No one, really?
On Tue, 18 Aug 2009, Antoine Jacoutot wrote:
> Hi.
>
> For five days in a row now I've been having the same issue. 2 days ago I
> upgraded to a never snapshot in case it would fix my problem without
> luck.
>
> This is @home on a DSL lines. OpenBSD gateway is connected to the modem
> with an axe(4), default setup, nothing fancy running...
> Every night I'm doing an rsnapshot backup off site of a small amount of
> data (couple of Gb). This setup has been running for about a year.
>
> Since 5 days, the connexion hangs during that backup, everytime.
> My logs are empty and the only way to get net access again is to:
> # pfctl -d ; sleep 2 ; pfctl -e
>
> pyr@ and I couldn't find anything obviously wrong. I'm not sure where I
> should start to debug this and would appreciate any hint.
>
> Thanks.
>
>
> INFO:
> Status: Enabled for 1 days 00:38:41 Debug: Urgent
>
> State Table Total Rate
> current entries 77
> searches 9982542 112.5/s
> inserts 179453 2.0/s
> removals 179376 2.0/s
> Counters
> match 180540 2.0/s
> bad-offset 0 0.0/s
> fragment 0 0.0/s
> short 0 0.0/s
> normalize 0 0.0/s
> memory 0 0.0/s
> bad-timestamp 0 0.0/s
> congestion 0 0.0/s
> ip-option 0 0.0/s
> proto-cksum 0 0.0/s
> state-mismatch 72 0.0/s
> state-insert 1 0.0/s
> state-limit 0 0.0/s
> src-limit 10 0.0/s
> synproxy 0 0.0/s
>
> TIMEOUTS:
> tcp.first 120s
> tcp.opening 30s
> tcp.established 86400s
> tcp.closing 900s
> tcp.finwait 45s
> tcp.closed 90s
> tcp.tsdiff 30s
> udp.first 60s
> udp.single 30s
> udp.multiple 60s
> icmp.first 20s
> icmp.error 10s
> other.first 60s
> other.single 30s
> other.multiple 60s
> frag 30s
> interval 10s
> adaptive.start 6000 states
> adaptive.end 12000 states
> src.track 0s
>
> LIMITS:
> states hard limit 10000
> src-nodes hard limit 10000
> frags hard limit 5000
> tables hard limit 1000
> table-entries hard limit 200000
>
>
> OpenBSD 4.6-current (GENERIC) #105: Mon Aug 10 18:02:36 MDT 2009
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: VIA Esther processor 1000MHz ("CentaurHauls" 686-class) 1 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,SSE3,EST,TM2
> real mem = 469254144 (447MB)
> avail mem = 445857792 (425MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 06/16/06, BIOS32 rev. 0 @ 0xfa960,
> SMBIOS rev. 2.3 @ 0xf0800 (26 entries)
> bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 06/16/2006
> apm0 at bios0: Power Management spec V1.2 (slowidle)
> apm0: AC on, battery charge unknown
> acpi at bios0 function 0x0 not configured
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdd14
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdc60/176 (9 entries)
> pcibios0: bad IRQ table checksum
> pcibios0: PCI BIOS has 9 Interrupt Routing table entries
> pcibios0: PCI Exclusive IRQs: 5 10 11
> pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8237 ISA" rev 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0xf200 0xd0000/0x8000! 0xd8000/0x4400!
> cpu0 at mainbus0: (uniprocessor)
> cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
> cpu0: unknown Enhanced SpeedStep CPU, msr 0x08100a1308000a13
> cpu0: using only highest and lowest power states
> cpu0: Enhanced SpeedStep 998 MHz: speeds: 1000, 800 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00
> viaagp0 at pchb0: v3
> agp0 at viaagp0: aperture at 0xe8000000, size 0x10000000
> pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00
> pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00
> pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00
> pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00
> pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00
> ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
> pciide0: using irq 11 for native-PCI interrupt
> wd0 at pciide0 channel 0 drive 0: <SAMSUNG HD160HJ>
> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
> channel 0 configured to compatibility, channel 1 configured to compatibility
> pciide1: channel 0 disabled (no drives)
> pciide1: channel 1 disabled (no drives)
> uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 10
> uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 10
> uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11
> uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11
> ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 5
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
> viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
> iic0 at viapm0
> spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-4200CL5
> auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 5
> ac97: codec id 0x56494182 (VIA Technologies <82>)
> ac97: codec features 18 bit DAC, 18 bit ADC, No 3D Stereo
> audio0 at auvia0
> vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: irq 10, address
> 00:40:63:ee:19:60
> ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI
> 0x004063, model 0x0032
> puc0 at pci0 dev 20 function 0 "NetMos Nm9835" rev 0x01: ports: 2 com, 1 lpt
> com3 at puc0 port 0 irq 11: ns16550a, 16 byte fifo
> com4 at puc0 port 1 irq 11: ns16550a, 16 byte fifo
> lpt3 at puc0 port 2 irq 11
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at mainbus0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> viasio0 at isa0 port 0x2e/2: VT1211 rev 0x02, HM, WDG not activated
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> biomask ff6d netmask ff6d ttymask ffff
> mtrr: Pentium Pro MTRR support
> axe0 at uhub0 port 4 configuration 1 interface 0 "Apple Computer Ethernet
> A1277" rev 2.00/0.01 addr 2
> axe0: AX88772, address 00:1f:f3:8b:3b:3c
> ukphy1 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI
> 0x000ec6, model 0x0006
> umass0 at uhub0 port 8 configuration 1 interface 0 "Philips Philips Harddisk"
> rev 2.00/0.00 addr 3
> umass0: using SCSI over Bulk-Only
> scsibus0 at umass0: 2 targets, initiator 0
> sd0 at scsibus0 targ 1 lun 0: <Hitachi, HDT725050VLAT80, V56O> SCSI0 0/direct
> fixed
> sd0: 476940MB, 512 bytes/sec, 976773168 sec total
> uscanner0 at uhub3 port 2 configuration 1 interface 0 "EPSON USB MFP" rev
> 1.10/1.00 addr 2
> ulpt0 at uhub3 port 2 configuration 1 interface 1 "EPSON USB MFP" rev
> 1.10/1.00 addr 2
> ulpt0: using bi-directional mode
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
>
>
>
--
Antoine
