Hello all. I've been settings up a serial terminal for my box, and I've
run into some issues.
When 'set tty com0' is NOT used...
I can `tip tty00` and talk to the terminal (PuTTY serial on WinXP) just
fine, chatting back and forth.
Setting up getty on cua00 ('cua00 "/usr/libexec/getty" std.9600 vt220 on
secure' in /etc/ttys, `kill -HUP 1`), getty attaches to /dev/cua00, and
I can login from the serial terminal. Everything is of course screwed
up with no controlling terminal.
Setting up getty on tty00 ('tty00 "/usr/libexec/getty" std.9600 vt220 on
secure' in /etc/ttys, `kill -HUP 1`), getty attaches to /dev/tty00, but
nothing happens on the terminal (tried sending many newlines, ^E,
breaks, etc).
When 'set tty com0' is used...
Boot messages galore, and...
Setting up getty on tty00 ('tty00 "/usr/libexec/getty" std.9600 vt220 on
secure' in /etc/ttys, `kill -HUP 1`) == happy terminal.
This occurs on both my toy box (amd64 4.6-beta Jun 22, 2009, complete
boot below), and an i386 4.5-RELEASE, both GENERIC.
Is this by design (trusted path?)? I saw nothing to imply that in any
of the related man pages, and if so it would kinda break the example in
the FAQ.
Any thoughts?
# reboot
/etc/rc.shutdown in progress...
/etc/rc.shutdown complete.
syncing disks... done
rebooting...
>> OpenBSD/amd64 BOOT 3.01
boot>
booting hd0a:/bsd: 4909964+987526+891400+0+610048
[80+449040+285560]=0xbc27d8
entry point at 0x1001e0 [7205c766, 34000004, 24448b12, 8560a304]
[ using 735448 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2009 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.6-beta (GENERIC) #0: Mon Jun 22 12:39:23 CDT 2009
r...@wayfarer.autocity.local:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1061527552 (1012MB)
avail mem = 1018380288 (971MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf0450 (73 entries)
bios0: vendor Dell Inc. version "A01" date 11/28/2008
bios0: Dell Inc. OptiPlex 360
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT APIC BOOT MCFG HPET SLIC
acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI2(S5) PCI3(S5)
PCI1(S5) PCI5(S5) PCI6(S5) MOU_(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU 440 @ 2.00GHz, 1995.23 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CX16,xTPR,NXE,LONG
cpu0: 512KB 64b/line 2-way L2 cache
cpu0: apic clock running at 199MHz
ioapic0 at mainbus0 apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 3 (PCI4)
acpiprt1 at acpi0: bus 2 (PCI2)
acpiprt2 at acpi0: bus -1 (PCI3)
acpiprt3 at acpi0: bus 1 (PCI1)
acpiprt4 at acpi0: bus -1 (PCI5)
acpiprt5 at acpi0: bus -1 (PCI6)
acpiprt6 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpibtn0 at acpi0: VBTN
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x0a
ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x0a: apic 8 int 16
(irq 11)
pci1 at ppb0 bus 1
vga1 at pci0 dev 2 function 0 "Intel 82G33 Video" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: apic 8 int 16 (irq 11)
drm0 at inteldrm0
"Intel 82G33 Video" rev 0x0a at pci0 dev 2 function 1 not configured
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 8 int
16 (irq 11)
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5784" rev 0x10, BCM5784 A1
(0x5784100): apic 8 int 16 (irq 11), address 00:23:ae:83:5e:07
brgphy0 at bge0 phy 1: BCM5784 10/100/1000baseT PHY, rev. 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int
21 (irq 10)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int
22 (irq 9)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int
18 (irq 5)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int
23 (irq 3)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int
21 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SCd
(0x1800), apic 8 int 16 (irq 11), address 00:0a:cd:18:10:df
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
re1 at pci3 dev 2 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SCd
(0x1800), apic 8 int 18 (irq 5), address 00:0a:cd:18:06:01
rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 2
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 ignored (disabled)
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 8 int 20 (irq 9) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST380815AS>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ATAPI, iHDS118 4, FL04> ATAPI 5/cdrom
removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 8
int 17 (irq 5)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-6400CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
Automatic boot in progress: starting file system checks.
/dev/rwd0a: file system is clean; not checking
/dev/rwd0g: file system is clean; not checking
/dev/rwd0e: file system is clean; not checking
/dev/rwd0f: file system is clean; not checking
/dev/rwd0d: file system is clean; not checking
setting tty flags
kbd: keyboard mapping set to us
pf enabled
starting network
starting system logger
starting isakmpd
starting initial daemons:.
savecore: no core dump
checking quotas: done.
building ps databases: kvm dev.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sendmail inetd sshd.
starting local daemons:.
standard daemons: cron.
Tue Jun 23 19:19:32 CDT 2009
OpenBSD/amd64 (wayfarer.autocity.local) (tty00)
login:
--
Jason Girard
ja...@autocityclassic.com
