Hi all, Jacob, I have noticed this problem off and on, where the audio volume is stuck at max (or close to it) and I am unable to adjust the volume until I reboot. This doesn't happen often, and with the current snapshot I've been running, for a month now, it is the first time it has happened; I had thought whatever the glitch was, it had got fixed, but I guess not quite :)
The ibook is right now in this condition, and if there is anything you want me to try and send you info while in this state let me know. I'll have to shutoff the ibook in the morning when I leave for work (it travels with me); that's in about nine or so hours from now. --patrick $ dmesg [ using 437464 bytes of bsd ELF symbol table ] console out [ATY,Via_A]console in [keyboard] USB and ADB found, using ADB using parent ATY,ViaParent:: memaddr 98000000 size 8000000, : consaddr 9c008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: width 1024 linebytes 1024 height 768 depth 8 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2009 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 4.6 (GENERIC) #38: Fri Jul 3 18:40:45 MDT 2009 dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC real mem = 671088640 (640MB) avail mem = 636502016 (607MB) mainbus0 at root: model PowerBook6,3 cpu0 at mainbus0: 7455 (Revision 0x303): 799 MHz: 256KB L2 cache mem0 at mainbus0 spdmem0 at mem0: no EEPROM found spdmem1 at mem0: 512MB DDR SDRAM non-parity PC2100CL2.5 memc0 at mainbus0: uni-n "hw-clock" at memc0 not configured kiic0 at memc0 offset 0xf8001000 iic0 at kiic0 adt0 at iic0 addr 0xae: adt7467 rev 0x71 "cy28512" at iic0 addr 0xe9 not configured mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff pci0 at mpcpcibr0 bus 0 pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00 vgafb0 at pci0 dev 16 function 0 "ATI Radeon Mobility 9200" rev 0x01, mmio wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x5 pci1 at mpcpcibr1 bus 0 pchb1 at pci1 dev 11 function 0 "Apple UniNorth PCI" rev 0x00 bwi0 at pci1 dev 18 function 0 "Broadcom BCM4306" rev 0x03: irq 52, address 00:0d:93:84:04:88 macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00 openpic0 at macobio0 offset 0x40000: version 0x4614 little endian macgpio0 at macobio0 offset 0x50 macgpio1 at macgpio0 offset 0x9 irq 47 "programmer-switch" at macgpio0 offset 0x11 not configured "gpio4" at macgpio0 offset 0x1e not configured "frequency-gpio" at macgpio0 offset 0x1a not configured "voltage-gpio" at macgpio0 offset 0x1b not configured "slewing-done" at macgpio0 offset 0x12 not configured "gpio5" at macgpio0 offset 0x6f not configured "gpio6" at macgpio0 offset 0x70 not configured "gpio11" at macgpio0 offset 0x75 not configured "extint-gpio15" at macgpio0 offset 0x67 not configured "escc-legacy" at macobio0 offset 0x12000 not configured zsc0 at macobio0 offset 0x13000: irq 22,23 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 snapper0 at macobio0 offset 0x10000: irq 30,1,2 "timer" at macobio0 offset 0x15000 not configured adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 3 targets akbd0 at adb0 addr 2: PowerBook G4 keyboard (Inverted T) wskbd0 at akbd0: console keyboard, using wsdisplay0 ams0 at adb0 addr 3: EMP trackpad <tpad> 4-button, 400 dpi wsmouse0 at ams0 mux 0 abtn0 at adb0 addr 7: brightness/volume/eject buttons apm0 at adb0: battery flags 0x4, 99% charged piic0 at adb0 iic1 at piic0 "battery" at macobio0 offset 0x0 not configured "backlight" at macobio0 offset 0xf300 not configured kiic1 at macobio0 offset 0x18000 iic2 at kiic1 wdc0 at macobio0 offset 0x20000 irq 24: DMA atapiscsi0 at wdc0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <QSI, CD-ROM