On Wed, May 13, 2009 at 05:50:40AM +0000, Uwe Dippel wrote: > Uwe Dippel <udippel <at> uniten.edu.my> writes: > > > Now I wonder what to do. Will a traditional fsck do, or do I have to > > recreate the softraid? > > I guess, I can answer this myself, in the meantime: > I did the fsck of the softraid volume sd3a and sd3b > (the first one was clean, to be expected, the second not; > but marked clean with fsck). > Then I mounted it again: > > # fsck /dev/sd3b > ** /dev/rsd3b > ** Last Mounted on /mnt > ** Phase 1 - Check Blocks and Sizes > > ** Phase 2 - Check Pathnames > ** Phase 3 - Check Connectivity > ** Phase 4 - Check Reference Counts > ** Phase 5 - Check Cyl groups > SUMMARY INFORMATION BAD > SALVAGE? [Fyn?] SALVAGE? [Fyn?] y > > BLK(S) MISSING IN BIT MAPS > SALVAGE? [Fyn?] y > > 1 files, 1 used, 128675303 free > (15 frags, 16084411 blocks, 0.0% fragmentation) > > MARK FILE SYSTEM CLEAN? [Fyn?] y > > > ***** FILE SYSTEM WAS MODIFIED ***** > # mount /dev/sd3b /mnt/ > > # cd /mnt/ > > # ls -l > # > [that's okay, I never put anything there] > # pwd > /mnt > # echo Nonsense > testo > [that's not okay, because it got me another hangman]
Trace. I bet it is a fatal filesystem panic because your disk is basically hosed. > > If anyone was interested, I have all the 'trace'es and 'ps'es on camera. > > I guess it is time for a dmesg as well: > OpenBSD 4.4 (GENERIC.MP) #0: Fri Jan 23 14:33:38 SGT 2009 > r...@claude2.uwe.uniten.edu.my:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4214460416 (4019MB) > avail mem = 4092596224 (3903MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xec000 (62 entries) > bios0: vendor HP version "D17" date 07/16/2007 > bios0: HP ProLiant ML350 G4 > acpi0 at bios0: rev 2 > acpi0: tables DSDT FACP SPCR MCFG APIC > acpi0: wakeup devices > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Xeon(TM) CPU 3.00GHz, 3000.52 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, > CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL, > CNXT-ID,CX16,xTPR,LONG > cpu0: 1MB 64b/line 8-way L2 cache > cpu0: apic clock running at 200MHz > cpu1 at mainbus0: apid 6 (application processor) > cpu1: Intel(R) Xeon(TM) CPU 3.00GHz, 3000.11 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, > CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL, > CNXT-ID,CX16,xTPR,LONG > cpu1: 1MB 64b/line 8-way L2 cache > ioapic0 at mainbus0 apid 8 pa 0xfec00000, version 20, 24 pins > ioapic1 at mainbus0 apid 9 pa 0xfec10000, version 20, 24 pins > ioapic1: misconfigured as apic 0, remapped to apid 9 > ioapic2 at mainbus0 apid 10 pa 0xfec80000, version 20, 24 pins > ioapic3 at mainbus0 apid 11 pa 0xfec80400, version 20, 24 pins > acpiprt0 at acpi0: bus 1 (IP2P) > acpiprt1 at acpi0: bus 2 (IPXB) > acpiprt2 at acpi0: bus 6 (PCXA) > acpiprt3 at acpi0: bus 9 (PCXB) > acpiprt4 at acpi0: bus 5 (PTA0) > acpiprt5 at acpi0: bus 13 (PTB0) > acpiprt6 at acpi0: bus 16 (PTC0) > acpiprt7 at acpi0: bus 0 (PCI0) > acpicpu0 at acpi0 > acpicpu1 at acpi0 > acpitz0 at acpi0: critical temperature 31 degC > pci0 at mainbus0 bus 0: configuration mode 1 > pchb0 at pci0 dev 0 function 0 "Intel E7520 Host" rev 0x0c > ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x0c > pci1 at ppb0 bus 5 > ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 > pci2 at ppb1 bus 6 > ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09 > pci3 at ppb2 bus 9 > ppb3 at pci0 dev 4 function 0 "Intel E7520 PCIE" rev 0x0c > pci4 at ppb3 bus 13 > ppb4 at pci0 dev 6 function 0 "Intel E7520 PCIE" rev 0x0c > pci5 at ppb4 bus 16 > ppb5 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02 > pci6 at ppb5 bus 2 > mpi0 at pci6 dev 3 function 0 "Symbios Logic 53c1030" rev 0x08: > apic 9 int 0 (irq 5) > scsibus0 at mpi0: 16 targets, initiator 7 > sd0 at scsibus0 targ 0 lun 0: <COMPAQ, BF03688284, HPB3> SCSI3 0/direct fixed > sd0: 34732MB, 50824 cyl, 2 head, 699 sec, 512 bytes/sec, 71132000 sec total > sd1 at scsibus0 targ 3 lun 0: <COMPAQ, BF3008AFEC, HPB1> SCSI3 0/direct fixed > sd1: 286102MB, 82594 cyl, 8 head, 886 sec, 512 bytes/sec, 585937500 sec total > sd2 at scsibus0 targ 5 lun 0: <COMPAQ, BF3008AFEC, HPB1> SCSI3 0/direct fixed > sd2: 286102MB, 82594 cyl, 8 head, 886 sec, 512 bytes/sec, 585937500 sec total > mpi0: target 0 Sync at 160MHz width 16bit offset 63 QAS 1 DT 1 IU 1 > mpi0: target 3 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1 > mpi0: target 5 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1 > mpi1 at pci6 dev 3 function 1 "Symbios Logic 53c1030" rev 0x08: apic 9 > int 1 (irq 5) > scsibus1 at mpi1: 16 targets, initiator 7 > uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: apic 8 > int 16 (irq 5) > uhci1 at pci0 dev 29 function 1 "Intel 6300ESB USB" rev 0x02: apic 8 > int 19 (irq 5) > "Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured > "Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured > ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: apic 8 > int 23 (irq 5) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x0a > pci7 at ppb6 bus 1 > bge0 at pci7 dev 2 function 0 "Broadcom BCM5705K" rev 0x03, BCM5705 A3 > 0x3003): apic 8 int 17 (irq 5), address 00:13:21:ae:d5:03 > brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2 > vga1 at pci7 dev 3 function 0 "ATI Rage XL" rev 0x27 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > drm at vga1 unsupported > vendor "Compaq", unknown product 0x00d7 (class system subclass > miscellaneous, rev 0x01) at pci7 dev 4 function 0 not configured > pcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02 > pciide0 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA, > channel 0 configured to compatibility, channel 1 configured to compatibility > pciide0: channel 0 disabled (no drives) > atapiscsi0 at pciide0 channel 1 drive 1 > scsibus2 at atapiscsi0: 2 targets, initiator 7 > cd0 at scsibus2 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8482B, 2.09> > ATAPI 5/cdrom removable > cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pmsi0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pmsi0 mux 0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec > mtrr: Pentium Pro MTRR support > softraid0 at root > scsibus3 at softraid0: 1 targets, initiator 1 > sd3 at scsibus3 targ 0 lun 0: <OPENBSD, SR RAID 1, 003> SCSI2 0/direct fixed > sd3: 286094MB, 36471 cyl, 255 head, 63 sec, 512 bytes/sec, > 585922538 sec total > root on sd0a swap on sd0b dump on sd0b > WARNING: / was not properly unmounted > > Uwe
