J.D. Bronson wrote:
I have a very odd thing happening and I am looking for anything I may
have overlooked while troubleshooting...
(2) identical IBM 305 (8673-82x) machines equipped 100% the same
with dual onboard BGE gig NICs. Nothing else extra added.
Bios is same and options are setup exact.
Are you installing OpenBSD 4.6 - Release (the official CD)?
I had the same problem with an IBM 335 (don't ask me the differences
between an IBM 335 and an IBM 305, I will paste my dmesg at the end) and
I could not figure out the issue, then somebody told me to try a
snapshot instead, and everything worked fine...
I am still not satisfied with the solution, given that now I must follow
-current, now...
I have been searching the Changelog, but in vain... (probably it's just me)
Try with a snapshot...
(if it doesn't work, try a different snapshot... It kinds of reminds me
of Plan9...)
--=--
OpenBSD 4.6-current (GENERIC.MP) #1: Thu Nov 19 14:16:08 CET 2009
r...@dwa.ch23.lan:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) XEON(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,
PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real mem = 4160290816 (3967MB)
avail mem = 4053897216 (3866MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/11/02, BIOS32 rev. 0 @ 0xfd7e1,
SMBIOS rev. 2.3 @ 0xf7141 (43 entries)
bios0: vendor IBM version "-[T2E110AUS-1.01]-" date 09/11/2002
bios0: IBM eserver xSeries 335 -[867665X]-
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC ASF!
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) XEON(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,
PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) XEON(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,
PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
cpu3 at mainbus0: apid 7 (application processor)
cpu3: Intel(R) XEON(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,
PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
ioapic0 at mainbus0: apid 14 pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0: apid 13 pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0: apid 12 pa 0xfec02000, version 11, 16 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PCI1)
acpiprt2 at acpi0: bus 2 (PCI2)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xcc000/0x1800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CMIC-WS Host (GC-LE)" rev 0x13
pchb1 at pci0 dev 0 function 1 "ServerWorks CMIC-WS Host (GC-LE)" rev 0x00
pchb2 at pci0 dev 0 function 2 "ServerWorks CMIC-LE" rev 0x00
pci1 at pchb2 bus 1
mpi0 at pci1 dev 1 function 0 "Symbios Logic 53c1030" rev 0x07: apic 13
int 6 (irq 9)
scsibus0 at mpi0: 16 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: <COMPAQ, BD03685A24, HPB3> SCSI3 0/direct
fixed
sd0: 34732MB, 512 bytes/sec, 71132000 sec total
sd1 at scsibus0 targ 1 lun 0: <COMPAQ, BD036863AC, HPB8> SCSI3 0/direct
fixed
sd1: 34732MB, 512 bytes/sec, 71132000 sec total
safte0 at scsibus0 targ 8 lun 0: <IBM, 25P3495a S320 1, 1> SCSI2
3/processor fixed
mpi0: target 0 Sync at 160MHz width 16bit offset 63 QAS 1 DT 1 IU 1
mpi0: target 1 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
vga1 at pci0 dev 1 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci0 dev 2 function 0 "Intel 8255x" rev 0x0d, i82550: apic 13
int 0 (irq 10), address 00:02:b3:da:76:86
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM registered ECC PC2100CL2.5
spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM registered ECC PC2300CL2.5
spdmem2 at iic0 addr 0x52: 1GB DDR SDRAM registered ECC PC2100CL2.5
spdmem3 at iic0 addr 0x53: 1GB DDR SDRAM registered ECC PC2300CL2.5
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, CD-224E, 2.9B> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05:
apic 14 int 11 (irq 11), version 1.0, legacy support
pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
pchb3 at pci0 dev 17 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x03
pchb4 at pci0 dev 17 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x03
pci2 at pchb4 bus 2
bge0 at pci2 dev 1 function 0 "Broadcom BCM5703X" rev 0x02, BCM5702/5703
A2 (0x1002): apic 13 int 8 (irq 11), address 00:02:55:67:15:5e
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
bge1 at pci2 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5702/5703
A2 (0x1002): apic 13 int 9 (irq 3), address 00:02:55:67:15:5f
brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
--
Mauro Rezzonico <ma...@ch23.org>, Como, Italia
"Maybe this world is another planet's hell" - H.Huxley
