Hi all!
First of all, I'm sorry about my English.
I have a problem with booting OpenBSD 4.5 on my computer. It has internal
and external video adapters. With only internal one the system boots
without any problem. dmesg output (using only internal card) is attached
to the message. When I plug an external video card OpenBSD refuses to
boot. It doesn't matter what a video adapter I use (I tried with three
cards). The system stops booting with the following:
...
...
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17
lm1 at wbsio0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask ef65 netmask ef65 ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
Keyboard isn't working after that - the system is froze.
OpenBSD is the only system on PC. Windows (r) works fine on this
computer. I need to use an external adapter.
What have I tried? I've tried to boot with turned on or off following
options in BIOS (I tried various combinations):
- Assign IRQ to VGA;
- Video BIOS cacheable;
- Enable Internal Video;
- AGP Data Transfer Rate;
- Init Display First;
- PCI/VGA Palette Snoop.
Also I tried to boot with minimal hardware (only M/B, cpu, memory, HDD,
video card). I looked boot(1) but found nothing useful.
My hardware:
Motherboard Abit SL30 with the newest BIOS update, CPU Pentium 3 733,
128Mb RAM. I'm sure that the hardware is good. It works fine.
Thank you!
OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 549 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 132673536 (126MB)
avail mem = 119992320 (114MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/02/02, BIOS32 rev. 0 @ 0xfb0d0, SMBIOS
rev. 2.2 @ 0xf0800 (35 entries)
bios0: vendor Award Software International, Inc. version "6.00 PG" date
04/02/2002
bios0: ABIT i815E-W83627HF
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdef0/128 (6 entries)
pcibios0: PCI Exclusive IRQs: 5 9 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82815 Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
skc0 at pci1 dev 0 function 0 "D-Link Systems DGE-530T B1" rev 0x11, Yukon Lite
(0x9): irq 11
sk0 at skc0 port A: address 00:15:e9:41:4d:04
eephy0 at sk0 phy 0: 88E1011 Gigabit PHY, rev. 5
rl0 at pci1 dev 1 function 0 "D-Link Systems 530TX+" rev 0x10: irq 5, address
00:50:ba:4c:82:f9
rlphy0 at rl0 phy 0: RTL internal PHY
"Philips SAA7133 TV" rev 0xd1 at pci1 dev 2 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x02: 24-bit timer
at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x02: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST340014A>
wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide0 channel 1 drive 0: <ST3500630A>
wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7170A, 1.02> ATAPI 5/cdrom
removable
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 4
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x02: irq 11
ichiic0 at pci0 dev 31 function 3 "Intel 82801BA SMBus" rev 0x02: irq 5
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 64MB SDRAM non-parity PC100CL3
spdmem1 at iic0 addr 0x51: 64MB SDRAM non-parity PC100CL3
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x02: irq 11
auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97" rev 0x02: irq 5, ICH2 AC97
ac97: codec id 0x414c4710 (Avance Logic ALC200)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17
lm1 at wbsio0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask ef65 netmask ef65 ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
