the new "match" keyword is what your looking for:
http://www.openbsd.org/faq/current.html#20090406
J
On Wed, Jun 3, 2009 at 10:36 PM, Duncan Patton a Campbell <
campb...@neotext.ca> wrote:
> Howdy List?
>
> I just upgraded to the snapshot-1 because the current, June 3, goes into
> an error on encountering a scsi raid. So I dropped back to the May 31
> and now pf doesn't like the scrub syntax..
>
> pfctl -f pf.conf
> pf.conf:63: syntax error
> pfctl: Syntax error in config file: pf rules not loaded
>
> on
>
> scrub in all
> or
> scrub in on ext_if_vr0 all
>
> as line 63. If commented out, everything seems (so far) to work as before.
>
> Following is the dmesg for this machine.
>
> Thanks,
>
> Dhu
>
>
> OpenBSD 4.5-current (GENERIC.MP) #18: Sun May 31 10:35:36 MDT 2009
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3.04 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR
> real mem = 2146988032 (2047MB)
> avail mem = 2067677184 (1971MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 01/04/06, BIOS32 rev. 0 @ 0xfb180,
> SMBIOS rev. 2.3 @ 0xf0100 (39 entries)
> bios0: vendor Award Software International, Inc. version "F10" date
> 01/04/2006
> bios0: Gigabyte Technology Co., Ltd. 8I945P-G
> acpi0 at bios0: rev 0
> acpi0: tables DSDT FACP MCFG APIC
> acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5)
> HUB0(S5) USB0(S1) USB1(S1) USB2(S1) USB3(S1) USBE(S1) AC97(S5) MC97(S5)
> AZAL(S5) PCI0(S5)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 200MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3.02 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 2
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (PEX0)
> acpiprt2 at acpi0: bus -1 (PEX1)
> acpiprt3 at acpi0: bus 3 (PEX2)
> acpiprt4 at acpi0: bus -1 (PEX3)
> acpiprt5 at acpi0: bus -1 (PEX4)
> acpiprt6 at acpi0: bus -1 (PEX5)
> acpiprt7 at acpi0: bus 4 (HUB0)
> acpicpu0 at acpi0
> acpicpu1 at acpi0
> acpibtn0 at acpi0: PWRB
> bios0: ROM list: 0xc0000/0xd000 0xd0000/0x5800
> cpu0: Enhanced SpeedStep disabled by BIOS
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x81
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: apic 2
> int 16 (irq 7)
> azalia0: RIRB time out
> azalia0: codecs: Realtek ALC882
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int 16
> (irq 7)
> pci1 at ppb0 bus 1
> ppb1 at pci1 dev 0 function 0 vendor "PLX", unknown product 0x8111 rev 0x21
> pci2 at ppb1 bus 2
> ohci0 at pci2 dev 0 function 0 "NEC USB" rev 0x43: apic 2 int 16 (irq 7),
> version 1.0
> ohci1 at pci2 dev 0 function 1 "NEC USB" rev 0x43: apic 2 int 17 (irq 4),
> version 1.0
> ehci0 at pci2 dev 0 function 2 "NEC USB" rev 0x04: apic 2 int 18 (irq 5)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1
> usb2 at ohci1: USB revision 1.0
> uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
> ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: apic 2 int 18
> (irq 5)
> pci3 at ppb2 bus 3
> bge0 at pci3 dev 0 function 0 "Broadcom BCM5789" rev 0x11, BCM5750 B1
> (0x4101): apic 2 int 18 (irq 5), address 00:14:85:15:50:b5
> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23
> (irq 3)
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 19
> (irq 10)
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18
> (irq 5)
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 16
> (irq 7)
> ehci1 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23
> (irq 3)
> usb3 at ehci1: USB revision 2.0
> uhub3 at usb3 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
> pci4 at ppb3 bus 4
> ahc0 at pci4 dev 0 function 0 "Adaptec AHA-2940U2 U2" rev 0x00: apic 2 int
> 20 (irq 11)
> scsibus0 at ahc0: 16 targets, initiator 7
> sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAN3184MP, 0108> SCSI3 0/direct
> fixed
> sd0: 17522MB, 512 bytes/sec, 35885448 sec total
> vr0 at pci4 dev 1 function 0 "VIA VT6105 RhineIII" rev 0x86: apic 2 int 19
> (irq 10), address 00:15:e9:87:4a:38
> ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 4: OUI
> 0x004063, model 0x0034
> vga1 at pci4 dev 2 function 0 "ATI Radeon 9200 PRO" rev 0x01
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> radeondrm0 at vga1: apic 2 int 18 (irq 5)
> drm0 at radeondrm0
> "ATI Radeon 9200 PRO Sec" rev 0x01 at pci4 dev 2 function 1 not configured
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM
> disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
> channel 0 configured to compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4160B, A306> ATAPI
> 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
> pciide0: channel 1 disabled (no drives)
> pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide1: using apic 2 int 19 (irq 10) for native-PCI interrupt
> wd0 at pciide1 channel 0 drive 0: <ST3500320AS>
> wd0: 16-sector PIO, LBA48, 476938MB, 976771055 sectors
> wd1 at pciide1 channel 0 drive 1: <ST3500320AS>
> wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
> wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
> wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
> wd2 at pciide1 channel 1 drive 1: <ST3500320AS>
> wd2: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
> wd2(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2
> int 19 (irq 10)
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL5
> spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL5
> usb4 at uhci0: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci1: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci2: USB revision 1.0
> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb7 at uhci3: USB revision 1.0
> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> it0 at isa0 port 0x2e/2: IT8712F rev 7, EC port 0x290
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> axe0 at uhub0 port 3 configuration 1 interface 0 "Cisco-Linksys USB200M v2"
> rev 2.00/0.01 addr 2
> axe0: AX88772, address 00:1d:7e:00:21:e4
> ukphy1 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI
> 0x000ec6, model 0x0001
> ulpt0 at uhub6 port 1 configuration 1 interface 0 "Brother Industries
> product 0x0183" rev 1.00/1.00 addr 2
> ulpt0: using bi-directional mode
> softraid0 at root
> ahc0: target 0 using 16bit transfers
> ahc0: target 0 synchronous at 20.0MHz, offset = 0x7f
> scsibus2 at softraid0: 1 targets
> sd1 at scsibus2 targ 0 lun 0: <OPENBSD, SR RAID 1, 003> SCSI2 0/direct
> fixed
> sd1: 476937MB, 512 bytes/sec, 976767923 sec total
> root on sd0a swap on sd0b dump on sd0b
