STeve Andre' wrote:
I just found out that my ppp link via my T-Mobile
phone doesn't work. Of course I found this out while
being outside without any other net connection.
I haven't changed anything other than compiling
stuff. This is a -current system on a Thinkpad W500
compiled on June 26th. This has worked for years.
What happens is that upon firing ppp up manually
I get the message "Working in interactive mode" which
I have never gotten before. So far I haven't been able
to do anything with it other than a ^C. I tried an
identical phone with my SIM; same results.
Any ideas?
Thanks, STeve Andre'
Dmesg, copy of ppp.conf and usbdevs output below.
Hello,
Same here, I'm using a W500 too, I can't connect anymore:
/var/log/daemon output:
Jun 30 17:15:24 406334g pppd[8832]: pppd 2.3.5 started by dda, uid 1000
Jun 30 17:15:28 406334g pppd[8832]: Serial connection established.
Jun 30 17:15:29 406334g pppd[8832]: Using interface ppp0
Jun 30 17:15:29 406334g pppd[8832]: Connect: ppp0 <--> /dev/cuaU0
Jun 30 17:15:32 406334g pppd[8832]: Modem hangup
Jun 30 17:15:32 406334g pppd[8832]: Connection terminated.
/var/log/chat output:
Jun 30 17:15:25 406334g chat[4387]: timeout set to 120 seconds
Jun 30 17:15:25 406334g chat[4387]: abort on (BUSY)
Jun 30 17:15:25 406334g chat[4387]: abort on (ERROR)
Jun 30 17:15:25 406334g chat[4387]: abort on (NO CARRIER)
Jun 30 17:15:25 406334g chat[4387]: abort on (VOICE)
Jun 30 17:15:25 406334g chat[4387]: abort on (NO DIALTONE)
Jun 30 17:15:25 406334g chat[4387]: send (ATE1^M)
Jun 30 17:15:26 406334g chat[4387]: expect (OK)
Jun 30 17:15:26 406334g chat[4387]: ATE1^M^M
Jun 30 17:15:26 406334g chat[4387]: OK
Jun 30 17:15:26 406334g chat[4387]: -- got it
Jun 30 17:15:26 406334g chat[4387]: send (AT+CGDCONT=1,"IP","web.pt.lu"^M)
Jun 30 17:15:26 406334g chat[4387]: expect (OK)
Jun 30 17:15:26 406334g chat[4387]: ^M
Jun 30 17:15:26 406334g chat[4387]: AT+CGDCONT=1,"IP","web.pt.lu"^M^M
Jun 30 17:15:26 406334g chat[4387]: OK
Jun 30 17:15:26 406334g chat[4387]: -- got it
Jun 30 17:15:26 406334g chat[4387]: send (ATD*99***1#^M)
Jun 30 17:15:27 406334g chat[4387]: expect (CONNECT)
Jun 30 17:15:27 406334g chat[4387]: ^M
Jun 30 17:15:28 406334g chat[4387]: atd*99***1#^m~^...@!}!}!}
}8}...@#}(}"}'}"}"}&} } } } }%}&^ZD)R^W~^M
Jun 30 17:15:28 406334g chat[4387]: CONNECT
Jun 30 17:15:28 406334g chat[4387]: -- got it
Jun 30 17:15:28 406334g chat[4387]: send ()
I'm using pppd with another provider LUXGSM, but I can't connect anymore
but it used to work perfectly.
I would really appreciate some help too.
Thanks a lot!
