 1 13:10:50 MDT 2009 >> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC >> cpu0: Intel(R) Pentium(R) M processor 1.70GHz ("GenuineIntel" >> 686-class) 1.71 GHz >> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,F XSR,SSE,SSE2,SS,TM,SBF,EST,TM2 >> real mem = 1063809024 (1014MB) >> avail mem = 1020321792 (973MB) >> User Kernel Config >> UKC> disav\^H \^Hble acpi >> 461 acpi0 disabled >> UKC> quit >> Continuing... >> mainbus0 at root >> bios0 at mainbus0: AT/286+ BIOS, date 08/30/04, BIOS32 rev. 0 @ >> 0xfd710, SMBIOS rev. 2.3 @ 0xe7540 (60 entries) >> bios0: vendor FUJITSU // Phoenix Technologies Ltd. version "Version >> 1.11" date 08/30/2004 >> bios0: FUJITSU SIEMENS LIFEBOOK S7010 >> acpi at bios0 function 0x0 not configured >> pcibios0 at bios0: rev 2.1 @ 0xfd710/0x8f0 >> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries) >> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) >> pcibios0: PCI bus #3 is the last bus >> bios0: ROM list: 0xc0000/0xd400! 0xdc000/0x4000! >> cpu0 at mainbus0: (uniprocessor) >> cpu0: Enhanced SpeedStep 1700 MHz (1340 mV): speeds: 1700, 1400, 1200, >> 1000, 800, 600 MHz >> pci0 at mainbus0 bus 0: configuration mode 1 (no bios) >> pchb0 at pci0 dev 0 function 0 "Intel 82855GM Host" rev 0x02 >> "Intel 82855GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured >> "Intel 82855GM Config" rev 0x02 at pci0 dev 0 function 3 not configured >> vga1 at pci0 dev 2 function 0 "Intel 82855GM Video" rev 0x02 >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >> intagp0 at vga1 >> agp0 at intagp0: aperture at 0xd8000000, size 0x8000000 >> inteldrm0 at vga1: irq 11 >> drm0 at inteldrm0 >> "Intel 82855GM Video" rev 0x02 at pci0 dev 2 function 1 not configured >> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 11 >> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 11 >> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x03: irq 11 >> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 11 >> usb0 at ehci0: USB revision 2.0 >> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >> ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83 >> pci1 at ppb0 bus 1 >> cbb0 at pci1 dev 10 function 0 "O2 Micro OZ6933 CardBus" rev 0x20: irq 11 >> cbb1 at pci1 dev 10 function 1 "O2 Micro OZ6933 CardBus" rev 0x20: irq 11 >> bge0 at pci1 dev 12 function 0 "Broadcom BCM5705M Alt" rev 0x03, >> BCM5705 A3 (0x3003): irq 11, address 00:0b:5d:55:9e:b0 >> brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2 >> iwi0 at pci1 dev 13 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: >> irq 11, address 00:0e:35:6f:f7:1b >> "TI TSB43AB21 FireWire" rev 0x00 at pci1 dev 14 function 0 not configured >> cardslot0 at cbb0 slot 0 flags 0 >> cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20 >> pcmcia0 at cardslot0 >> cardslot1 at cbb1 slot 1 flags 0 >> cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x20 >> pcmcia1 at cardslot1 >> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03: >> 24-bit timer at 3579545Hz >> pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA, >> channel 0 configured to compatibility, channel 1 configured to >> compatibility >> wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK4025GAS> >> wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors >> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 >> atapiscsi0 at pciide0 channel 1 drive 0 >> scsibus0 at atapiscsi0: 2 targets >> cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA750FDVD/CDRW, 1.22> ATAPI >> 5/cdrom removable >> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 >> ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x03: irq 11 >> iic0 at ichiic0 >> iic0: addr 0x19 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 >> 09=00 0a=00 0b=00 0c=00 0d=00 0e=00 0f=00 10=00 11=20 24=00 b9=00 >> ba=00 words 00=0000 01=0000 02=0000 03=0000 04=0040 05=0000 06=0000 >> 07=0000 >> auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq >> 11, ICH4 AC97 >> ac97: codec id 0x83847650 (SigmaTel STAC9750/51) >> ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D >> audio0 at auich0 >> "Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured >> usb1 at uhci0: USB revision 1.0 >> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb2 at uhci1: USB revision 1.0 >> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb3 at uhci2: USB revision 1.0 >> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> isa0 at ichpcib0 >> isadma0 at isa0 >> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo >> pckbc0 at isa0 port 0x60/5 >> pckbd0 at pckbc0 (kbd slot) >> pckbc0: using irq 1 for kbd slot >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 >> pms0 at pckbc0 (aux slot) >> pckbc0: using irq 12 for aux slot >> wsmouse0 at pms0 mux 0 >> pcppi0 at isa0 port 0x61 >> midi0 at pcppi0: <PC speaker> >> spkr0 at pcppi0 >> lpt0 at isa0 port 0x378/4 irq 7 >> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 >> biomask ef6d netmask ef6d ttymask ffff >> mtrr: Pentium Pro MTRR support >> ubt0 at uhub3 port 2 "ALPS USB BT" rev 1.10/11.68 addr 2 >> softraid0 at root >> root on wd0a swap on wd0b dump on wd0b
