On Wed, Jul 8, 2009 at 5:55 AM, Jan Stary<h...@stare.cz> wrote: > Before I buy http://download.asm.cz/inshop/prod/barebone/3V700A.pdf > I want to make sure that the components are supported by OpenBSD, > where "supported" means it works under 4.5 or current. > Both success stories and failure stories are welcome. > > The CPU is VIA Eden V4, which I understand is a variant of C3/C7, > and is therefore supported, right?
I have working C3 and C7 machines. > Now, http://openbsd.org/i386.html#hardware does not specifically mention > the VIA CN700 chipset - is someone using it successfully? below is a dmesg of a C7 on a CN700 > The VT8237 is listed as supported - will also VT8237R be supported? > > Lastly, the VIA VT1708/A HD Audio is > "compliant with the Intel High Definition Audio Rev. 1.0 specification" > as per http://www.via.com.tw/en/products/audio/codecs/vt1708/index.jsp > - is it supported by azalia(4) then? Don't worry about the wd0 errors - i'm using a not-very-smart cf card in an adapter and it doesn't like DMA. I don't reboot this machine often enough to care. OpenBSD 4.6 (GENERIC) #39: Wed Jul 1 13:34:04 MDT 2009 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: VIA C7-D Processor 1500MHz ("CentaurHauls" 686-class) 1.51 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXS R,SSE,SSE2,TM,SBF,SSE3,xTPR real mem = 1005023232 (958MB) avail mem = 962871296 (918MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 01/15/08, BIOS32 rev. 0 @ 0xfa130, SMBIOS rev. 2.3 @ 0xf0000 (34 entries) bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 01/15/2008 apm0 at bios0: Power Management spec V1.2 (slowidle) apm0: AC on, battery charge unknown acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 2.1 @ 0xf0000/0xc964 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc890/208 (11 entries) pcibios0: bad IRQ table checksum pcibios0: PCI BIOS has 11 Interrupt Routing table entries pcibios0: PCI Exclusive IRQs: 5 10 11 pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8237 ISA" rev 0x00) pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc0000/0x10000 cpu0 at mainbus0: (uniprocessor) cpu0: RNG AES AES-CTR SHA1 SHA256 RSA pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00 viaagp0 at pchb0: v3 agp0 at viaagp0: aperture at 0xe8000000, size 0x10000000 pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00 pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00 pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00 pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00 pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00 ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) "VIA VT6306 FireWire" rev 0x80 at pci0 dev 10 function 0 not configured pciide0 at pci0 dev 15 function 0 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <CF CARD> wd0: 1-sector PIO, LBA, 3823MB, 7831152 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 pciide0: channel 1 ignored (disabled) uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 11 uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 11 uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11 uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11 ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 10 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1 viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00 iic0 at viapm0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 10 ac97: codec id 0x56494170 (VIA Technologies <70>) ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D audio0 at auvia0 vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: irq 11, address 00:30:18:a6:0b:59 ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI 0x004063, model 0x0032 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1 isa0 at mainbus0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: probed fifo depth: 15 bytes com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo com1: probed fifo depth: 0 bytes pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 fins0 at isa0 port 0x4e/2 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 biomask ffe5 netmask ffe5 ttymask ffff mtrr: Pentium Pro MTRR support ugen0 at uhub4 port 2 "ITUNER INC USB-LCD-20x2" rev 2.00/0.01 addr 2 softraid0 at root wd0(pciide0:0:0): timeout type: ata c_bcount: 512 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21 wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying wd0(pciide0:0:0): timeout type: ata c_bcount: 512 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21 wd0: transfer error, downgrading to Ultra-DMA mode 3 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 3 wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying wd0(pciide0:0:0): timeout type: ata c_bcount: 512 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21 wd0: transfer error, downgrading to Ultra-DMA mode 2 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying wd0(pciide0:0:0): timeout type: ata c_bcount: 512 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21 wd0: transfer error, downgrading to Ultra-DMA mode 1 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 1 wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying wd0: soft error (corrected) wd0(pciide0:0:0): timeout type: ata c_bcount: 512 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21 wd0: transfer error, downgrading to Ultra-DMA mode 0 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 0 wd0c: device timeout reading fsbn 64 (wd0 bn 64; cn 0 tn 1 sn 1), retrying wd0(pciide0:0:0): timeout type: ata c_bcount: 512 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21 wd0: transfer error, downgrading to DMA mode 2 wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 wd0c: device timeout reading fsbn 64 (wd0 bn 64; cn 0 tn 1 sn 1), retrying wd0(pciide0:0:0): timeout type: ata c_bcount: 512 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21 wd0: transfer error, downgrading to PIO mode 4 wd0(pciide0:0:0): using PIO mode 4 wd0c: device timeout reading fsbn 64 (wd0 bn 64; cn 0 tn 1 sn 1), retrying wd0: soft error (corrected) root on wd0a swap on wd0b dump on wd0b > > Thank you for your time. > > Jan > > -- GDB has a 'break' feature; why doesn't it have 'fix' too?
