Hello:
I am just wondering if anyone has any idea about this.
I originally installed 4.4 on a Sony laptop, all was good.
With the 4.5 release, the built in nic stopped working. I tried multiple
snapshots, and, now, the current 4.6 release.
I was wondering if there was anything I could do to make it work?
Please, I am not "demanding" anything. I don't have the anywhere near the
knowledge to figure this out, and I just want to know if there is anything I
can do to make it work for me?
If not, is there any idea if this will work again in the future? (again, not
a demand, I just would like to know if there are any plans to get it working
- if not, I understand that, and it's not a problem.)
Thanks for your time, and all of it.
Here are the dmesg from the 4.4, 4.5, and 4.6 releases (in that order):
----------
4.4 dmesg:
OpenBSD 4.4 (RAMDISK_CD) #857: Tue Aug 12 17:31:49 MDT 2008
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz ("GenuineIntel"
686-class) 1.99 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS
,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 267415552 (255MB)
avail mem = 251977728 (240MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/22/03, BIOS32 rev. 0 @ 0xfd891,
SMBIOS rev. 2.31 @ 0xd8010 (15 entries)
bios0: vendor Phoenix Technologies LTD version "R0202B3" date 04/22/03
bios0: Sony Corporation PCG-V505BC(UC)
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd890/0x770
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf50/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd8000/0x4000! 0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6 LY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
cbb0 at pci2 dev 5 function 0 "Ricoh 5C475 CardBus" rev 0xb8: irq 3
"Ricoh 5C551 Firewire" rev 0x00 at pci2 dev 5 function 1 not configured
ohci0 at pci2 dev 7 function 0 "NEC USB" rev 0x43: irq 9, version 1.0,
legacy support
ohci1 at pci2 dev 7 function 1 "NEC USB" rev 0x43: irq 10, version 1.0,
legacy support
ehci0 at pci2 dev 7 function 2 "NEC USB" rev 0x04: irq 3
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x42, i82562: irq 10,
address 08:00:46:ad:9e:c5
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02: 24-bit
timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N040ATMR04-0>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA745 DVD/CDRW, 1.05> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801CA/CAM SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
"Intel 82801CA/CAM AC97" rev 0x02 at pci0 dev 31 function 5 not configured
"Intel 82801CA/CAM Modem" rev 0x02 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask fffd netmask fffd ttymask ffff
rd0: fixed, 3800 blocks
umass0 at uhub0 port 1 configuration 1 interface 0 "PNY USB 2.0 FD" rev
2.00/2.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <PNY, USB 2.0 FD, 8.02> SCSI0 0/direct
removable
sd0: 3835MB, 489 cyl, 255 head, 63 sec, 512 bytes/sec, 7856127 sec total
umass1 at uhub2 port 2 configuration 1 interface 0 "Sony USB Memory Stick
Slot" rev 1.10/1.90 addr 2
umass1: using ATAPI over CBI with CCI
scsibus2 at umass1: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Sony, MSC-U03, 2.00> ATAPI 0/direct removable
sd1: drive offline
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
--------------------
4.5 dmesg:
OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz ("GenuineIntel"
686-class) 1.99 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS
,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 266891264 (254MB)
avail mem = 249774080 (238MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/22/03, BIOS32 rev. 0 @ 0xfd891,
SMBIOS rev. 2.31 @ 0xd8010 (15 entries)
bios0: vendor Phoenix Technologies LTD version "R0202B3" date 04/22/03
bios0: Sony Corporation PCG-V505BC(UC)
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP BOOT SSDT SSDT
acpi0: wakeup devices PWRB(S5) CRD0(S3) LAN_(S3) USB1(S3) USB2(S3) USB3(S3)
EC0_(S5) MODE(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (HUB_)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, FVS, 2000, 1200 MHz
acpitz0 at acpi0: critical temperature 90 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
acpibat0 at acpi0: BAT1 type LION oem "Sony Corp."
