Hello misc@,
I am trying to use 3G technology in OpenBSD. Currently my problem is that
I can not navigate, I modified the dns's, and exchanged some information
from /etc/ppp/options, still not provided. Below some information that
might help in solving the problem:
uname:
OpenBSD murilo.dotbsd.org 4.5 BUDA#8 i386
dmesg:
OpenBSD 4.5-current (BUDA) #8: Fri May 8 14:49:24 UTC 2009
r...@murilo.dotbsd.org:/usr/src/sys/arch/i386/compile/BUDA
cpu0: Intel(R) Core(TM) Duo CPU T2350 @ 1.86GHz ("GenuineIntel" 686-class)
1.87 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,TM2,xTPR
real mem = 1063284736 (1014MB)
avail mem = 1019748352 (972MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/15/07, BIOS32 rev. 0 @ 0xfdc94,
SMBIOS rev. 2.4 @ 0xdc010 (38 entries)
bios0: vendor NEC COMPUTERS SAS version "NOTE BIOS Version Q4A04" date
02/15/2007
bios0: NEC COMPUTERS SAS NEC VERSA M360
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC HPET MCFG SLIC APIC BOOT SSDT SSDT SSDT
acpi0: wakeup devices LID0(S3) HDEF(S4) PXS1(S4) PXS2(S4) PXS3(S4)
PXS4(S4) PXS5(S4) PXS6(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB7(S3)
LANC(S4) MODM(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) Duo CPU T2350 @ 1.86GHz ("GenuineIntel" 686-class)
1.87 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,TM2,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGP)
acpiprt2 at acpi0: bus -1 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus 2 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0
acpicpu1 at acpi0
acpitz0 at acpi0: critical temperature 100 degC
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibat0 at acpi0: BAT1 model "EUP-K2-B-40" serial type NiMH oem "NEC "
acpiac0 at acpi0: AC unit offline
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0xec00! 0xdc000/0x4000! 0xe0000/0x1c00!
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130e2c06000613
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 800 MHz (1004 mV): speeds: 1867, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic
1 int 22 (irq 10)
azalia0: codecs: Realtek ALC262, AT&T/Lucent/0x3026, using Realtek ALC262
audio0 at azalia0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int
23 (irq 10)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int
19 (irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int
18 (irq 10)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int
16 (irq 10)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int
23 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci1 at ppb0 bus 2
re0 at pci1 dev 0 function 0 "Realtek 8169SC" rev 0x10: RTL8169/8110SCd
(0x1800), apic 1 int 19 (irq 10), address 00:1b:24:1f:d4:7d
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
cbb0 at pci1 dev 7 function 0 "Ricoh 5C476 CardBus" rev 0xb4: apic 1 int
16 (irq 255)
sdhc0 at pci1 dev 7 function 1 "Ricoh 5C822 SD/MMC" rev 0x18: apic 1 int
18 (irq 10)
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x00 at pci1 dev 7 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x09 at pci1 dev 7 function 3 not configured
"Ricoh 5C852 xD" rev 0x04 at pci1 dev 7 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJ-850D, 1.10> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 1 int 19 (irq 10) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST9120822AS>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1
int 19 (irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
rum0 at uhub0 port 7 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 2
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:0d:f0:39:0a:16
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
ehci_idone: ex=0xd1d30600 is done!
ehci_idone: ex=0xd1d30600 is done!
umsm0 at uhub0 port 2 configuration 1 interface 0 "HUAWEI Technology
HUAWEI Mobile" rev 2.00/0.00 addr 3
umsm0: umass only mode. need to reattach
umsm0 detached
umsm0 at uhub0 port 2 configuration 1 interface 0 "HUAWEI Technology
HUAWEI Mobile" rev 2.00/0.00 addr 3
ucom0 at umsm0
umsm1 at uhub0 port 2 configuration 1 interface 1 "HUAWEI Technology
HUAWEI Mobile" rev 2.00/0.00 addr 3
ucom1 at umsm1
umass0 at uhub0 port 2 configuration 1 interface 2 "HUAWEI Technology
HUAWEI Mobile" rev 2.00/0.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
cd1 at scsibus1 targ 1 lun 0: <HUAWEI, Mass Storage, 2.31> SCSI2 5/cdrom
removable
umsm2 at uhub0 port 2 configuration 1 interface 3 "HUAWEI Technology
HUAWEI Mobile" rev 2.00/0.00 addr 3
/etc/ppp/options
connect-delay 10000
ipcp-max-configure 40
ipcp-max-failure 40
/etc/resolv.conf
nameserver 208.67.222.222
nameserver 208.67.220.220
/etc/ppp/ppp.conf
default:
set device /dev/cuaU0
set speed 230400
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\"\" AT OK-AT-OK ATE1Q0s7=60 OK \\dATDT\\T TIMEOUT
40 CONNECT"
set phone "*99***1#"
set login
set authname ****
set authkey ****
set timeout 120
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR
enable dns
# ppp
Working in interactive mode
Using interface: tun0
ppp ON murilo> dial
ppp ON murilo>
Ppp ON murilo>
PPp ON murilo> Warning: 0.0.0.0/0: Change route failed: errno: No such
process
Warning: ff01:5::/32: Change route failed: errno: Network is unreachable
Warning: ff02:5::/32: Change route failed: errno: Network is unreachable
Warning: ff02:5::/32: Change route failed: errno: Network is unreachable
PPP ON murilo>
ifconfig tun0:
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
priority: 0
groups: tun egress
inet 187.27.201.76 --> 10.0.0.2 netmask 0xffffff00
$ ping -c 4 www.google.com
PING google.navigation.opendns.com (208.69.32.231): 56 data bytes
64 bytes from 208.69.32.231: icmp_seq=0 ttl=51 time=679.708 ms
64 bytes from 208.69.32.231: icmp_seq=1 ttl=51 time=634.976 ms
64 bytes from 208.69.32.231: icmp_seq=2 ttl=51 time=494.942 ms
64 bytes from 208.69.32.231: icmp_seq=3 ttl=51 time=564.820 ms
--- google.navigation.opendns.com ping statistics ---
4 packets transmitted, 4 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 494.942/593.611/679.708/70.161 ms
lynx www.openbsd.org
HTTP request sent; waiting for response.
.............. 10 min ......... 20 min........
--
MuriloBSD
silc.dotbsd.org, dotbsd
http://www.dotbsd.org/
