Hello List, I upgraded my workstation from 4.4 to 4.5 and i lost the 1280x1024 resolution in X. I had the i810(4) driver which has been removed/replaced with the intel(4) driver. Which other driver should i try to achieve same resolution? It works with 1024x768 at most
This is dmesg: OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC RTC BIOS diagnostic error 80<clock_battery> cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CNXT-ID,CX16,xTPR real mem = 1061588992 (1012MB) avail mem = 1018200064 (971MB) RTC BIOS diagnostic error 80<clock_battery> mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 08/28/07, SMBIOS rev. 2.4 @ 0xe44f0 (27 entries) bios0: vendor Intel Corp. version "NL94510J.86A.0017.2007.0828.1137" date 08/28/2007 bios0: Intel Corporation D945GCNL acpi0 at bios0: rev 0 acpi0: tables DSDT FACP APIC WDDT MCFG ASF! HPET SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices SLPB(S4) P32_(S4) PS2M(S4) PS2K(S4) UAR1(S4) UAR2(S4) PEG0(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) AC9M(S4) AZAL(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 199MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 5 (P32_) acpiprt2 at acpi0: bus -1 (PEG0) acpiprt3 at acpi0: bus 1 (PEX0) acpiprt4 at acpi0: bus 2 (PEX1) acpiprt5 at acpi0: bus 3 (PEX2) acpiprt6 at acpi0: bus 4 (PEX3) acpiprt7 at acpi0: bus -1 (PEX4) acpiprt8 at acpi0: bus -1 (PEX5) acpicpu0 at acpi0: FVS, 3000, 2400 MHz acpibtn0 at acpi0: SLPB bios0: ROM list: 0xc0000/0xae00! pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02 vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0x40000000, size 0x10000000 inteldrm0 at vga1: apic 2 int 16 (irq 11) drm0 at inteldrm0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int 17 (irq 255) pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 2 int 16 (irq 255) pci2 at ppb1 bus 2 re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 (0x3800), apic 2 int 17 (irq 9), address 00:1c:c0:0e:24:4e rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: apic 2 int 18 (irq 255) pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: apic 2 int 19 (irq 255) pci4 at ppb3 bus 4 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23 (irq 10) uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 19 (irq 11) uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18 (irq 9) uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 16 (irq 11) ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23 (irq 10) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1 pci5 at ppb4 bus 5 ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <WDC WD800BB-00JHC0> wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors wd1 at pciide0 channel 0 drive 1: <WDC WD800BB-00FRA0> wd1: 16-sector PIO, LBA48, 76319MB, 156301488 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 2 int 19 (irq 11) for native-PCI interrupt ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int 19 (irq 11) iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support softraid0 at root root on wd0a swap on wd0b dump on wd0b -- Marcos Laufer * marcos <mailto:mar...@ipversion4.com>@ipversion4.com <mailto:mar...@ipversion4.com> CTO Ipversion4.com http://www.ipversion4.com <http://www.ipversion4.com/> ( 0800-444-HOSTING Rodriguez Peqa 468 1 C