Didier
Here is my dmesg, scripts and usbdevs output:
OpenBSD 4.5-current (GENERIC.MP) #15: Thu Jun 18 09:58:42 MDT 2009
t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3174764544 (3027MB)
avail mem = 3066490880 (2924MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (80 entries)
bios0: vendor LENOVO version "6FET70WW (3.00 )" date 04/17/2009
bios0: LENOVO 406334G
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT
TCPA SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4)
EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3)
EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz, 2793.36 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz, 2793.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu1: 6MB 64b/line 16-way L2 cache
ioapic0 at mainbus0 apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus 4 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
acpiprt6 at acpi0: bus 13 (EXP4)
acpiprt7 at acpi0: bus 21 (PCI1)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4620" serial 3828 type LION oem
"Panasonic"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
cpu0: Enhanced SpeedStep 2793 MHz: speeds: 2801, 2800, 2133, 1600, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 11)
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
"Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel GM45 PT IDER" rev 0x07: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 1 int 18 (irq 11) for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel GM45 AMT SOL" rev 0x07 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1
int 20 (irq 11), address 00:21:86:ff:1f:5c
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
20 (irq 11)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
21 (irq 11)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
22 (irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
23 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic
1 int 17 (irq 11)
azalia0: RIRB time out
azalia0: codecs: Conexant CX20561, Conexant/0x2c06, using Conexant CX20561
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int
20 (irq 11)
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int
21 (irq 11)
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: apic 1
int 17 (irq 11), MIMO 3T3R, MoW, address 00:21:6a:0d:2f:0a
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 1 int
22 (irq 11)
pci3 at ppb2 bus 4
"Intel Turbo Memory" rev 0x11 at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int
23 (irq 11)
pci4 at ppb3 bus 5
ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int
20 (irq 11)
pci5 at ppb4 bus 13
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
16 (irq 11)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
17 (irq 11)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
18 (irq 11)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
19 (irq 11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 21
cbb0 at pci6 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int
16 (irq 11)
"Ricoh 5C832 Firewire" rev 0x04 at pci6 dev 0 function 1 not configured
sdhc0 at pci6 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 int
18 (irq 11)
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x11 at pci6 dev 0 function 3 not configured
"Ricoh 5C592 Memory Stick" rev 0x11 at pci6 dev 0 function 4 not configured
"Ricoh 5C852 xD" rev 0x11 at pci6 dev 0 function 5 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x10, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int
16 (irq 11), AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG MMDOE56G, VBM1> SCSI3
0/direct fixed
sd0: 244198MB, 512 bytes/sec, 500118192 sec total
cd0 at scsibus0 targ 1 lun 0: <Optiarc, DVD RW AD-7910S, 1.D0> ATAPI
5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1
int 23 (irq 11)
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony Electronics
Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2
video0 at uvideo0
ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
ugen1 at uhub2 port 2 "Gemplus GemPC Express" rev 2.00/1.00 addr 2
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
$ cat /etc/ppp/peers/ept
#debug
cuaU0
460800
0.0.0.0:10.64.64.64
netmask 255.255.255.255
ipcp-accept-local
ipcp-accept-remote
crtscts
persist
#disable stuff
deflate 0
refuse-pap
refuse-chap
noauth
noipdefault
nopcomp
novj
novjccomp
defaultroute
connect '/usr/sbin/chat -v -f /etc/ppp/peers/chat/ept.chat'
$ cat /etc/ppp/peers/chat/ept.chat
TIMEOUT 120
ABORT "BUSY"
ABORT "ERROR"
ABORT "NO CARRIER"
ABORT "VOICE"
ABORT "NO DIALTONE"
#enable echo
"" "ATE1"
#switch modem on
"" AT+CFUN=1
# APN
OK AT+CGDCONT=1,"IP","web.pt.lu"
# dial
OK "ATD*99***1#"
CONNECT \c
$ usbdevs -v
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 addr 2: high speed, power 100 mA, config 1, product
0x4807(0x4807), Chicony Electronics Co., Ltd.(0x17ef), rev 31.34
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 addr 2: high speed, power 20 mA, config 1, Ericsson F3507g
Mobile Broadband Minicard Composite Device(0x1900), Ericsson(0x0bdb),
rev 0.00, iSerialNumber 3541430212806980
port 5 powered
port 6 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 addr 2: full speed, power 100 mA, config 1, GemPC
Express(0x34ec), Gemplus(0x08e6), rev 1.00
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: full speed, power 100 mA, config 1, Fingerprint
Sensor(0x2810), AuthenTec(0x08ff), rev 17.03
port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb5:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