acpiac0 at acpi0: AC unit online
bios0: ROM list: 0xc0000/0x10000 0xd8000/0x4000! 0xdc000/0x4000!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xec000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: irq 9
drm0 at radeondrm0
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
cbb0 at pci2 dev 5 function 0 "Ricoh 5C475 CardBus" rev 0xb8: couldn't map
interrupt
"Ricoh 5C551 Firewire" rev 0x00 at pci2 dev 5 function 1 not configured
ohci0 at pci2 dev 7 function 0 "NEC USB" rev 0x43: irq 9, version 1.0,
legacy support
ohci1 at pci2 dev 7 function 1 "NEC USB" rev 0x43: couldn't map interrupt
ehci0 at pci2 dev 7 function 2 "NEC USB" rev 0x04: couldn't map interrupt
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x42: couldn't map
interrupt
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "NEC OHCI root hub" rev 1.00/1.00 addr 1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N040ATMR04-0>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA745 DVD/CDRW, 1.05> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x02:
polling
iic0 at ichiic0
spdmem0 at iic0 addr 0x54: 256MB DDR SDRAM non-parity PC2300CL2.5
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02"Intel
82801CA/CAM Modem" rev 0x02 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/16384
pcic0 controller 0: <Intel 82365SL rev 1> has socket A only
pcmcia0 at pcic0 controller 0 socket 0
pcic0: irq 3, polling enabled
biomask eff5 netmask eff5 ttymask ffff
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 1 configuration 1 interface 0 "PNY USB 2.0 FD" rev
2.00/2.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <PNY, USB 2.0 FD, 8.02> SCSI0 0/direct
removable
sd0: 3835MB, 512 bytes/sec, 7856127 sec total
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
---------------
4.6 dmesg:
OpenBSD 4.6 (RAMDISK_CD) #53: Thu Jul 9 21:41:35 MDT 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz ("GenuineIntel"
686-class) 1.99 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS
,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 266891264 (254MB)
avail mem = 250978304 (239MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/22/03, BIOS32 rev. 0 @ 0xfd891,
SMBIOS rev. 2.31 @ 0xd8010 (15 entries)
bios0: vendor Phoenix Technologies LTD version "R0202B3" date 04/22/03
bios0: Sony Corporation PCG-V505BC(UC)
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP BOOT SSDT SSDT
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (HUB_)
bios0: ROM list: 0xc0000/0x10000 0xd8000/0x4000! 0xdc000/0x4000!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
cbb0 at pci2 dev 5 function 0 "Ricoh 5C475 CardBus" rev 0xb8: couldn't map
interrupt
"Ricoh 5C551 Firewire" rev 0x00 at pci2 dev 5 function 1 not configured
ohci0 at pci2 dev 7 function 0 "NEC USB" rev 0x43: irq 9, version 1.0,
legacy support
ohci1 at pci2 dev 7 function 1 "NEC USB" rev 0x43: couldn't map interrupt
ehci0 at pci2 dev 7 function 2 "NEC USB" rev 0x04: couldn't map interrupt
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x42: couldn't map
interrupt
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "NEC OHCI root hub" rev 1.00/1.00 addr 1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N040ATMR04-0>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA745 DVD/CDRW, 1.05> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801CA/CAM SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
"Intel 82801CA/CAM AC97" rev 0x02 at pci0 dev 31 function 5 not configured
"Intel 82801CA/CAM Modem" rev 0x02 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/16384
pcic0 controller 0: <Intel 82365SL rev 1> has socket A only
pcmcia0 at pcic0 controller 0 socket 0
pcic0: irq 3, polling enabled
biomask fff5 netmask fff5 ttymask ffff
rd0: fixed, 3800 blocks
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
umass0 at uhub0 port 3 configuration 1 interface 0 "SanDisk Corporation
Cruzer Mini" rev 2.00/1.02 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Generic, STORAGE DEVICE, 1.02> SCSI0 0/direct
removable
sd0: 250MB, 512 bytes/sec, 512000 sec total
