On Sun, Jan 3, 2010 at 2:03 AM, Vijay Sankar <vsan...@foretell.ca> wrote:
I am trying to use a USB 2.0 Gigabit Ethernet adapter
axe0 at uhub1 port 1 configuration 1 interface 0 "ASIX Electronics AX88178"
rev 2.00/0.01 addr 2
axe0: AX88178, address 00:80:c8:ff:ff:a1
ukphy0 at axe0 phy 0: Generic IEEE 802.3u media interface, rev. 9: OUI
0x1e525e, model 0x0014
$ ifconfig axe0
axe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
B B B B lladdr 00:80:c8:ff:ff:a1
B B B B priority: 0
B B B B media: Ethernet autoselect (none loopback)
B B B B status: no carrier
B B B inet6 fe80::280:c8ff:feff:ffa1%axe0 prefixlen 64 scopeid 0x5
B B B inet 10.0.0.212 netmask 0xffffff00 broadcast 10.0.0.255
I can see packets on the interface if I use tcpdump but the status shows
"No
Carrier". However the lights on the adapter are on and I can do a tcpdump
and see packets arriving at the interface.
I tried this on different systems -- a netbook, a laptop, and two desktops
and in each case got the same result (4.5 -stable, 4.6 release, and 4.6
-stable, all i386 and a 4.5 -stable amd64). I also tried changing the media
and mediaopt settings to 100BaseTX, 10BaseT, and 1000BaseT in addition to
the default autoselect.
Will this device work on OpenBSD or if this was a dumb purchase on my part
can someone suggest a USB ethernet adapter that will work properly?
Thanks very much.
Here is the full dmesg and please let me know if any additional information
will be useful.
$ dmesg
OpenBSD 4.6-stable (GENERIC.MP) #0: Sun Dec 27 11:48:54 CST 2009
B B r...@server8.sankars.local:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz ("GenuineIntel" 686-class)
2.10 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
real mem B = 3219075072 (3069MB)
avail mem = 3118567424 (2974MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/21/08, BIOS32 rev. 0 @ 0xfdc34,
SMBIOS rev. 2.4 @ 0xbfecc000 (40 entries)
bios0: vendor Phoenix Technologies LTD version "COLSSF15" date 01/21/2008
bios0: LG Electronics R500-C.CP03A9
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP HPET MCFG TCPA TMOR SLIC APIC BOOT SSDT SSDT SSDT
SSDT SSDT
acpi0: wakeup devices LANC(S4) HDEF(S0) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4)
PXSX(S4) PXSX(S4) USB1(S3) USB2(S4) USB3(S3) USB4(S3) USB5(S0) EHC1(S3)
EHC2(S3) PS2K(S3) LID0(S3) PWRB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz ("GenuineIntel" 686-class)
2.10 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEGP)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 4 (RP02)
acpiprt4 at acpi0: bus 6 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus 8 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpipwrres0 at acpi0: CTHT
acpitz0 at acpi0: critical temperature 99 degC
acpitz1 at acpi0: critical temperature 85 degC
acpitz2 at acpi0: critical temperature 85 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: CMB0 model "BAT1" serial 1234 type LION oem " LG "
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpivideo0 at acpi0: EGFX
acpivout0 at acpivideo0: CRT0
acpivout1 at acpivideo0: LCD0
acpivout2 at acpivideo0: LCD1
acpivout3 at acpivideo0: TV0_
acpivout4 at acpivideo0: DVI0
bios0: ROM list: 0xc0000/0xd200 0xcd800/0x3000! 0xe0000/0x1800!
cpu0: Enhanced SpeedStep 2095 MHz: speeds: 2101, 2100, 1600, 1200, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel GM965 PCIE" rev 0x03: apic 2 int 16
(irq 5)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0425 rev
0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 25 function 0 "Intel ICH8 IGP M" rev 0x03: apic 2 int 20
(irq 11), address 00:e0:91:36:cc:62
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 2 int 16
(irq 5)
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 2 int 21
(irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 2 int 18
(irq 7)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: apic 2
int 22 (irq 10)
azalia0: codecs: Realtek ALC883
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 2 int 17
(irq 11)
pci2 at ppb1 bus 2
iwn0 at pci2 dev 0 function 0 "Intel Wireless WiFi Link 4965" rev 0x61:
apic
2 int 16 (irq 5), MIMO 2T3R, MoW1, address 00:1d:e0:9a:7e:2f
ppb2 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: apic 2 int 16
(irq 5)
pci3 at ppb2 bus 4
"Intel Turbo Memory" rev 0x01 at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: apic 2 int 18
(irq 7)
pci4 at ppb3 bus 6
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 2 int 23
(irq 10)
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 2 int 19
(irq 10)
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 2 int 18
(irq 7)
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 2 int 23
(irq 10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci5 at ppb4 bus 8
cbb0 at pci5 dev 0 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 2 int 20
(irq 11)
"TI PCIXX12 FireWire" rev 0x00 at pci5 dev 0 function 1 not configured
"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci5 dev 0 function 2 not
configured
sdhc0 at pci5 dev 0 function 3 "TI PCIXX12 Secure Data" rev 0x00: apic 2
int
20 (irq 11)
sdmmc0 at sdhc0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 9 device 0 cacheline 0x18, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-T20N, WH01> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 2 int
19 (irq 10), AHCI 1.1
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MK3252GS, LV01> SCSI3 0/direct
fixed
sd0: 305245MB, 512 bytes/sec, 625142448 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 2 int
19 (irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
"Intel 82801H DMI-PCI" rev 0x00 at pci0 dev 31 function 6 not configured
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
axe0 at uhub1 port 1 configuration 1 interface 0 "ASIX Electronics AX88178"
rev 2.00/0.01 addr 2
axe0: AX88178, address 00:80:c8:ff:ff:a1
ukphy0 at axe0 phy 0: Generic IEEE 802.3u media interface, rev. 9: OUI
0x1e525e, model 0x0014
uvideo0 at uhub0 port 4 configuration 1 interface 0 "Foxlink FO13FF-65
PC-CAM" rev 2.00/1.10 addr 2
video0 at uvideo0
umass0 at uhub1 port 5 configuration 1 interface 0 "Cypress Semiconductor
USB2.0 Storage Device" rev 2.00/0.01 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <WDC WD16, 00JB-00GVC0, 0 0> SCSI0 0/direct
fixed
sd1: 152627MB, 512 bytes/sec, 312581808 sec total
ubt0 at uhub5 port 1 "Cambridge Silicon Radio Bluetooth" rev 2.00/31.64
addr
2
ugen0 at uhub5 port 2 "AuthenTec Fingerprint Sensor" rev 1.10/c.10 addr 3
softraid0 at root
root on sd1a swap on sd1b dump on sd1b
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
59 Flamingo Avenue, Winnipeg, MB, Canada R3J 0X6
Phone: (204) 885-9535, E-Mail: vsan...@foretell.ca
--
http://www.openbsd.org/lyrics.html