TCR-241, WL15> ATAPI 5/cdrom removable cd0(wdc0:0:0): using BIOS timings, DMA mode 2 audio0 at snapper0 ohci0 at pci1 dev 24 function 0 "Apple Intrepid USB" rev 0x00: irq 0, version 1.0, legacy support ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: irq 0, version 1.0, legacy support ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, version 1.0, legacy support ohci3 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0 ohci4 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0 ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1 usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1 usb2 at ohci1: USB revision 1.0 uhub2 at usb2 "Apple OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci2: USB revision 1.0 uhub3 at usb3 "Apple OHCI root hub" rev 1.00/1.00 addr 1 usb4 at ohci3: USB revision 1.0 uhub4 at usb4 "NEC OHCI root hub" rev 1.00/1.00 addr 1 usb5 at ohci4: USB revision 1.0 uhub5 at usb5 "NEC OHCI root hub" rev 1.00/1.00 addr 1 mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x6 pci2 at mpcpcibr2 bus 0 pchb2 at pci2 dev 11 function 0 "Apple UniNorth PCI" rev 0x00 kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00 wdc1 at kauaiata0 irq 39: DMA wd0 at wdc1 channel 0 drive 0: <SAMSUNG HM100JC> wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 "Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address 00:0a:95:b5:3a:e2 bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4 uhub6 at uhub5 port 1 "ALCOR Generic USB Hub" rev 1.10/3.14 addr 2 uhidev0 at uhub6 port 1 configuration 1 interface 0 "Microsoft Corporation Microsoft \M-. Laser Mouse 6000" rev 2.00/1.01 addr 3 uhidev0: iclass 3/1 ums0 at uhidev0: 5 buttons, Z dir wsmouse1 at ums0 mux 0 uhidev1 at uhub6 port 2 configuration 1 interface 0 "Rextron, Inc. USB K/M for SUN" rev 1.10/1.01 addr 4 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 modifier keys, 6 key codes, country code 33 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev2 at uhub6 port 2 configuration 1 interface 1 "Rextron, Inc. USB K/M for SUN" rev 1.10/1.01 addr 4 uhidev2: iclass 3/1 ums1 at uhidev2: 3 buttons, Z dir wsmouse2 at ums1 mux 0 softraid0 at root bootpath: /p...@f4000000/at...@d/d...@0:/bsd root on wd0a swap on wd0b dump on wd0b $ mixerctl -v outputs.select=hp { spkr hp } outputs.master=10,10 volume record.source=line { mic line } record.record=0,0 volume outputs.bass=128 outputs.treble=128 $ audioctl name=SNAPPER version= config=snapper encodings=slinear:16,slinear_be:16,slinear_le:16*,ulinear_be:16*,ulinear_le:16*,mulaw:8*,alaw:8*,slinear:8*,ulinear:8* properties=full_duplex full_duplex=1 fullduplex=1 blocksize=8192 hiwat=2 lowat=1 output_muted=0 monitor_gain=0 mode=play,record play.rate=44100 play.channels=2 play.precision=16 play.encoding=slinear_be play.gain=10 play.balance=32 play.port=0x2 play.avail_ports=0x3 play.seek=0 play.samples=0 play.eof=0 play.pause=0 play.error=0 play.waiting=0 play.open=1 play.active=0 play.buffer_size=65536 play.block_size=8192 play.errors=0 record.rate=44100 record.channels=2 record.precision=16 record.encoding=slinear_be record.gain=0 record.balance=32 record.port=0x2 record.avail_ports=0x3 record.seek=0 record.samples=0 record.eof=0 record.pause=0 record.error=0 record.waiting=0 record.open=1 record.active=0 record.buffer_size=65536 record.block_size=8192 record.errors=0 $ env AUCAT_DEBUG=3 aucat -l output attached (I know misc@ doesn't allow attachments, that's why I am Cc-ing Jacob, hope he doesn't mind). [demime 1.01d removed an attachment of type application/x-gzip which had a name of aucat-debug-level3.out.gz]